Networking :: Netgear N300 Wireless Router Into Existing Network
Dec 29, 2010
I have a client that has a basic network that uses comcast cable. He bought a NETGEAR N300 wireless router which has a 192,.168.3.X network and he attempted to add it to his 10.10.10.X network and all is fine. He laptops and such can get to the internet fine. The issue is he cannot get to any of his devices on his 10.X network. I have looked at his comcast router which is controlling his 10.X network to see if I can add addition routing to his 192.X network. but didnt see anything. I also am not to familiar with the N300 wireless router. I was going to have the wireless DHCP turned off and some get it to pull the DHCP stuff from the comcast side but dont see any area to do this.
View 2 Replies
ADVERTISEMENT
May 10, 2011
You'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.
View 1 Replies
View Related
Dec 22, 2010
I have an existing network that connects to the 'net via a Linux-based firewall. That system has two ethernet interfaces: one to the DSL modem and the other to the internal switch. Future plans were for adding a second "internal" interface with the idea of moving servers into that (think DMZ). But while I was planning for that, the missus has decided she wants to pick up a Windows laptop and would like to be able to use it wirelessly at home. I have access to a (free!) Netgear WGR614L and was hoping it would work. Unfortunately, I'm unsure how to add the wireless capability to our network.
Questions:
Is it best -- or even possible -- to use one the wireless router for this?
Is it possible to merely hang the Netgear router off the internal switch and set it up for the wireless users? Or...
Would I need to add another ethernet interface to the firewall and hang the router off that? The address of this new interface would act as the default route for the wireless users. Then I'd need to (I assume) add more rules to the iptables configuration to deal with the new network. (I sort of like this option -- it it's actually feasible -- as I can easily shut down any wireless access by logging into the firewall and stopping the interface connecting the wireless router.)
I've taken a look at the setup guide on the CD that came with the router and it assumes that you have a modem connecting your PC to the internet. The instructions have you placing the wireless router between the modem and that PC. For our network, that would have the wireless access coming into the "dirty" side of the firewall. (Not what I would like.)
View 4 Replies
View Related
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
May 18, 2011
how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.
View 1 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Jan 12, 2011
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies
View Related
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
Jul 4, 2010
I have managed to setup ndiswrapper and am able to see my wireless network but cannot connect to it.
I am using NDISWRAPPER and a Netgear WNDA3100 driver (I think this is Atheros-based) to connect through a Netgear WN111 USB Wireless dongle to my existing wireless network. I am running 9.04 on a Fujitstu-Siemens laptop.
I am aware that the WNDA 3100 driver is not the intended driver for my WN111 dongle, but it is the only driver that showed "hardware present" when loaded. All others (I tried perhaps 5 or 6) showed driver installed but no info about hardware.
When I try to connect to the network it tries for a while, occasionally prompting me for the passphrase, and then eventually stops.
I would like some help figuring out what else I need to do. I feel I am nearly at the solution. My guesses are as follows (for what they're worth):
1. Could it be something to do with the WPA security?
2. Could it be something to do with this, output from dmesg?
Quote:
[ 20.737363] ADDRCONF(NETDEV_UP): wlan1: link is not ready
3. Could I need to set some further parameters in the network manager?
View 9 Replies
View Related
Apr 24, 2010
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
View 2 Replies
View Related
Mar 9, 2011
I've just literally gone out this morning and bought the Belkin N300 Dual Band USB for my Deskstation running Maverick Meerkat. At first i put the stick in and nothing happened. So i went to System>admin>Windows wireless drivers and clicked on there. I put the CD in the drive that came with the dongle and found the drivers folder on the disk. I then installed the .inf file in the XP folder. It connected straight away as easy as that.
I'm really frustrated though as it loses conectivity and then asks me for my WAP password on connection, but then doesn't seem to connect. I unplug the dongle and then hit connect again and it connects.
If i use the same dongle on XP i have no problems what so ever, so i know its not a signal strength issue.
View 8 Replies
View Related
Apr 27, 2010
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
View 3 Replies
View Related
Jan 1, 2010
I installed Ubuntu 9.10 netbook remix on my Acer Aspire One D250 computer. The broadcom wireless NIC succeeds in connecting to the network but only if I remove the WPA-PSK security in the Netgear router settings. What do I need to change in order to be able to secure my network?
View 2 Replies
View Related
Jul 12, 2010
I have a Netgear DG834 ADSL router (v3) which I have used for a couple of years. Prior to that I had a v2 of the same router, but upgraded for the one that supports ADSL 2+ (here in the UK).
Recently I have been having problems with the connection often being dropped, and when I access 192.168.0.1 for the router admin page, when it is not working I get no IP address listed for that of the ISP's server, and sometimes as well the upstream and downstream speeds are listed as 0 kbps.
Usually this was resolved by rebooting the router.
However, for the last couple of days, when using Ubuntu 9.04, the page of the router at 192.168.0.1 will not load. I have tried numerous different browsers, and none of them will give the router admin page.
When I tried booting from a live CD of Fedora 13, the router admin page came up just fine, no problems (although still not getting a proper connection to the Internet).
I was going to try to use the older router I had, but so far, as I cannot access the router admin page in Ubuntu, I have not done so (not had the time, and now I am at work posting this).
So there must be a problem in Ubuntu that is preventing it showing the router's admin page. The Network connection details show that the router has given the PC an IP address of 192.168.0.6 and the DNS servers are listed, so I know that Ubuntu is talking to the router, but it is not allowing me to access its settings in any way.
View 1 Replies
View Related
Mar 19, 2011
For my broadband Internet I have several computers connected by cable to a Netgear DG834Gv5 router which has its own firewall.I have the wireless turned off by choice.My desktop and laptop are Linux only. (Ubuntu lucid lynx) I use the same username and password (very strong password) on both.What I want to know is can I set things up so I can browse and copy files between the computers using say nautilus on either computer?if not nautilus then I would happy to be able to do the same via a terminal window.I am not necessarily wanting to be told how but either what to Google for or where to find it.
View 2 Replies
View Related
Jan 14, 2010
I am running ubuntu server x64 as a router. I currently have 2 LAN cards, eth0 and eth1. and I want to add wireless capabilites to the machine.I was wondering if any of you know which card I could use?I want it to be supported in ubuntu server and it must be n-draft, as it is to replace a Edimax n-draft router.
View 1 Replies
View Related
Feb 8, 2010
To start off I have a Rosewill rnx-n2x wireless adapter and a Dlink 4500 router. The problem is, the wireless network manager detects every wireless router in the neighborhood, except mine. I see this persons, and this persons, but no "My router Not yours". I even tried doing the hidden network setup and still nothing.
I have read that the rnx n2x isnt supported by linux, although I've seen solutions to make it work (which didn't work, mkdir command kept getting denied during make) link to what I'm talking about: [URL]. What I don't get though, is that if the rnx n2x isnt supported by linux, wouldn't I not be getting my neighbors connections to begin with?
View 1 Replies
View Related
Nov 1, 2010
I changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.
View 4 Replies
View Related
May 26, 2009
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
View 4 Replies
View Related
Apr 1, 2010
I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
View 15 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
Jun 9, 2010
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
View 1 Replies
View Related
Jan 2, 2011
I have an Ubuntu 10.04. It connects perfectly with a Netgear wireless to the internet at my work place. But i cant connect it to my home Netgear network. It connects to the router. Receives IP address. But no internet. But I'm able to connect to internet using ethernet. I'm also able to connect to internet wireless in my Windows.
View 5 Replies
View Related
May 16, 2010
I'm running Slakware 13 (kernel 2.6.29.6) on a inspiron 1525. I use ndiswarper to use the BCM4312 wireless device without any problem but the fact that the driver does not support the Monitor mode. I therefore bought a NetGear WN111 v2 usb stick but I can't get the linux driver.
Even ndiswarper does not work but it's may be because I don't have the right .sys .ins files. (just to try)
So, I wonder if someone has already successfully manged this device working on Slackware 13?
Actually, I don't know if we can make lets say wlan0 and wlan1 working at the same time. I've try many drivers mentioned on Ubuntu forums but none of theme work with me.
Many people talk about wpa_supplicant but I don't know if I really need it to make my wn111v2 working. And what is a firmware?
View 2 Replies
View Related
Apr 10, 2010
My wireless disconnects after around 10 minutes. It does not reconnect automatically. I've to pull out the usb dongle and then put it back in to connect again.
[Code]....
View 9 Replies
View Related
Feb 2, 2011
How do I install my Netgear Wireless Adopter on ubuntu 10.10? it tries to search for it but doesn't find it.
View 9 Replies
View Related
Mar 14, 2011
System: HP Vectra VL Ubuntu Version: 8.10,
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
[Code]...
View 3 Replies
View Related
Dec 10, 2010
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies
View Related
Mar 5, 2010
i can't get my wg111t netgear wireless adapter to work. I followed the help thing by installing ndisgtk, which installed successfully. I was able to load up the file on the cd that also the help page said. The problem is that the computer won't load up the adapter as it would load up my cd's and flash drive. Here's how i installed ndisgtk. I installed the files ndiswrapper_common, ndiswrapper_1.9, and then the ndisgtk_0.8.5.All of these were for i386.
View 1 Replies
View Related
Mar 24, 2010
I just bought a Netgear N PCI wireless network card and was hoping Ubuntu 9.10 would recognize it. I installed the card and was using XP on the machine (Dell Dimension 2400) and decided to install 9.10 on this computer instead (XP = slow!). I'm not sure how to get Ubuntu to recognize it. I was hoping this would be a 'plug and play' install
View 4 Replies
View Related
