I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 RepliesI am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3
[Code]...
I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
I'm running lucid, and my headphones plug is broken, it always detects it is plugged, so the speakers are always off... if i install oss v4, that does not support headphone detection, my internal speakers work flawlessly.
But I want to try the alsa ones, plus i coudn't make all my media keys to work as i intended when i had oss installed...
here is some information that might be relevant code...
i've also tried adding to alsa-base.conf this:
options snd-hda-intel model=laptop enable=1 index=0
I've just switched to slackware from opensuse (and before ubuntu) for few days. Everything is ok , no, is awesome when I was doing my job on run level 3. However, I found there was no sound when I booted it to run level 4 (xfce) trying to play some music on yesterday. After googled a lot, I thought there must be some wrong with my alsa driver, because I couldn't adjust the PCM volume from either alsamixer or amixer. In fact, there is even no PCM section in it, but two sections named "IEC958" and "IEC958 D" instead with no "pvolume" capability. Here is some outputs:
Code:
bash-3.1# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 21
[Code].....
ps: I've reinstalled alsa-lib, alsa-oss, alsa-utils from the installation dvd, no use
I am tweaking an OpenBox install in Squeeze i386 and am trying to set my laptop volume keys to control mpd
jsh@Goat:~$ amixer scontrols
Simple mixer control 'Master Front',0
Simple mixer control 'PCM',0
[code]....
Regarding ALSA and PulseAudio - Explanation on how these two interact. After installing Debian I realised that my sound control (Volume Control: HDA Intel ALSA mixer) was different from what I had with Ubuntu where it would display a window called "Sound properties" in which allowed me to control the sound of each program running - I believe this is the PulseAudio aspect. (If I'm wrong at this point please correct me)
Now I have managed to get PulseAudio setup correctly for me (not as easily as Ubuntu but I moved to Debian to learn, not be spoon fed), however the way in which I did it may of been wrong - pretty much just went to synaptic and installed everything with PulseAudio in its name
Currently the sound icon in my top Gnome panel (within the notification area applet) has the ALSA mixer, sometimes when I log on it has the PulseAudio one (Sound preferences window), I don't really mind which one is loaded thanks to the PulseAudio Volume Control program (under Sound & Video). Is there a way though to stick with just one?
I've had nothing but trouble with Pulseaudio in Fedora 14. I had managed to get rid of it in Fedora 10 with the command: su -c "yum remove alsa-plugins-pulseaudio pulseaudio" I just don't want to have to deal with Pulseaudio anymore. It does not like my sound card and gets in the way. Is there a Linux distribution that does not use Pulseaudio ?
View 4 Replies View Relatedi am having a problem with skype that i wasn't having before, and afaik skype hasn't been upgraded recently, so something else presumably has changed.
because of driver issues i have to use an external usb audio interface to do voip. this interface is not connected to the pulseaudio server. i am able to connect it to jackd and it works fine for both audio in and out. however it no longer shows up in the list of sound devices available to skype. this used not to be the case. i have tried stopping and restarting skype, as well as unplugging and reattaching the interface. the interface does not show up in pulseaudio manager in the lists of devices.
i am using ubuntu 10.04 lts "lucid lynx", and has been encountering problems with audio recently.
i found out for some reason that my system fails to produce sound through pulseaudio, especially when an application is using it (e.g audacious).
the details of the problem:
1. i am using the pulseaudio equalizer from the repository, and i set a program (e.g. audacious) to use pulseaudio so that i can activate the equalizer.
2. while playing, all of my other applications lose the ability to produce any sound, and changing back to alsa during playback (which is using pulseaudio) in audacious indicates that the device is busy. examples include the loss of sound while playing a video from videos.
rough breakdown of what i want to (be able to) do: have sound for all applications using it, for example being able to play a video in videos from my browser and play music in audacious simultaneously.
is there a workaround for this? i'd like to think that there is, but so far my search returned nil.
I'm under Ubuntu 8.04 LTS Hardy Heron using pulseaudio. I've got 2 soundcards : one internal AC97 7.1 without midi (card 0 in ALSA) and a PCI C-MEDIA 2.1 with OPL3 midi (card 3 in ALSA) I have sound in most ALSA or OSS applications with full 7.1 + 2.1 duplex. I have MIDI playback in any ALSA MIDI players (client 29:0 in ALSA).
I'm trying to run Final Doom for W95 on WINE with OSS driver. I have sound effects but no MIDI music. I tryed with padsp and aoss wrappers. I know I can use ALSA driver in wine or timidity, but I would rather use padsp + hardware MIDI if possible. How do I configure ALSA OSS emulation for MIDI playback and check that it's working ? I tryed playmidi but whatever I told it, it couldn't find any midi device.
since updating my laptop to 10.04, I can't get any sound out of my headphones. If I plug the jack in, the sound from the loudspeakers turns off, but the headphones stay quiet.
I have run alsamixer and in fact the volume for the headphones is stuck to zero, and it's not possible to increase it.
My hardware config is posted here: [URL]
What I find funny, is that amixer reports that I don't have the capability of regulating the headphone volume:
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
I have also used the AlsaUpgrade script to get the latest version of alsa, but it still doesn't work.
It was recommended to me that I remove pulseaudio and re-install alsa. All the howtos on reinstalling alsa had instructions for re-installing alsa from the source. Is it possible to re-install alsa from the repos? If so what are the necessary packages that I need to install, for a complete re-install of alsa?
View 1 Replies View RelatedI spent a few days trying to make audio work on my TV connected via HDMI to a PC. The speaker test used by the sound preferences was dead, as was MPlayer. I managed to find a solution for MPlayer, giving the option "-ao alsa:device=hdmi", as specified in this article:So, basically ALSA can see all my devices. This is the output of aplay -l:Quote:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
I've recently switched to Debian Squeeze x64 from Kubuntu 10.04 x64. Overall, I like Debian.
I have one small problem: I play Runescape occasionally, which requires Java. On Kubuntu, I'd use Sun Java, however on Debian it just crashes.
So, I decided to use OpenJDK. Now OpenJDK works fine... But I can't get it to work with ALSA audio output. I installed PulseAudio, and that took care of -that- problem.
Now, currently I have both ALSA and PulseAudio installed. For playback, it works great. PulseAudio is a bit laggy, which isn't too noticeable in Runescape, and for things like media, it seems to work OK. For TF2, which I play through Wine however... No. So, I set that to ALSA, and -that- worked right.
Now comes my main problem: I can't get mic input. I'm trying to use Teamspeak 3(proprietary), and while audio output works, I can't get any input.
TS3 lets me use ALSA or Pulse(along with a couple more), but:
1. Selecting PulseAudio lets me select "SB Audigy Analog Mono", the same thing but a "monitor", and "Default Input Device". None of those work, I get "Error: could not open the selected capture device". On top of that, in the PulseAudio control panel, I get zero level on the monitor, making me think its not setup correctly.
2. Selecting ALSA gives me a whole list of options... But they appear to be audio -outputs-, not capture devices. Also, I get the same error as above.
When running "arecord -l", I get:
Of these, I believe the first one was what worked on Kubuntu. Now, of note is that I'm using my "Line in 2" port for capture; On my previous installations I'd simply set its volume with alsamixer and be done with it.
That all being said, I need a solution to one of these three problems:
1. How can I get OpenJDK to work with ALSA, and thereby remove PulseAudio; get everything standardized with ALSA like I had on Kubuntu, OR
2. How can I remove PulseAudio lag, and get the mic working with that, remove ALSA and get everything standardized with PulseAudio, OR
3. How can I simply make my mic work with the current setup?
Any of those will do. I just need to get my mic working.
At one point, I thought I needed pulseaudio for sound, so I messed around with installing it, even though at the time I had ALSA installed. (suffice to say, I know very little about linux sound). Pulseaudio never did work, I removed it with aptitude. But now ALSA seems to reach to pulseaudio for some reason.
Code:
More confusing is that there are no "alsa" looking processes in ps -A. But apparently, the basics are there
Code:
There's only one thing in init.d that seems relevent to alsa:
Code:
But doing this does not help anything. Does anyone know what to do from here?
And because I'm curious, how come I get sound from Flash Player and Audacity with no problem?
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
I have an imac and i recently decided to dual boot Ubuntu as well.
The sound is fine on the mac partition but the internal speakers dont work on the Ubuntu side.
headphones do work but the volume is oddly low
Nothing is muted on alsamixer, and I think i have the right driver for my sound card
I upgraded from 9.10 to 10.04 and my volume control disappeared from the panel. I have reinstalled pulseaudio but it had not re-appeared. I can't find it in the Add Panel list nor can I find it in the Pulseaudio volume control application as an option.
View 5 Replies View RelatedI've just upgraded to kUbuntu 10.04. I've been using Gnome for a few years now, and felt the need to try KDE again. I've managed to get my NVidia 8200 with HDMI audio working, but have one last annoying issue.
I can't control volume with my RF remote or keyboard.
More to the point, the keys control the sliders in kMix, but to no effect on the sound. This is likely because I need to use Pulseaudio to get my HDMI working. The sliders in Pulse volume control, control the volume nicely. Either I need a way to force kmix to talk to pulse, or a way to re-map these keys to control pulse.
I've got rhythmbox playing and to minimize the effect of the mic input being routed to the computer's main output, I wanted to set the main system volume to be fairly low and turn up the level in rhythmbox. Pulseaudio won't let me do that. If I change the computer's main volume, it changes rhythm box's volume, and vice versa. I don't think I saw that behavior before, no idea what changed.
Am I completely misunderstanding something? I thought the point of an audio server is so that the client applications could produce the signals in their own way and send them through the server. Why do they have to interfere with each other's settings? Is there some preference to make it stop doing that? I looked in pavucontrol, device chooser and manager, don't see anything.
I tried fixing m pulseaudio so it wouldnt mute the sound whenever i set it below 24%, but now i cant adjust the volume. Are there alternatives to pulseaudio? i have kmix installed, will this suffice?
View 1 Replies View RelatedI disabled pulse audio in favor of just working with jack, alsa_in & alsa_out and everything works pretty well except for one thing.
When I enable pulseaudio I can control the volume with my multimedia keys, volume up, volume down, mute.
If I kill pulseaudio not only do I not have volume controls but the little widget in the top bar seems to be broken.
I looked in my /etc/acpi/ folder and see these files relating to volume
/etc/acpi/volupbtn.sh
Code: Select all#!/bin/sh
test -f /usr/share/acpi-support/key-constants || exit 0
. /usr/share/acpi-support/key-constants
acpi_fakekey $KEY_VOLUMEUP
[Code] ....
running xev i get this output for those buttons:
Code: Select allFocusIn event, serial 36, synthetic NO, window 0x1e00001,
mode NotifyUngrab, detail NotifyAncestor
KeymapNotify event, serial 36, synthetic NO, window 0x0,
keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[Code] ....
nothing comes up for those keys, the terminal cursor just blinks.
also one more thing, those keys are set to shortcuts in the settings->keyboard->shortcut menu.
I can control my device with the amixer so I would like to just bind amixers functions to the keys but I don't really know how to go about doing that.
How can I bind amixers commands with those keys?
Is there any way to have Volume Manager in systray without PA?
View 5 Replies View RelatedMy OS is Ubuntu 9.10 64bit. I have been having problems with audio in several of my applications - all of which were fixed by removing Pulseaudio and installing Esound. After uninstalling pulseaudio, there is now no volume bar in the notification applet on my desktop panel.
In addition to this, my volume keys on my keyboard (Lenovo Y550 Ideapad) no longer work. Is there an application I can install that will put a volume bar back on my notification panel (using Esound)?
i recently did a clean install of 10.10 to an old box i had so i could mess around with it and learn. however, all audio (and videos too) would stutter and play very quickly (a 1 minute videos video would play in about 45 seconds). so i followed the solution found here: [url]
this fixed the playback problems perfectly, however, i lost the volume control applet in the upper-right of the screen. reinstalling to volume control and then adding the "indicator applet" back to the panel adds a non-functional volume control icon and an additional mail icon.
Every time I boot into my laptop, there is no sound. Going to alsamixer in a terminal shows that the "Speaker" volume is constantly getting reset to 0, and bringing it back up fixes the problem. How can I get Alsa to remember to keep the speaker volume above 0?
View 3 Replies View RelatedMy internal mic on sony vaio was not working on karmic 64bit. After I followed these instructions [URL] (updated alsa to 1.0.22) I got the microphone working, but now mplayer does not play any sound (although it plays files), as it tries to use pulse by default. However when run with -ao alsa, it works fine.
Other than that, the volume control has not effect on the sound, so every time I need to control it using alsamix.
When I remove pulseaudio, everything seems to be working, except gnome-volume-control and gnome-volume-control-applet do not start, and the keyboard volume controls dont work.
Here are the sound cards I have:
Code:
progre55@progre55:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code]....