Networking :: Can Use Nautilus Or Terminal For LAN File Sharing Through Netgear Modem Router?
Mar 19, 2011
For my broadband Internet I have several computers connected by cable to a Netgear DG834Gv5 router which has its own firewall.I have the wireless turned off by choice.My desktop and laptop are Linux only. (Ubuntu lucid lynx) I use the same username and password (very strong password) on both.What I want to know is can I set things up so I can browse and copy files between the computers using say nautilus on either computer?if not nautilus then I would happy to be able to do the same via a terminal window.I am not necessarily wanting to be told how but either what to Google for or where to find it.
View 2 Replies
ADVERTISEMENT
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
May 18, 2010
I use Opensuse 11.2 & Edge/Gprs Modem to connect Internet.I configured /etc/wvdial.conf & /etc/resolv.conf. Now I can connect Internet using this command "wvdial MYNET" in terminal.Now I want to share my internet using Lan card & Netgear Router. If i connect my PC with Router using wire & change option ON BOOT find this device in ifup then it'll show in ifconfig command.
My Router IP : 192.168.0.1 & It gives my PC an IP automatically : 192.168.0.2
I can ping my router.. even I can browse Router Admin page in browser. No problem there.But now If i want to connect my net using wvdial command... net connected... but no data passing!!! If i disable Lan card in ifup then Edge/Gprs net connection again OK!
View 9 Replies
View Related
May 9, 2011
I use Ubuntu 9.04 Jaunty Jackalope.I have been trying to configure a NETGEAR DGN1000 modem router. my manual says that to access the modem for configuration, I should "Type URL... in the address field of [my] browser, and then click Enter."my browser, though, does not seem to find any such page and so I cannot continue the configuration. btw, we had no problem configuring another computer in the house running on windows vista, so that it looks like the cables are all in place, the modem and the line are ok.
View 1 Replies
View Related
Jun 27, 2010
I am trying to configure my ADSL modem/router. According to the manual it should go as this: For the initial connection to the Internet and configuration of your router, you need to connect a computer to the router which is set to automatically get its TCP/IP configuration from the router via DHCP.
View 5 Replies
View Related
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
Apr 27, 2010
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
View 3 Replies
View Related
Jan 1, 2010
I installed Ubuntu 9.10 netbook remix on my Acer Aspire One D250 computer. The broadcom wireless NIC succeeds in connecting to the network but only if I remove the WPA-PSK security in the Netgear router settings. What do I need to change in order to be able to secure my network?
View 2 Replies
View Related
May 18, 2011
how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.
View 1 Replies
View Related
Dec 29, 2010
I have a client that has a basic network that uses comcast cable. He bought a NETGEAR N300 wireless router which has a 192,.168.3.X network and he attempted to add it to his 10.10.10.X network and all is fine. He laptops and such can get to the internet fine. The issue is he cannot get to any of his devices on his 10.X network. I have looked at his comcast router which is controlling his 10.X network to see if I can add addition routing to his 192.X network. but didnt see anything. I also am not to familiar with the N300 wireless router. I was going to have the wireless DHCP turned off and some get it to pull the DHCP stuff from the comcast side but dont see any area to do this.
View 2 Replies
View Related
Jul 12, 2010
I have a Netgear DG834 ADSL router (v3) which I have used for a couple of years. Prior to that I had a v2 of the same router, but upgraded for the one that supports ADSL 2+ (here in the UK).
Recently I have been having problems with the connection often being dropped, and when I access 192.168.0.1 for the router admin page, when it is not working I get no IP address listed for that of the ISP's server, and sometimes as well the upstream and downstream speeds are listed as 0 kbps.
Usually this was resolved by rebooting the router.
However, for the last couple of days, when using Ubuntu 9.04, the page of the router at 192.168.0.1 will not load. I have tried numerous different browsers, and none of them will give the router admin page.
When I tried booting from a live CD of Fedora 13, the router admin page came up just fine, no problems (although still not getting a proper connection to the Internet).
I was going to try to use the older router I had, but so far, as I cannot access the router admin page in Ubuntu, I have not done so (not had the time, and now I am at work posting this).
So there must be a problem in Ubuntu that is preventing it showing the router's admin page. The Network connection details show that the router has given the PC an IP address of 192.168.0.6 and the DNS servers are listed, so I know that Ubuntu is talking to the router, but it is not allowing me to access its settings in any way.
View 1 Replies
View Related
Jan 12, 2011
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Jul 29, 2010
how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies
View Related
Oct 1, 2010
I do not, and will not, use this feature. This banner to open the configuration is just using up space.
I am sure that this is very simple but I can't seem to figure out how to get the bugger off of Nautilus.
View 4 Replies
View Related
Apr 26, 2010
Linux box could act as a router? I have one machine running ubuntu, another running windows 7, a cable modem and a switch. Is it posible to share the connection between both computers by making the linux box a "router"?
View 7 Replies
View Related
Dec 24, 2010
I have a sprint usb 3g modem that plugs in via usb. I want to be able to share that Internet though an Ethernet port so I can connect another PC or my playstation so I can steam movies or just use the INTERNET on another puter. Iv tried lots of stuff I found on Internet like firestarter for one but it doesn't want to set up right.
View 4 Replies
View Related
Jul 7, 2011
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies
View Related
Oct 25, 2010
ubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies
View Related
Aug 9, 2009
i want to ask a question. sometimes i use a gprs modem to connect to the net. the gprs modem uses the usb port. i've connected this pc to another machine through crossover cable. the problem is that when there are two active connections, firefox can't load anything. also how can i share the gprs modem with my other pc that is connected via crossover?
PS. in my active network connections it shows:
eth0- the NIC
and auto eth1 - the gprs modem
i have also tried to change the firefox preferences but to no avail.
Both my computers run on FC11.
View 1 Replies
View Related
May 28, 2010
i'm totally new to Linux and Ubuntu. I own a huawei 3g modem through which I connect to the internet. I plan to share the internet from that connection between my Vista pc and another pc running Ubuntu Lucid Lynx. The computer I plan to use to share the internet, let me call it Server, is equalling running Ubuntu Lucid Lynx. My Server perfectly recognises my modem and connects to the internet using it and I can browse.
I plan to connect the routers internet port to my Server using my servers network card. Then i intend to let the router do the sharing of the internet to the other computers on its own. I don't have any idea how to go about doing this. Originally, I tried a direct connection between my Server and the other pc running Lucid Lynx without bothering with the router and using the following settings which i found on an online tutorial:
Server ip 192.168.0.1
netmask 255.255.255.0
and no gateway
then on the client
client ip 192.168.0.5
netmask 255.255.255.0
gateway 192.168.0.1
I used open DNS servers for the DNS
However, i was unable to browse the internet from the client even though a connection between the two was established. Then I thought to myself, why go through this trouble, I have a router so why not go ahead and use it. But then I do not know how to do that. Using the router will enable me to effortlessly connect all my computers irrespective of operating system and ease the network creation process.
View 5 Replies
View Related
Jan 25, 2011
I m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. i want to ask how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not and if the answer is yes or no how comes !
View 1 Replies
View Related
Feb 7, 2010
3G USB modem, in and using wireless router out (via ethernet) to lappy, Wii ect.We don't have a phone line just mobile phone and mobile internet because it is mobile.I have a wireless router only but need wireless to improve my standing within the house because I am seen as a net hog!
I did come across a Virgin wireless modem but it is soooo painfully slow (tested it against the USB dongle modem 3-4kb same test 1 min later 280-300kb's USB.) The wife could make herself a cuppa just waiting for the facebook login page to load!Would it need to pass on the connection bcause the USB is fully setup? then wireless is setup or would it be required to have a 3rd security setting ect in between?It would be good to use a low spec computer because I have a few. Headless too, maybe?
View 8 Replies
View Related
Jul 28, 2011
I have an Ubuntu server that I need to access remotely while I am at school. The server's internet connection comes first through a DI-604 broadband router and then through a Netgear Wireless router:
ethernet wall jack --> Broadband Router --> Wireless Router --> Server's ethernet port
I can manage to get the SSH to work with the current IP address (dynamic) by connecting the server directly to the broadband router, but I cannot set up DNS (ddclient on the server, Namecheap for domain registrar and nameserver) with it. I can set up DNS on the router with no issue, as it has the DNS client built in, but I cannot get the SHH to connect through both the modem and the router as mentioned above. Best case scenario, this can be fixed without having to get anything new, but if that is the case, recommendations of a new setup
Other reference info - ISP at server is Verizon Fios, broadband router set to PPPoE.
View 1 Replies
View Related
Jan 22, 2010
I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem. I just need to know how to configure my modem so that it works with my wireless router (D-Link DI-524).
I have a long wired ethernet wire to satisfy my academic needs for the internet at the moment but my mother is not able to surf the internet and it would be more convenient for myself to put the wire back to my desktop and have my laptop browsing wirelessly.
View 1 Replies
View Related
Dec 20, 2010
not *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies
View Related
Mar 4, 2011
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
View 1 Replies
View Related
Dec 16, 2010
my laptop seems to have a bad HDD, and I was thinking of trying to make it a "thin client." However since it is a laptop obviously I want to take it places. Is it possible to make a terminal server and "thin client" connect through the internet and not just LAN?The reason I quote thin client is because in my mind I am still going to need to use some HDD so I can connect to the internet and find my server.
To make things easier to read refer to the above as "question 1" and the velow as "question2" Thank you. And sorry for the inconvience. These topics I felt were to similar to make separate topics.I also have another question, the files I have on my server can be accessed by anyone on the network(added a second HDD and network shared it) how can I make it so that the LAN clients have to "login" (or it uses their computers login info to send them to only their files? And if that is possible can we expand it to allow me to use those logins through the internet?
View 1 Replies
View Related
Oct 8, 2010
I was just wondering because it has not yet become a problem. How would I access my Netgear MR314 router when I don't use Internet Explorer anymore? I used to access the software and make changes in port forwarding and even turn on/off wireless.
View 2 Replies
View Related
Aug 24, 2010
im trying to be able to tether my android cell phone to my fedora 13 to use as a router/modem i have gotten it to work on a friends Ubuntu OS i used the app easy-tether but it will work not on fedora
View 11 Replies
View Related
