Ubuntu :: Letters In Brackets In Bookmarks In Opera - Not Visible - Shut-down In 60 Secs Message
Jan 24, 2010
The letters in brackets in bookmarks in Opera? and how can i delete them because they are not visible in manage bookmarks?
Also how can i get rid of the "Shut-down in 60 secs" message when i shut it down? Or at least can i alter the time till shutdown? Ubuntu 9.10 64 bit by the way
Using the ubuntu live cd 9.10 I get weird error messages when shutting down the system, sometimes it is this one: device removed: /freedesktop/Hal/devices/net_80_00_60_0f_e8_00
Other times it is bunch of errors saying something like: i/o error/end request/dev/sector ****, with all different sector numbers.. These happens even when I have not installed anything, not using any flash drives etc...
Recently I faced a problem in typing in English in OpenSuse 11.3.When I try to type in English it shows me Greek letter and worse than that I think it is really Greek (not only in font) because when I enter my passwords or try to type a command in terminal I get error,I tested with UK and USA and all other English languages and I still have this problem. I even do reset in my keyboard layout setting and in KDE setting but it didn't help.
I am using debian testing on my office pc, but i need to access it's desktop from time to time. So i need No machine/teamviewer software that can provide me with possibility to interact my desktop. The problem is, that i want to run shadowed session type, because teamviewer is not good for me. So, when i run no machine in shadowed mode, it crashes with message "The connection with remote server was shut down, please check your network settings and try again." The log is here:
What do the numbers in brackets mean? (I tried looking, but I don't know how to start to search for the answer to that without being too vague). I've noticed they're nearly always progressive (increasing). Do they just refer to the event number? And in my log file viewer, why is there a dmesg and a dmesg.0?
When using Evolution and forwarding a message, the composer automatically wraps the subject in [square brackets], I've looked at Preferences but cannot see where to disable them,
Offlate I installed F11 i586 on my laptop. F11 shares the hard disk with Vista Home Premium 32-bit. The problem is that when running F11 (or even Ubuntu), my system shut off suddenly(not a normal OS shut down, but a sudden power off without any warning). This could have been a hardware trouble(heating) but it doesn't happen with Vista. Machine specifications: Maker: Toshiba Model: Satellite L305D-S5881 AMD Turion X2 Dual Core Mobile Processor RM-70 3072 MB 800 MHz SDRAM I don't want to open up my machine unnecessarily, if it isn't a hardware issue. I am not sure how to verify the bit length of the machine and the OS and does it create a compatibility issue ? Your advise would be highly appreciated.
In the file /var/log/kern.log, I see kernel logs in the following format, Oct 6 11:18:30 machine kernel: [212.443755] Some logs... What are the numbers in the bracket [212.443755] stands for?
i installed ubuntu 11.04 on my new desktop recently. however the system hangs for 1-2 secs while in use. this problem occurs about once every 30secs. i have re-installed the os twice now but the problem is not getting resolved. the mouse and kb stop working and the problem is driving me nuts.
The way I organize all my files into their folders, they add up quickly. I like having a quick way to keep more frequently accessed folders at the top of the list in explorer. In windows, folder "[zippidy do da]" would appear above folder "aardvark" because of the brackets, but Ubuntu's file browser ignores the brackets, making my old method ineffective. I could put a zero in front of such folders
I came across this reult of the type command (hashed) in another post. (see below).
Code:
fraespappp8:/data/apps > type topic_file_publish.sh topic_file_publish.sh is hashed (/data/apps/pnbgstk/publication/topic_file_publish.sh) This (result = hashed) is new to me.
I am attempting to copy files to a 1GB SD card using my built-in SD card reader on my notebook computer. This function worked great on Hardy Heron. However, I switched to Karmic Koala about a week ago. Upon insertion of the SD card, the entire desktop (including mouse cursor) will freeze for about 30 seconds. Then, the SD card apparently mounts with an icon showing on the desktop. I can then open Nautilus and view the files and folders on the card. When I attempt to copy a file over to the SD card, the transaction looks as though it completes because the file icon shows up. However, Nautilus suddenly unmounts the card. When I check the file, I find that only half or less has copied over the the SD card.
The problem is I need the php program to send member email confirmation which contains a confirm link. Run every min may still make the member wait. So I like to make it to run every 20 or 30 secs.
I don't want to put the code to send email on my sign up page as that's no good.
But I don't want to put a sleep 30 sec on my php script and going on loop. If it failed in the middle then it may wait abit to start.
What can be done to achieve my goal and what's the best way?
Making a php script to run as a daemon process? Is that possible and okay?
I have followed this guide [URL] to setup a diskless cluster based on ubuntu server. Every thing is fine in the boot process except this:
After the client boots vmlinuz and init.rd, I see some information and after a minute I see:
Code: IP-Config: no response after 60 secs - giving up /init: .: line 3: can't open /tmp/net-eth0.conf kernel panic - not syncing: Attempted to kill init!
It is strange since it gets an ip address when it want to boot. I don't know what is wrong with it.
I have a Compaq Presario V2000 running Ubuntu 10.04. I use voip to call international mobile numbers. I'm currently using a Netgear router (at a friend's place) and now, my calls cut in 25 seconds. The call time keeps running, but neither can hear each other after 25 seconds. I've tried using service providers like Actionvoip and Jumblo (as they are cheaper than Skype) and clients like Ekiga and Twinkle. Same It happens on both Wi-Fi and ethernet. There is enough credit I tried using my friends Dell Latitude running Windows 7 with my Jumblo account. Surprisingly, it worked perfect!Previously I used a D-Link router and it worked flawlessly with my system.I fail to understand if it is some settings issue or a bug with Netgear's firmware. If anyone else has come across this issue and has been successful in getting around it
I installed Ubuntu 10.10 alongside my Windows 7 os in a dual boot config. I used an installation disk and allowed the ubuntu installer to do all the resizing of partitions, installing of grub, etc. The install is working great and I haven't needed to boot my windows os since which is great. The only complaint I have is that it takes it takes a bit longer to boot than windows did for some reason. The culprit is a blinking cursor that comes up and remains for about 12-15 seconds before the grub menu appears. I already altered the boot option for the grub menu so that ubuntu is default and the option to select another os only appears for 3 seconds but I don't think this is related since the delay occurs before those options appear. I'm not really sure what is causing the delay. Is it looking for the loader? If so, is there a way to edit the configuration so doesn't have to search? As I mentioned, the install is running great otherwise.
I am using an external USB keyboard to my laptop. Suddenly (after using this keyboard for 6 months), some randomly times I need to press the button 6-7 times before something appears on screen. This happens randomly, I may be able to type a whole paragraph without problem, and suddenly I can't type anymore for few seconds. My system is opensuse 11.3 and it happened last friday 9/10 ( if it is related to any update). I tested the keyboard to another pc and it is working. I tested another keyboard to my laptop and I still have the same problem.
I am using gnome-shell (3.14.4-1) desktop environment and i have a problem that i can not find any config to solve it, Lock screen turn off and on again display every 15 seconds with out any reasonable reason !!!!
I tried connecting my Debian laptop to a vintage Apple //e using a Super Serial Card on the Apple side and a USB to serial adapter on the laptop side. It kind of works -- I can send data over to the Apple using e.g. echo "foobar" > /dev/ttyUSB0 or via minicom --, but every 20 seconds (quite exactly!) some 4 random characters appear on the Apple's screen (mostly tildes, sometimes a pipe). This does *not* happen when booting the laptop into Debian rescue mode; so I guess it must be some (daemon?) process messing around with the usb serial device in regular intervals.
I tried to disable quite some services, but the problem remains.I don't have any clue how I might catch the evil-doer in the act -- virtually all serial monitors I've so far read about allow only monitoring the interaction of a known program/process with a serial port. But in this case I first have to actually find out which process is talking to the serial port in the first place.
Using 11.04/natty on i386/32 Gnome [Ubuntu classic - no effects] When I go to System -> Preferences -> About Me the wheel spins for 5 secs and then closes.
When I started the PC like always, it started normal been having issues actually, every time I start up the PC it freezes when I put the password in and its going to the desktop and stuff, then I have to re-start it or it re-starts itself, or just go to where I have to type in the password again, and then it does it again after a while, after 3 or 4 times of that it goes to the desktop normally and works fine, but today it took some time, and after it finally loaded the panel was all odd, everything appeared in block letters, like when Mozilla can't recognize certain language it just shows you blocks, that appears, but I check the system, where images and all that, everything appears normal, it only seems to be the panel. wondering if its that I need to re-install the panel, or something else, also this odd file appeared too, it says (invalid coding) next to it, when I go to upload an image or something the files there, I wonder if that has something to do, or maybe its just been there who knows (and the freezing part too), anyways, I'm new here so I don't really know if this place was the right place to post this up OTL theres a screenshot in an attachemnt thing (if I put it up, it would appear to big)
since today's update my keyboard is acting strange. Letters e a c b f d won't come out right. They show for example e. and then I can't type anything more except the same letter over and over, until the eeeeee transforms into some weird symbol, sometimes asking me to choose between several ones...already checked languages and keyboard settings, nothing will do...
how to remove the underlining from letters on KDE (on menus and buttons for keyboard shortcuts I think)? I am currently running Kde4.4. If this can not be done through KDE would it be possible to modify the actual font itself to remove the underlining option? I never use the keyboard to navigate and with the font I am using the underlining seems to touch the letters themselves. Also, on a side note, does anybody know what the command is to bring up the "loguout, turn off computer and restart" menu (the one that comes up when Ctrl+alt+del) are pressed?
I have strange issue with ubuntu's terminal lately it's showing up a space after some letters such as " t l f j i " when I tried to write a command by any of these letters I have got it, this problem is preventing me to implement any correct command so is it pkg issue need to re-install or I have to do something ?my OS is ubuntu 11.04 natty with gnome unity GUI/ UTF-8 | all my fonts that are using on my machine is Arial.
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message