I just installed 11.3 and Gnome yesterday and all went well except that the system will not shut down, it simply reboots. I've tried shutting it down using halt and shutdown now as root and each time the machine reboots. I didn't have this problem with 11.1.
View 7 RepliesI tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
If I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
Offlate I installed F11 i586 on my laptop. F11 shares the hard disk with Vista Home Premium 32-bit. The problem is that when running F11 (or even Ubuntu), my system shut off suddenly(not a normal OS shut down, but a sudden power off without any warning). This could have been a hardware trouble(heating) but it doesn't happen with Vista.
Machine specifications:
Maker: Toshiba
Model: Satellite L305D-S5881
AMD Turion X2 Dual Core Mobile Processor RM-70
3072 MB 800 MHz SDRAM
I don't want to open up my machine unnecessarily, if it isn't a hardware issue.
I am not sure how to verify the bit length of the machine and the OS and does it create a compatibility issue ?
Your advise would be highly appreciated.
Raman
I installed Fedora 12 and after I wantd to shut down the system. I waited but fedora not going to shut down. I got black screen with Power Down
View 7 Replies View RelatedRecently I installed openSUSE 11.2 (GNOME) on my HP DC7100 machine. I was very excited about it until shortly, when I started discovering the problems.
One of the more severe problems is that I can't shut down the system:
Pressing the "Shut Down" button brings me back to the login screen. From there I still can't shut down, but I also can't log-in any more. The only option left is the hard shut down.
"Restart" sometimes works, but often ends up in the login screen too.
As far as the "Suspend" and "Hibernate" is concerned, I did not experience any problems there.
By the way, after the installation, I consumed all available updates (including the kernel upgrade). I'm not aware it the problem existed before the updates.
I have a desktop computer with Intel(R) Pentium(R) 4 CPU 3.00GHz,3.010,60 MHz speed,1,5 GiB RAM,nVidia GeForce 6600.When i'm going to shut down the computer the machine just don't do it.I don't know why.Everything else working fine.
View 9 Replies View RelatedA few days ago I installed Nvdia fx 5200 drivers and after that I had on my grub menu Opensuse 2.6.31.8-0.1 Desktop along with Default. Since Desktop worked alright and Default would work only in terminal, I erased Default from Grub menu. Yesterday Update Applet warned about some updates, I installed them and had on Grub menu 2.6.31.12 Desktop with 2.6.31.12 Default. When I wanted to shut down computer, the screen froze. It works when I reboot but if I want to shut down, it doesn't do this, I have to make a forced shut down. How can I solve this problem?
View 5 Replies View RelatedIs there a combination of key-strokes to shut down 11.3?
View 4 Replies View RelatedI powered up and saw to my consternation that several Firefox Tabs did not load (server unavailable). I gave it several tries, but it did not work. Hiding Firefox, I saw that KWallet was waiting for a password. After that, I entered the password for SU, and Firefox worked. Then it struck me:
I did not login - repeat: I DID NOT LOGIN - , no username, no password. And the password for KWallet is not the same as my user PW.
If I am correct, openSuSE 11.4 (64 bits) may have security problem. Do: Start Firefox 4.0 Beta 12 Start some application that needs a password stored in KWallet, do not enter the PW Place the Firefox window over the KWallet wind for the PW Do a shutdown via the Icon Wait 30 seconds after power down Turn the power on
If you now enter the session without specifying any user name or PW, then this message has some merit; if not, I will try to duplicate the issue tomorrow.
Just installed Gnome 3.0 on Open Suse 11.4, now can not find "shutdown or restart" tag, having to shutdown computer by using terminal
View 9 Replies View RelatedBrand-new to Linux. Using a computer with openSUSE 11.3 (64-bit) freshly installed. Install went flawlessly without any kind of error messages.
Hardware used: MSI X58 Eclipse, Intel i7-920, 6 GB memory, Seagate 500 GB SATA.
openSUSE is the only OS installed.
After the install is finished, all programs work fine. HOWEVER when I try to shut down/restart the computer nothing happens! I basically have to use the power off button to shut down...
I'm using opensuse 11.2 and a week or so ago it suddenly stopped shutting down the computer, or rebooting. It shuts the screen down and that seems to be it, so I have ti switch it off. However a day or so later it began to reboot when asked, but still won't shut down. I'm dual booting it with Unbuntu 9.04 using grub2, but it's been that way for many months without problems.
View 9 Replies View RelatedI am experiencing an issue with the system shut down.
Everything works fine, but the system is not able to automatically power off and I have to manually switch it off.
How could I fix this behavior?
My system just shut itself down as I was using it. I'd like to try to understand why.
First, I noticed there are 1 to 4 messages per second in my messages.1 through messages.4 files in /var/log going back to September 27. It probably started before then, but I don't have older logs.
There almost nothing else in the messages log but these messages, millions of them. They look like these:
Quote:
Then just before shutdown, there are a few dozens of these:
Quote:
And then right at the end, a switch to runlevel 0. I did not initiate that. Something else did. And finally a dbus-daemon segfault.
Quote:
What other logs can I look at?
I am using lenny on an Intel 5200 dual core machine with 2 GB RAM
The problem facing is sometimes The dialog box "The sustem will immediately shut down" is shown and goes to power off. I thinks it is connected with a hardware problem. But It is difficult to trace out what is the problem and in which part of the hardware it is.
The motherboard of this computer was complaint and it was replaced by the company (It is seen than it is the same motherboard with one IC replaced)
The problem is difficult to identify since it is not happening every time. When the service persons are here it is working fine. But when i works with the computer seriously, the problem arises - mostly in night. I have checked the power, voltage etc - everything fine. Also it is in linux, service persons don't pay attentions to solve the problem.
Is it the problem with RAM? It is a new RAM. Even if it is bad I can't replace it because it is working! and in windows (service persons check it with windows only)
I have an online server which I can not reach any more !
Code:
normally works just fine but now there is a timeout...
Code:
Status of csf:csf and lfd have been disabled, use 'csf -e' to enable Status of lfd:lfd is stopped. The only thing I have is a management-interface with a command prompt(luckily !) You can see that any firewall is disabled.
Still I can not reach my server. Not through webmin via the public address, not through the VPN on the private address (10.10.0.1). So no webmin. I cannot reach my server via ssh. I cannot ping my server on the public IP-address from my client.
What else besides the firewall can restrict my access to my server ?
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
So I've got a backup server that has a daily cronjob to back up all my systems. My desktop PC is usually in sleep mode to save power. So my backup server has to wake up the desktop via wake-on-LAN to start the backup job. When the backup script is done, my backup server sends a shutdown command to the desktop to put it back in sleep mode.
The trouble is that SSH is timing out during the shutdown process and waits a ridiculous amount of time before giving up and allowing my backup server to move on to the next backup script. Here's the portion of my backup script for the desktop that does the shutdown stuff:
Code:
ssh user@host.lan '/usr/bin/shutdown -p +1'
Here's what cron sends me via e-mail:
Code:
Read from remote host host.lan: Connection timed out
real 164m46.280s
user 5m16.160s
sys 1m39.760s
Normally the entire backup job will only take about 5 minutes. But because of SSH timing out, it takes 164 minutes!
As a matter of detail, my backup server is running Ubuntu 9.10, and the desktop is Windows 7 x64 with Cygwin. The -p option for the shutdown command in Cygwin is for sleep mode.
I am using Ubuntu 9.04. Years ago, I did UNIX and DOS line commands, but I am 66 and dim, though my doctor says he still thinks I have my marble.Anyway, my Linux shuts down automatically faster than I want it to.How does one control this?
View 3 Replies View RelatedI want to know the exact command to shut down a red hat linux server.I was using init 0. but some one said its not the proper method to shut down my linux server.If not which is the exact command
View 6 Replies View RelatedUsing the ubuntu live cd 9.10 I get weird error messages when shutting down the system, sometimes it is this one:
device removed: /freedesktop/Hal/devices/net_80_00_60_0f_e8_00
Other times it is bunch of errors saying something like:
i/o error/end request/dev/sector ****, with all different sector numbers..
These happens even when I have not installed anything, not using any flash drives etc...
Do active localhost server instances automatically gracefully shutdown upon system shut down?
View 1 Replies View RelatedI have a flash drive that I regularly use on my laptop. If I unplug the flash drive without first unmounting it, I get a popup notification of a kernel failure (with diagnostics sent to kerneloops.org). Then, if I attempt to shut down the system via the console, it hangs on "The system is going down for halt/reboot NOW!" and doesn't actually shut down. Using Gnome's graphical System > Shut Down feature just logs me out and sends me to the login screen; the shutdown feature from there does nothing. I have to disconnect the power cord on the laptop in order to shut it down, and I don't like doing this.
System: 32-bit Debian Squeeze stable with kernel version 2.6.32-5-686, running Gnome 2.30.2, on an Acer Aspire 5570z.
I use Keepassx to store my passwords and keep the keyfile for my password database on the flash drive in question. I mention this just in case it helps determine what's causing the failure.
dmesg has quite a bit to say about this:
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
I recently switched from fedora 14 to 15. Today my computer suddenly shut down during an update, as I thought it overheated I decided to clean the cooling system and reapply thermal paste. However, now the system won't boot anymore ("kernel panic - not syncing : VFS: unable to mount root FS on unknown-block").
I would like to either solve this booting problem, or mount the fedora 15 filesystem and recover some files. Whichever is easier.
I have another drive with fedora 14 (antec below) which boots fine:
Code:
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View Relatedwe have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I have a problem with KDE.. I go to Main Menu > Leave > Shutdown OR Restart OR Log Off I press
nothing happens...
This started a few days ago when I disabled some services..
Don't know what service is associated...
I tried using command line and everything works...
init 0
shutdown 0
shutdown -r 0
all work and bring down the system but my settings and open applications are not saved.