Ubuntu Multimedia :: Usb Headset - Cannot Regulate The Volume Of The Phones (output) Anymore With Gnome-volume-control
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
ADVERTISEMENT
Oct 29, 2009
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
View 7 Replies
View Related
Jul 17, 2010
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
Apr 10, 2011
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
View 3 Replies
View Related
Jun 25, 2010
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
View 9 Replies
View Related
Nov 14, 2009
I normally run KDE, but installed GNOME as well on my netbook (running openSUSE 11.2) to try out. However, I noticed there is no longer any volume control applet. The GNOME panel control is labeled 'deprecated', and the volue Fn keys, which work fine in KDE, do not work at all. I tried launching the PulseAudio Volume Control app, but it gives me a "Connection Failed: Connection Refused error". I still have sound, and I can adjust the volumes in alsamixer, but is rather inconvinient. What is the "right way" to adjust volumes in 11.2's GNOME?
View 9 Replies
View Related
May 4, 2010
i get this error brand new lynx installation when i try gnome-volume-control from the command line,
i get this error
Code:
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
what could be the problem?
View 1 Replies
View Related
May 26, 2010
How do i change the channel gnome-volume-control controls? I want it to control pcm but it controls master front. There used to be a setting right in the sound preferences but i think it disappeared with the 9.10 upgrade or at least i can not find it anymore. I've looked on the at gnome alsa mixer while changing the volume and master front gets controlled while pcm is always set to max. The problem with this is that master front does almost nothing to change the actual volume.
If i control pcm with the alsa mixer the volume range is fine. I've found a manual for gnome-volume-control on [URL].en and the pic there actually looks like i remember it looking. But i can not get to that screen. What i have looks completely different. Its a window with the tabs Sound Effects | Hardware | Input | Output | Applications. But there is no sight of any channel settings and the only slider there does the same as the applet one.
View 9 Replies
View Related
Aug 3, 2010
The volume control in the Gnome panel system tray has disappeared from my wife's Ubuntu 10.04 system with the master volume set to zero.I was able to restore sound via System->Preferences->Sound master volume, but this is not particularly convienent. How do I restore the panel volume control? (the speaker icon on the panel, between the Network arrows and Chat/Mail setup icons).
View 3 Replies
View Related
Oct 29, 2010
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
View 1 Replies
View Related
Feb 27, 2011
Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies
View Related
May 21, 2010
It was working just fine with 9.10. After upgrading to 10.0.0.4 I' m getting a very low output, almost inaudible.
HTML Code:
View 8 Replies
View Related
Sep 9, 2010
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies
View Related
May 20, 2010
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies
View Related
Feb 21, 2010
On accident I removed the volume control from the top panel, and when I go back to the panel and click add panel there is no volume control there. Also I use uTorrent in win and the utorrent logo use to go into the panel, but now it loads in a separate window label wine system tray. I have searched around and have not found a fix for this.
View 9 Replies
View Related
Nov 12, 2010
I would like to know how i get the button that let you change the volume that use to be available to add to the panel in some older versions of Ubuntu. If theres something else out there that can do the same and is added to the panel then please do tell.
View 1 Replies
View Related
Jan 11, 2010
I tried upgrading to Rhythmbox 0.12 and in the process something messed up my sound. When i try and start the volume control panel via terminal i get this error:
Quote:
gnome-volume-control: symbol lookup error: gnome-volume-control: undefined symbol: __gst_debug_min
I have googled but havent turned up much success. Also in the same breath, whenever i log out and log back in or even reboot my machine i get this error:
Quote:
The panel encountered a problem while loading "OAFIID:GNOME_MixerApplet". Do you want to delete the applet from your configuration?
I have tried reinstalling gnome applets and ubuntu desktop but the error still persists.
View 2 Replies
View Related
May 25, 2010
I use alsa, and I don't have a volume control applet on my Gnome Panel.When I right click and select "add to panel", there is nothing that has to do with "sound", "audio" or "volume" in the list, and the "Indicator Applet" or "Indicator Applet Session" things have no volume controls, or properties that would let you enable any sort of volume control.
How can I get a volume control in Ubuntu, so I don't have to run aumix in a terminal or something? I've got the thing working now. But does anyone know why the new, fancy "Indicator Applet" volume control doesn't appear? The Gnome Volume Control Applet isn't as nicely featured, although it actually works.
I've been using Linux since Redhat 5, it's beyond me why these sorts of problems are still around. Someone should just put a damn "Volume Control" element in the list of things to add to the panel, even if it doesn't work, perhaps showing an error message.
View 5 Replies
View Related
May 19, 2010
My challenge today is a broken sound mixer in gnome. Yesterday I run 'yum update' and it installed about 200 updates. This morning I rebooted, when double-clicking the 'speaker' icon in the top right corner of my gnome and I got a "crash".
(I have to go to mixer and enable 'front speakers' before I get any sound - thats something else i'd like to fix one day) Here is what bug-buddy has to say:
Distribution: CentOS release 5.5 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
Memory status: size: 265785344 vsize: 265785344 resident: 10158080 share: 7
[Code]...
Any advice would be great - i think I should start by reinstalling the gnome mixer, but not sure which 'yum' that is contained in. I did do some reading about rolling back, but I read that is by default disabled!! Arh! why! only when you broke something you realise you need to turn it on.... o well hey ho.
View 11 Replies
View Related
Jan 16, 2010
installed F12 and noticed that the volume control applet is now all Pulseaudio rubbish, not Alsa like gmixer used to be. So now I don't seem to be able to mute my speakers when I'm using my headset, which in F10 I could do by just muting LFE/Center.Note I don't want the speakers to be disabled when I have the headphones plugged in (like Jack does) I just want to be able to control volume of the mixer channels individually - as sometimes I'll be playing music through the speakers and will receive a Skype call and want to mute the music, but also don't want the Skype sound coming out of the speakers - just the headphones.
I've tried setting up 4.1+input, 5.1+input, 4.0+input etc; but for some reason, even though the PulseAudio mixer thing has 5 individual sliders, they do nothing as they "jump" back to 100% when you slide them - even with the channels unlocked. gmixer and alsamixer do the job, but pulseaudio is the applet and only seems to control the master volume, not the individual channels. Any ideas - or perhaps a way to make gnome-volume-control revert back to actually being gmixer?
View 5 Replies
View Related
Nov 6, 2010
On my Fedora 14 system, the gnome-volume-control-applet manipulates the Front channel, rather than Master (or PCM), which means I continually have to use alsamixer in terminal to adjust the audio volume in the other channels.In earlier version of Gnome (pre-pulseaudio?), this could be configured in the volume control preferences, but no more.Anyone know how I can fix this?My audio adapter is pretty standard Intel stuff. lspci: ode:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
View 1 Replies
View Related
Mar 22, 2011
Right now, it controls both Master and PCM, resulting in weird volume increments. I want PCM to stay at 50 and only change Master with my volume keys.
View 3 Replies
View Related
May 4, 2010
I upgraded from 9.10 to 10.04 and my volume control disappeared from the panel. I have reinstalled pulseaudio but it had not re-appeared. I can't find it in the Add Panel list nor can I find it in the Pulseaudio volume control application as an option.
View 5 Replies
View Related
May 7, 2010
I've just upgraded to kUbuntu 10.04. I've been using Gnome for a few years now, and felt the need to try KDE again. I've managed to get my NVidia 8200 with HDMI audio working, but have one last annoying issue.
I can't control volume with my RF remote or keyboard.
More to the point, the keys control the sliders in kMix, but to no effect on the sound. This is likely because I need to use Pulseaudio to get my HDMI working. The sliders in Pulse volume control, control the volume nicely. Either I need a way to force kmix to talk to pulse, or a way to re-map these keys to control pulse.
View 1 Replies
View Related
Nov 10, 2010
how to set at least my headphone/lineout socket precisely to -15dB at boot up? If I knew how to make amixer commands permanent, I wouldn't be re-raising the issue
The Gnome GUI volume control is fine in normal circumstances but to set it accurately requires a bit too much fiddling, IMO - now if someone were to adjust the programming so a dB readout accompanies slider movement, rather than as a pop-up after adjusting the slider, 'twould be more ergonomic, IMO.
View 4 Replies
View Related
Jul 30, 2011
Tvtime built in volume control stopped working in maverick because it depends on kernel support of Open Sound System (oss) and ubuntu kernels are no longer compiled with this turned on.
You can get an experimental deb of tvtime for maverick here:[URL]
which will work with ALSA sound system.
Here is a partial solution I found on the Russian Ubuntu board by Alexandris if you cannot get the above deb to work for you:
tvtime configuration file at /etc/tvtime/tvtime.xml will allow you to reassign the left and right arrow keys to control whole system volume level while tvtime is running.
Make the following changes in tvtime.xml:
1. comment out existing left and right keybindings by enclosingg them with '<!--', '-->' tags:
Code:
<!--
<bind command="left">
<keyboard key="left"/>
<keyboard key="-"/>
[Code]....
3. save changes to tvtime.xml and start tvtime in a terminal window and see if there is any error messages. The Russian Ubuntu board recommended using "amixer -c default" , but I had to change mine to "amixer -c 0" (the number of my sound card) to get things to work. You might have to do the same...
View 1 Replies
View Related
Apr 27, 2010
Not sure how/when/why it happened the volume control app on my control panel is missing. I tried adding it by doing a "Add to Panel" but the volume control app says it is now deprecated.Is there any other way to change the volume quickly instead of having
to open pulseaudio volume control
View 7 Replies
View Related
Sep 4, 2010
Is there any way, native or within download, of changing audio volume on a per-application basis? I vaguely remember doing this in the vista basic that was installed on this when I got it a couple of years ago, but was removed after a couple of months due to instability. I'd like music streaming thru VLC louder relative to games being played thru Adobe Flash in Chrome (which are at 100% of possible, 100% of the time, no options other than mute).
View 5 Replies
View Related
