Ubuntu :: Logging Into Netgear Router Setup After Passphrase Change?
Jun 29, 2010
I changed the passphrase in my Netgear WNR3500 router. I got the teenager's win7 netbook back online (wireless) no prob by simply changing the security key in windoze and it didn't effect my connectivity but when I attempt to enter my router setup by entering my local IP nothing happens, no response at all. I've rebooted twice and my connection is still very solid but I cannot access the router setup. The ONLY change I made was in the router's "passphrase".Not a big emergency at this point I suppose but I need to know what I need to change in Linux? Or to rephrase, in windoze7 passphrase=security key. In Linux?I can just reset the silly thing I guess but was kind of hoping I wouldn't have to and besides I anticipate the same trouble when setting the passphrase afterward.
I would like to setup a qmail server for learning purposes (if you strongly feel Postfix is better, feel free to let me know). When I started setting up qmail (using Life with qmail), it suggested that having a DNS is the best approach. In the spirit of learning, I decided then to create another server for DNS only, and use that for qmail.
My problem is that, as this is a home installation, the internet is behind a Netgear DG834Gv5 router, on a DSL line that has a dynamic IP address. I am using DynDNS, but also don't mind having to update any DNS entries to keep up with the change, this is not exactly a production-grade setup.
In addition, I also have access to another DNS server where I can create authoritive entries for any domain I register. I have done that for a domain, and would like to point part of that to my home DNS so that I can learn.
So essentially, I would like to have a new zone for home.mydomain.org on my home DNS so that I can create new entries for *.home.mydomain.org such as qmail.home.mydomain.org etc. there.
I assume that this would include port forwarding on the router which is not a problem, but I truly have no clue where to start. I have a very basic install of Cent-OS 5.3 (no X and just Base a few admin and dev tools) and just installed the latest RPM of bind (9.3.x).
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I use Ubuntu 9.04 Jaunty Jackalope.I have been trying to configure a NETGEAR DGN1000 modem router. my manual says that to access the modem for configuration, I should "Type URL... in the address field of [my] browser, and then click Enter."my browser, though, does not seem to find any such page and so I cannot continue the configuration. btw, we had no problem configuring another computer in the house running on windows vista, so that it looks like the cables are all in place, the modem and the line are ok.
I was just wondering because it has not yet become a problem. How would I access my Netgear MR314 router when I don't use Internet Explorer anymore? I used to access the software and make changes in port forwarding and even turn on/off wireless.
I installed Ubuntu 9.10 netbook remix on my Acer Aspire One D250 computer. The broadcom wireless NIC succeeds in connecting to the network but only if I remove the WPA-PSK security in the Netgear router settings. What do I need to change in order to be able to secure my network?
I have a Compaq Presario V2000 running Ubuntu 10.04. I use voip to call international mobile numbers. I'm currently using a Netgear router (at a friend's place) and now, my calls cut in 25 seconds. The call time keeps running, but neither can hear each other after 25 seconds. I've tried using service providers like Actionvoip and Jumblo (as they are cheaper than Skype) and clients like Ekiga and Twinkle. Same It happens on both Wi-Fi and ethernet. There is enough credit I tried using my friends Dell Latitude running Windows 7 with my Jumblo account. Surprisingly, it worked perfect!Previously I used a D-Link router and it worked flawlessly with my system.I fail to understand if it is some settings issue or a bug with Netgear's firmware. If anyone else has come across this issue and has been successful in getting around it
I am trying to configure my ADSL modem/router. According to the manual it should go as this: For the initial connection to the Internet and configuration of your router, you need to connect a computer to the router which is set to automatically get its TCP/IP configuration from the router via DHCP.
I have just setup a debian box, and I want to be able to login to the machine remotely.Currently I have the following setup:Cable Modem -> Netgear Router (DHCP to outside world) -> Debian Box (DHCP for internal network)As I under stand it I have to set my Debian Box to use a static IP, but from there I di not know where to go.Also since my cable modem IP is dynamic, is there some way to have that the debian box get the IP address for the outside world, and e-mail it to my gmail account when it changes, or least every X hours?
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
I have a Netgear DG834 ADSL router (v3) which I have used for a couple of years. Prior to that I had a v2 of the same router, but upgraded for the one that supports ADSL 2+ (here in the UK).
Recently I have been having problems with the connection often being dropped, and when I access 192.168.0.1 for the router admin page, when it is not working I get no IP address listed for that of the ISP's server, and sometimes as well the upstream and downstream speeds are listed as 0 kbps.
Usually this was resolved by rebooting the router.
However, for the last couple of days, when using Ubuntu 9.04, the page of the router at 192.168.0.1 will not load. I have tried numerous different browsers, and none of them will give the router admin page.
When I tried booting from a live CD of Fedora 13, the router admin page came up just fine, no problems (although still not getting a proper connection to the Internet).
I was going to try to use the older router I had, but so far, as I cannot access the router admin page in Ubuntu, I have not done so (not had the time, and now I am at work posting this).
So there must be a problem in Ubuntu that is preventing it showing the router's admin page. The Network connection details show that the router has given the PC an IP address of 192.168.0.6 and the DNS servers are listed, so I know that Ubuntu is talking to the router, but it is not allowing me to access its settings in any way.
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
I have a client that has a basic network that uses comcast cable. He bought a NETGEAR N300 wireless router which has a 192,.168.3.X network and he attempted to add it to his 10.10.10.X network and all is fine. He laptops and such can get to the internet fine. The issue is he cannot get to any of his devices on his 10.X network. I have looked at his comcast router which is controlling his 10.X network to see if I can add addition routing to his 192.X network. but didnt see anything. I also am not to familiar with the N300 wireless router. I was going to have the wireless DHCP turned off and some get it to pull the DHCP stuff from the comcast side but dont see any area to do this.
For my broadband Internet I have several computers connected by cable to a Netgear DG834Gv5 router which has its own firewall.I have the wireless turned off by choice.My desktop and laptop are Linux only. (Ubuntu lucid lynx) I use the same username and password (very strong password) on both.What I want to know is can I set things up so I can browse and copy files between the computers using say nautilus on either computer?if not nautilus then I would happy to be able to do the same via a terminal window.I am not necessarily wanting to be told how but either what to Google for or where to find it.
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
I just installed ecryptfs (debian Lenny). However, when I try to run it (as normal user), I get the following $ ecryptfs-setup-private Enter your login passphrase: And it wont accept any password (naturally since this is the first time I'm running it).
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I have a Dell Studio XPS15 laptop running 11.04 which works flawlessly with my router (it's a broadcom card btw). Now I'm setting up a new laptop for my Father-in-law which is a Dell Inspiron 15 which has intel Centrino 1000 wireless. I've installed and setup 11.04 on it. Everything runs great except..
Now it can see all the access points around so I assume the wireless card is properly detected and working. But when I try to log into my router and give it my password, it just keeps trying to connect and can't. I've double checked the settings with my own laptop and everything seems the same. why it won't log in? I'm leaving it as a dual boot with Win7 and I know that Win7 will log into the same router with the same password.
I should preface this by saying I'm pretty much new to ubuntu. I was a nerd back when I used windows, so I'm fairly knowledgeable about it, but I lost interest right before switching to linux, so I haven't learned much past basic navigation.
I bought a WPN311 wireless card for my homebuilt machine a while back and still can't seem to get it to work. One person told me that after upgrading to Lucid it should work out of the box but that's not the case. It seems my computer doesn't even recognize that the card is plugged in. When I open the drop-down menu to choose which network connection to use, any sort of wireless option doesn't even show up.
My machine:
EVGA 112 CK-NF68-T1 motherboard Intel Core 2 Duo E6750 Two sticks OCZ DDR2 PC2-6400 ATI Radeon X1650 Pro And the Netgear WPN311 in question
I just installed the testing version of Debian with the option to setup encrypted home directories. I used a passphrase that I now want to change to something else. How do I do that?
I would like to log into my router to get the status page programmatically. I have a dynamic IP address and need to update my dynamic dsl service. The router will not display its address with traceroute (all I get is * * *. Once I am logged into the router I can retrieve the status page with wget and parse the resulting file. I cannot seem to get logged into it with wget. Does anyone know how this might be done? If I posted the HTML page that I log into (from wget of the login page) could someone tell me what I need to code. The router is a Trendnet TEW-652BRP. I can get it off the internet but if my connection is down it will fail.
I need to create a simple way to change the language of my system without logging out. I would like to make it so that a user can just click on something and the language of the whole system will change.
I've disabled the traditional gdm gui login screen by adding the keyword 'text' to the kernel line so that it boots to a command line. I then start gnome by using startx and I've noticed that I can log out of gnome back into the command line, then change the environment LANG variable to the new desired language, run startx again and everything is in the new desired language.
I need a programmable way to only restart gnome(not a reboot) so that I can make a script that a user can just click on and it will set the LANG variable then restart gnome(preferably preserving all open applications, but if not, doesn't matter).
