I am just started using Ubuntu yesterday and I have been trying to install a program (Vim). I was following a tutorial and got to the following step:
- sudo dpkg -i vim73_20101114-1_amd64.deb
When run this command... I get the following message: Processing triggers for man-db ... Nothing happens after this and the regular terminal command line appears once again.
After entering an aptitude command: Processing triggers for shared-mime-info ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Unknown media type in type 'fonts/package'
Unknown media type in type 'interface/x-winamp-skin'
Note that '/usr/share' is not in the search path set by the XDG_DATA_HOME and XDG_DATA_DIRS
environment variables, so applications may not be able to find it until you set them. The
directories currently searched are:
- /root/.local/share
- /opt/kde/share
- /opt/kde/share
-
Processing triggers for hicolor-icon-theme ...
I would like to ask whether there is a way to postpone or delay message processing on postfix mail server. E.g. to postpone message transfer/relay for 5 minutes to be able to dequeue mis-targeted emails.I couldn't find anything because these keywords mislead to performance problems.
View 2 Replies View RelatedI start a program from terminal, say gedit. The terminal will be recognized as processing, and I cannot use the same terminal for other tasks until I close the gedit.
So without opening another terminal, how can I use the terminal while processing the program?
I have installed Ubuntu onto a old Dell Dimension 2400, with a Intel Celeron and i845GV chip. I am trying to install Processing and it says:
"If you set up a launcher (e.g. in Ubuntu), be sure to set the working directory to the folder that contains the shell script. It's not smart enough to find its own path."
How do you set up a launcher and set the working directory? Also, I have no idea about the chips in PC's but processing.org says it should run on. Ubuntu Linux 9.04 (on i686 and x86_64). Can i845GV support processing?
We are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies View Relatedhow to program in C or C++, but I'm pretty decent with python ( I've only used this on Windows ) and I was wondering if there was a way I can display my notifications like that as well. If you could just tell me what causes these messages to display like this I'm sure I could do some investigating of my own.
View 5 Replies View RelatedI`ve recently bought a Genius Slim Star 220 USB keyboard. The problem is that when I switch between keyboard layouts with shift+alt this also triggers scroll lock. I`m running Ubuntu 10.04 x64 kernel 2.6.32-24 EDIT As I`ve just found out it`s not shift+alt that trigger scroll lock, but the fact of changing the keyboard layout. I`ve tried several other hotkey combinations as well as changing layout with the taskbar applet. All the same.
View 1 Replies View RelatedI've been using Ubuntu for a few weeks now, and I really enjoy using it. Whenever I click Suspend, it suspends just fine, but when I try to resume the session again, it jumps back to life for a few seconds and then it sounds like it just cuts the power. Nothing is ever displayed on the screen.
View 1 Replies View RelatedOn Ubuntu 10.04 I would like to setup udev to execute a backup script when a specific USB drive is inserted. Udev detects the USB drive, but my script is executed 7 times instead of just once. Can't figure out what's wrong.
My udev rules file:
Code:
/etc/udev/rules.d# cat 20-stick.rules
ACTION=="add", ATTRS{vendor}=="Kingston", ATTRS{model}=="DataTraveler G2 ", RUN="/usr/local/bin/sync.sh"
Dummy backup script: connecting USB drive results in 7 times date written to /tmp/test
code....
I start play on linux to use ms office this message keeps popping up before it. Is anything wrong or should be done
View 8 Replies View RelatedTrying to load ubuntu 11.04 and error message comes up cannot find autorun program. how do i get the program on my computer so i can download the upgraded version of ubuntu I have tried rebooting and many many other things. it loaded just fine on my desktop right over my pc linux os.
View 1 Replies View RelatedI'd like to know if something like this already exists :have an ecryptfs encrypted user account on a laptop that accepts two logins, 1st logs normally, the second triggers a system format
View 6 Replies View RelatedWhen I click on a folder in "Places" the appearance editor starts up and says that for example "Home Folder" or "Documents" does not appear to be a valid theme. XDG-open has the same results. Folders on the desktop open fine. I am at a loss here, I can't figure out what I did.
View 1 Replies View RelatedWe're syncing users from Active Directory over to our linux LDAP server (Red Hat Directory Server). The user names on the AD side are all written in uppcase letters, which is the company policy.The uppername usernames causes problems when setting up /etc/sudoers, since uppercase words are interpreted as aliases. For example, if I add user KENNETH to a User_Alias (i.e. something like "User_Alias ADMINS = KENNETH"), I will get a warning from visudo which expects KENNETH to be an alias and thus not a username. Despite the warning, sudo does seem to work correctly. But is there a way to tell visudo or sudo that usernames are uppercase, and should not trigger a warning? Or are there other ways to go about this sort of thing?
View 2 Replies View RelatedI'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedI have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?
View 3 Replies View RelatedI would like to use a linux box to display message in big big big into the monitor in something nice.
Freevo like would be great [url]
Big fonts and fullscreen to display it... would be perfect.
I was trying to download 'grisbi' the bank program and I had to stop the download, not I get a message saying E: dpkg was interrupted, you must run 'sudo dpkg--configure-a' to correct the problem
E;_cache->open() failed, please report.
I have also tried to d/load KMymoney and I get to the part where it says (extracting files from archive) then I get a box saying Extraction completed successfully then:- open the destination or close
If i close nothing happens when I go to open destination I am taken to a list of files and after that I don't know what to do.
I'm trying to perform a clean installation of 8.0.0-i386 from a CD. Seven consecutive attempts all result in the same issue: Almost immediately after commiting the disk partitioning settings (i.e., to begin formatting), the computer does a hard restart. I have tried doing the partitioning as early as possible in the installation process, just in case the system is running out of memory; I have also tried using the lowmem option. I suspect the problem may be related to my very old hardware...
Micronics serverboard 440BX chipset*
Dual Pentium II 450MHz CPUs*
1GB ECC RAM*
Adaptec AHA-2940UW SCSI adapter
IBM Ultrastar 36GB UW-SCSI HDD
ATAPI CD-ROM
Matrox G100 AGP video card*
*starred items are all original parts from an Intergraph server with validation/verification stickers attesting to their intercompatibility
No POST errors, the HDD passed verification using the Adaptec ROM utility, all unnecessary hardware removed
Could it be that I need an older release or some custom-compiled kernel? The only thing I could come up with on the web was that a lot of people have a similar failure with modern distros on non-PAE CPUs, but the P-II should not be susceptible to this problem.
I am trying to run a .NET program with mono. I got the following:
Code:
Parser Error Message: Assembly ActiveReports.HtmlExport, Version=3.3.0.1999, Culture=neutral, PublicKeyToken=cc4967777c49a3ff not found
This means it requires ActiveReports, but could not find any Linux version of that software. So, is there any Linux alternative for it?
My system is Debian/sid (unstable).
I currently using Ubuntu 10.04 LTS.Whenever I try installing any new package(*.deb) it will display red error message that I don't understand.What happen? and how to solve this problem?
View 8 Replies View RelatedIn a single main() function,so need signal handling. Use Posix Message Queue IPC mechanism , can ignore the priority and other linked list message,to implement the scenario:
View 1 Replies View RelatedI've recently installed Fedora 10 on a space computer. It works fine until I tried to install Mplayer.
As i've read on a number of sites that there is a dependency problem, I went through loads of websites looking for a fix. I found nothing that would work.
Now i'm stuck with a problem that i think might be worse. If I start a .RPM I get the following message.
Now when i try to install other things it's hit and miss, I tried to install VLC and got the same message.
I've got no idea what i've done to get to this point and i don't really want to reinstall fedora 10 again.
I was noticed the below error message when I was installing the SKYPE linux version downloaded from the official web site of SKYPE. Actually I have already installed the QT4 with the highest version correctly even I can used the QT UI for programming now. But still I faced the problem of lack of libraries afterwards.
[root@IT60 LinuxSoftware]# rpm -ivh skype*.rpm
error: Failed dependencies:
qt4-x11 >= 4.2 is needed by skype-2.1.0.47-fc10.i586
Bump: The skype is running fine by the below link. [URL]. This version needn't those QT libraries again? It's strange. In before I was using the version called "skype-2.1.0.47-fc10.i586.rpm" that also downloaded from SKYPE official website. But it's not working as I mentioned above.
While installing fedora 14 from DVD, during the installing process started half way, the error message appear on the screen " The file ed-1.4-2.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. " I have download the fedora 14 iso twice the same problem i got while installing. I install fedora 10 or 11 it install successfully.
View 7 Replies View RelatedI just installed a TrendNet TEW-649UB wifi dongle, which works when it wants
Anyway, I set up ICS, it didn't work, so I undid what I had done from the tutorial, I also cleared IPTable rules, but now I still get error messages as you can see on the attachments.
I installed Mono on Debian 8 using apt-get. Specifically, I followed these instructions: [URL]..
Then suddenly, my entire machine locked up . . . I gave it a few minutes and then cold booted. It came up to a login prompt but no gnome. sigh. So, I use apt-get to uninstall all of the mono stuff and I also did apt-get clean, apt-get autoclean, apt-get autoremove . . . and rebooted . . . to a login prompt.
So, I installed gnome using apt-get install gnome-core and then after a reboot I got gnome again.
However, every time I log in, I see an "Oops" message flash briefly and then the GUI loads. Everything seems to be ok . . . but I don't like seeing that message; it says something like "something went wrong, please log out . . ."
I kind of dug around /var/logs a little and there are some error messages in kern.log files . . . how I can get my machine back to the state it was in, i.e., not flashing an Oops message when I authenticate?
I downloaded opensuse from opensuse.org(the DVD), and when I tried to install it gave me an error message. When I saw the file on the mirror, it was 4.7 G, but when I burned it, I did notice it was only 4.2 Gs.
I tried another download and again it was only 4.2 Gs, how or where can I obtain a working installable DVD of OpenSuse?
