OpenSUSE Network :: Wireless Card Realtek 8187 Connectivity - (Firefox) "the Server Can't Be Found"
Dec 3, 2009
I have a Toshiba Satellite L305-SP6944C, Pentium Dual Core 2.16, 2GB RAM, 160GB hard drive, DVD-RAM UJ880AS, display 15.6 TFT widescreen, ethernet Realtek RTL8101E/RTL8102E PCI Express, WLAN Realtek RLT8187, Opensuse 11.2 and KDE 4.3.1. Installation was OK and finally the wireless card is working... but I don't have conectivity bacause in the browser (Firefox) appears a message saying "the server can't be found"
I follow the howto write by Swerdna. With ndiswrapper I install the XP driver for RLT8187, KnetworkManager is in charge of connections showing both eth0 and wlan0, the wireless sign of router Dlink DIR-280 is OK, in the dialog box of network connection I put the mac address of the wlan card but I think that is not the problem.
Other thing that I missed is that I don't find boot.ini at any directory to add modprobe ndiswrapper in the boot sequence, in etc/init.d/ appears a "boot" file, is this file that I have to change to modprobe ndiswrapper??
View 9 Replies
ADVERTISEMENT
Aug 27, 2010
I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...
Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
View 9 Replies
View Related
Jul 12, 2010
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
View 2 Replies
View Related
Jan 11, 2010
The card is recognized by Ubuntu 9.10 and I have it in the network manager. I followed one tutorial about creating an ad-hoc network and all looked good, until I actually wanted to connect (or to be more precise, my machine is a host for other computers). The wireless icon just loops endlessly, without connecting and eventually I get "Wireless network - disconnected" message.
So, the main issue here is - connecting! I just can't. Also if you know/have some good tutorial for ad-hoc,
Code:
ivan@ivan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"internat3"
[Code]...
View 2 Replies
View Related
Aug 28, 2009
i use fedora11 and try to use wireless i find driver for chip Realtek RTL8187 but want to know command to install it. i save folder of driver on desktop in folder name rtl8187_linux_26.1010.0622.2006has like this
[Code]....
View 9 Replies
View Related
Mar 26, 2011
How can I get Suse 11.4 to see my wireless adaptor? Would love to get this working so I don't have to upgrade my old XP OS to Win 7.
linux@linux:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: i915 .....
View 9 Replies
View Related
Jan 7, 2010
Got a laptop with a RTL8187B wlan card, installed opensuse 11.2 on a 50gb partition. Card was detected straight away but only connects when I enter ip addresses manually, DHCP don't work.
When it is connected it always stays at a speed of 1mb/s and it cannot ping my router or anything else.
Me kernel is 2.6.31.8-0.1-desktop
Searched around the forums but no love, tried compat-wireless but it started crying about dependencies. Modprobed it too..
View 8 Replies
View Related
Nov 30, 2010
Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
View 9 Replies
View Related
May 22, 2011
When I do "sudo zypper up" than it gives me error like this:
Code:
Retrieving repository 'openSUSE-11.4-Non-Oss' metadata []
File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/distribution/11.4/repo/non-oss/'
Abort, retry, ignore? [a/r/i/?] (a):
But I can access Index of /distribution/11.4/repo/non-oss from firefox browser.(This is old problem from Opensuse version 11.0 when I first tested it.)
See screenshot here:
View 1 Replies
View Related
Nov 1, 2010
I have Slackware(x32) 13.1 installed on my computer. Everything runs just fine except it doesn't seem my wireless card.I looked around and found a driver on the Realtek website. But, after I installed it, linux wouldn't boot. It would just hang. The driver did help my get the card detected, though.
On lspci, I found:
02:00.0 [Realtek company name here] RTL8101E/RTL8102E
03:00.0 [Realtek company name here] Device 8172
On windows, it said I had RTL8191SE. I am confused as to which card I have and which driver I need.I reinstalled the driver and rebooted. I then turned off my ether card via bios. Then I rebooted. Linux then booted just perfectly. However, I couldn't get the wireless to work. I was freaking and then left to go do something else with my hands. Then I realized I had the card turned off.
I mentally punched myself. >.>
View 2 Replies
View Related
Sep 11, 2010
My father has configured his network and the computer has connected to the wired network. The problem is firefox says the server cant be found at the given address. The wired router says its connected to the network and yet firefox doesn't see the router admin page or network.
View 3 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Nov 7, 2010
I have just downloaded realtek rtl98192se for my wireless pci card. after extracting the file, the user guide states to go to the top level of the directory and execute the command 'make' to compile the driver
I have done so but I get the error: make: *** /lib/modules/2.6.18-194.el5/build: No such file or directory. Stop. Make: *** [all] Error 2
View 9 Replies
View Related
Aug 24, 2010
It is detecting the wireless networks in the surrounding area but it isn't connecting.
View 11 Replies
View Related
Dec 26, 2010
Running Linux mint 10 After the installation the wireless connection worked but it was very weak and intermittent. The icon would show 1 bar or none. iwconfig showed the rate at 1Mb/s. The same card worked fine in windows and on a 32bit version of linux. Installed new driver from realtek. Now the iwconfig readings look good and the icons shows 2 and sometimes 3 bars. But it will not connect at all! I even turned off all security on my router but it would not connect.
View 14 Replies
View Related
Jan 22, 2011
I'm new to Debian, and new to Linux at all (well, I have used Linux sometimes in the past; Red Hat 7.1, Knoppix 3.6, Ubuntu, and some other distros but by no meaning I could call myself a real, full-time Linux user). But that's what I want to change. After some research I've decided on Debian. At first I wanted to download a stable build (5.0.7) but I've seen 6.0 RC1 was released just recently and I've changed my decision to get this version instead. Anyway, I'm currently downloading the DVD (slow connection, 2Mb/s only) and I've spotted this page in the meantime.
Thing that got my attention is "Potential installation problems with RTL8169-based network cards". I've checked my motherboard (Gigabyte GA-EP45-DS3) and I have Realtek 8111C on it. As far as I understand, it's not RTL8169-based but any real problems with my Realtek 8111C card, I don't want to install an OS from which I couldn't browse web. I know I had big issues with it while installing Mac OS X Snow Leopard but that's what I could expect when installing OS on unsupported hardware. So any way to install Debian 6.0 RC1 on a computer with Realtek 8111C network card?
View 2 Replies
View Related
Sep 12, 2010
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
View 4 Replies
View Related
Oct 12, 2010
I am trying to install EDUP 802.11n Wireless USB Install (RTL8188SU) on my recently installed ubuntu platform and I need a driver for it. I downloaded the one from the Realtec website and I got a bunch of files that I have no idea what to do with them. (h[URL]... I am compleatly new at Linux and I have no idea how to install anything. I am pretty nifty with Windows but this is my first time trying Ubuntu and Linux. So can I have some step by step guide to install this. I am good at following clear instructions correctly.
Aditional Info: I tired the hardware thing already or whatever its called and only NVIDIA drivers are there and my USB is not recornized because it needs a driver.
View 9 Replies
View Related
May 5, 2010
I am running SLED 11 and My Networkcard is Intel PRO/Wireless 5300. In short, it is not there anymore! I mean I was connected and everything and the next time I restarted It could not detect any wireless network. I deleted the wireless network card in hopes that the OS will automatically detect it on startup and set it right but NOPE. When I check the hardware information in YAST, it is listed there and it is also working under Windows.
View 4 Replies
View Related
Jan 12, 2010
i've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
View 8 Replies
View Related
May 28, 2010
I am not very experienced using Linux but I never had big problems with Ubuntu. Now I am busy writing my PhD thesis and therefore I had to install CentOS to use one lousy program that I could not get to work under Ubuntu. However, it seems to be quite fine and it is working well besides one fact: The network card stopped working. In the beginning it was working fine although the speed was only on the level of 100mbit. The switch and the LED on the card indicated gbit connection, though. I tried to install the driver for the 8168 card which reduced the card to 100mbit (indicated by the LED on the switch and the card).
Ethtool indicated it was gbit capable but I couldn't activate it. After reading more and more I figured I have to use the 8169 driver again and live with the 100mbit. Unfortunately, after uninstalling the old driver and reinstalling the driver 8169 the network isn't working at all anymore. The network-manager displays the card as inactive and when I try to turn it on it complains about the wrong mac address, which I am not able to change to the proper one. I am using CentOS 5.5 with the latest updates.
View 17 Replies
View Related
Aug 6, 2011
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
View 3 Replies
View Related
Feb 12, 2010
this isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies
View Related
Sep 8, 2009
I just recently installed CentOS 5.3 and to make a long story short I found the entry for my wireless card under the network settings but when attempting to activate the card the system locks up. I have to reboot at that point as nothing responds (keyboard, mouse, etc..).
Running the command /sbin/lspci -v reveals the following about the wireless card:
01:00.0 Ethernet controller: Realtek Smeiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
View 3 Replies
View Related
Mar 29, 2010
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies
View Related
Dec 31, 2009
I have HPDX2480 computer system where i have installed RHEL4u5 having kernal 2.6.9-55. now how can i install and configure my NIC?
View 1 Replies
View Related
Feb 11, 2011
I'm using Kubuntu 10.04.2 LTS on a Bangho laptop. Kernel 2.6.32-28-generic i686. My card is: Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter iwconfig wlan0 gives me:
Code:
wlan0 IEEE 802.11bg ESSID:"Default_WLAN"
Mode:Managed Frequency:2.442 GHz Access Point: 00:06:4F:8D:B9:AF
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr: off Fragment thr: off
[Code]...
Usually when this happens, for 10 or 20 seconds it appears to be connected (i.e. the heart symbol is there) but I can't ping google or my router, then it "realizes" it's disconnected. It takes one or two attempts to reconnect successfully by pressing the "active" button. Meanwhile throughout the disconnections and re-connections the signal is very strong (98%).
I had the same problem with my old access point, at first I thought it was the cheap/old hardware, so now I bought an "ENCORE ENDSL-A2+WIGX2 | ADSL 2+ Modem with 4 Port Wireless Router". The problem persists only with a stronger signal.
View 1 Replies
View Related
Apr 8, 2011
I'm having making network/internet connection with my laptop. I have:Toshiba 1415 S173laptop
NetGear WG511T pcmcia card using madwifiNetGear WPNT511 pcmcia card using windows driver via ndiswrapperSlackware 12.2In both cases the card is recognized, and I can get a list of access points with iwlist.I can set the card to connect to the desired access point. I can use dhclient to get an ip address from the remote dhcp server. This works, the card is assigned a valid ip address on the desired network.Once I do this, however, I cannot access any network resources, no Internet, and no other devices on the network can see, ping, or access my laptop. It does this with with both cards, using madwifi or the windows driver via ndiswrapper.
View 9 Replies
View Related
Feb 25, 2011
I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
View 9 Replies
View Related
