Using the ubuntu live cd 9.10 I get weird error messages when shutting down the system, sometimes it is this one:
device removed: /freedesktop/Hal/devices/net_80_00_60_0f_e8_00
Other times it is bunch of errors saying something like:
i/o error/end request/dev/sector ****, with all different sector numbers..
These happens even when I have not installed anything, not using any flash drives etc...
Offlate I installed F11 i586 on my laptop. F11 shares the hard disk with Vista Home Premium 32-bit. The problem is that when running F11 (or even Ubuntu), my system shut off suddenly(not a normal OS shut down, but a sudden power off without any warning). This could have been a hardware trouble(heating) but it doesn't happen with Vista.
Machine specifications:
Maker: Toshiba
Model: Satellite L305D-S5881
AMD Turion X2 Dual Core Mobile Processor RM-70
3072 MB 800 MHz SDRAM
I don't want to open up my machine unnecessarily, if it isn't a hardware issue.
I am not sure how to verify the bit length of the machine and the OS and does it create a compatibility issue ?
Your advise would be highly appreciated.
Raman
I installed Fedora 12 and after I wantd to shut down the system. I waited but fedora not going to shut down. I got black screen with Power Down
View 7 Replies View RelatedINIT : Id "x" respawning too fast: disabled for 5 minutes. I pressed ctr+c and logined and type startx. I am using KDE, but now i am in GNOME. What is this error message. I reacently update all software on OS.
View 2 Replies View RelatedAfter I installed the "GNOME Software Development" group with yum, I couldn,t log into the Gnome desktop. An error message says "Oh no! Something has gone wrong. A problem has occurred and the system can't recover. log out and try again", and it repeated every time I tried to log in. I created a file "gnome-shell.desktop" in the ~/.config/autostart directory, the error message no longer appears, but I get only a wallpaper which means no top bar or else. The file's content is as follows:
[code]...
When i shutdown my SuSE 11.2 box with all current updates i have started to notice an error message.Something about failed to unmount, trying remount as read only or something like that.The trouble is its almost the very last message that appears and its not on the screen long enough to read properly.Somewhere is there a logfile that i can recover this error message from so that i can make some sort of an attempt to resolve the issue, post the whole message here in more detail?
View 3 Replies View RelatedI just installed ubuntu 10.04 although everything works fine I have a problem related to sound, When I click Preferences/Sound I get the message "waiting for sound system to respond" and actually it does not respond at all. Although, I have downloaded, compiled and installed linux drivers from realtek website it did not fix the problem. internet which is simply deleting .pulse folder and restarting it didnt work either.At the moment I am using terminal alsamixer for controlling sound level but even the maximum attainable volume is too low.
View 9 Replies View RelatedI am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View RelatedMy Ibuntu 10.4 system can't be updated because of error message:"Segmentation faulty tree" coming from apt-get check. It reads 50% of then stops. It shows reading the package lists, the Done.
View 1 Replies View RelatedThe letters in brackets in bookmarks in Opera? and how can i delete them because they are not visible in manage bookmarks?
Also how can i get rid of the "Shut-down in 60 secs" message when i shut it down? Or at least can i alter the time till shutdown? Ubuntu 9.10 64 bit by the way
There is a centralized FTP server which are accessed by clients to develop some web development project and to achieve this the clients are using ftp service. The problem is when they are trying to copy any files and directories they are getting the following error: "Message reported from the file system: FTP copy not supported,use move instead"
I've checked all the permissions and they are all OK. I don't know why this is happening. they can create and move files and folders but can't copy files and folders.
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
When reinstalling ubuntu 10.04, I get an error message that reads "the ext4 file system creation in partition #1 of SCSI3 (0,0,0) (sda) failled.
View 1 Replies View RelatedI just installed Squeeze on an older PC. Installation seemed to go fine. But when it booted up on the installed system for the first time, I could not login - username/password failure. I tried every possible typing error and CAP LOCK error I could have made - still nothing.
I brought up a console window and tried logging in as root - same problem.
I booted into single user mode and entered passwd command to set new root password - I got a SYSTEM ERROR message from the passwd command.
I booted to a Live CD, went to /etc/shadow and deleted the encrypted password. Rebooted on the hard drive, went to console window and logged in as root, with no password required. So far so good. I entered passwd command to set new password and got the same SYSTEM ERROR message.
The machine seems fine when running on the Live CD, and the install seemed to go fine.
I boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 Replies View RelatedI can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.
View 3 Replies View RelatedStarted slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies View RelatedUsing IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI am running Ubuntu 11. 04 on my 160gb HD, which is making funny noises and could be on its way out. I have in my PC a 500gb HD on which I would like to install 11.04, but, althogh the dis has installed OK on my laptop, and on my 160HD on my desktop, it will not install on my 500gbHD, everytime I try I get the message "no root file system is defined, please correct this from the partitioning menu"
Snapshot of my drive............................
Screenshot.jpg
How do I partition it.
I am experiencing an issue with the system shut down.
Everything works fine, but the system is not able to automatically power off and I have to manually switch it off.
How could I fix this behavior?
I am using debian testing on my office pc, but i need to access it's desktop from time to time. So i need No machine/teamviewer software that can provide me with possibility to interact my desktop. The problem is, that i want to run shadowed session type, because teamviewer is not good for me. So, when i run no machine in shadowed mode, it crashes with message "The connection with remote server was shut down, please check your network settings and try again." The log is here:
[Code]....
I'm trying to install KDE 4,4 on my Netbook, Asus Eee PC 1201n. I've just done a clean install, instlaled my graphics drivers and now trying to upgrade to KDE 4.4. This is the message I get when trying to use the 1Click installer from the OpenSuse site. "System Management is locked by the application with pid 3249"
View 2 Replies View RelatedSo I've got a backup server that has a daily cronjob to back up all my systems. My desktop PC is usually in sleep mode to save power. So my backup server has to wake up the desktop via wake-on-LAN to start the backup job. When the backup script is done, my backup server sends a shutdown command to the desktop to put it back in sleep mode.
The trouble is that SSH is timing out during the shutdown process and waits a ridiculous amount of time before giving up and allowing my backup server to move on to the next backup script. Here's the portion of my backup script for the desktop that does the shutdown stuff:
Code:
ssh user@host.lan '/usr/bin/shutdown -p +1'
Here's what cron sends me via e-mail:
Code:
Read from remote host host.lan: Connection timed out
real 164m46.280s
user 5m16.160s
sys 1m39.760s
Normally the entire backup job will only take about 5 minutes. But because of SSH timing out, it takes 164 minutes!
As a matter of detail, my backup server is running Ubuntu 9.10, and the desktop is Windows 7 x64 with Cygwin. The -p option for the shutdown command in Cygwin is for sleep mode.
Make: Fujitsu-Siemens
Model: LifeBook P7120
For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'
The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.
[Code]...
My system just shut itself down as I was using it. I'd like to try to understand why.
First, I noticed there are 1 to 4 messages per second in my messages.1 through messages.4 files in /var/log going back to September 27. It probably started before then, but I don't have older logs.
There almost nothing else in the messages log but these messages, millions of them. They look like these:
Quote:
Then just before shutdown, there are a few dozens of these:
Quote:
And then right at the end, a switch to runlevel 0. I did not initiate that. Something else did. And finally a dbus-daemon segfault.
Quote:
What other logs can I look at?
I just installed 11.3 and Gnome yesterday and all went well except that the system will not shut down, it simply reboots. I've tried shutting it down using halt and shutdown now as root and each time the machine reboots. I didn't have this problem with 11.1.
View 7 Replies View RelatedI am using lenny on an Intel 5200 dual core machine with 2 GB RAM
The problem facing is sometimes The dialog box "The sustem will immediately shut down" is shown and goes to power off. I thinks it is connected with a hardware problem. But It is difficult to trace out what is the problem and in which part of the hardware it is.
The motherboard of this computer was complaint and it was replaced by the company (It is seen than it is the same motherboard with one IC replaced)
The problem is difficult to identify since it is not happening every time. When the service persons are here it is working fine. But when i works with the computer seriously, the problem arises - mostly in night. I have checked the power, voltage etc - everything fine. Also it is in linux, service persons don't pay attentions to solve the problem.
Is it the problem with RAM? It is a new RAM. Even if it is bad I can't replace it because it is working! and in windows (service persons check it with windows only)
I have an online server which I can not reach any more !
Code:
normally works just fine but now there is a timeout...
Code:
Status of csf:csf and lfd have been disabled, use 'csf -e' to enable Status of lfd:lfd is stopped. The only thing I have is a management-interface with a command prompt(luckily !) You can see that any firewall is disabled.
Still I can not reach my server. Not through webmin via the public address, not through the VPN on the private address (10.10.0.1). So no webmin. I cannot reach my server via ssh. I cannot ping my server on the public IP-address from my client.
What else besides the firewall can restrict my access to my server ?