I start a program from terminal, say gedit. The terminal will be recognized as processing, and I cannot use the same terminal for other tasks until I close the gedit.
So without opening another terminal, how can I use the terminal while processing the program?
I need something about file processing tutorial in terminal, about its commands.
View 2 Replies View Related I'd like to run a program [URL] from the GUI menu (yes, I know I can run it from the command line). I've gotten this to work by using a menu entry (see attached screenshot).The command is:
Code:
gksu chkrootkit
with the option for Type: was selected as Application in Terminal However, when chkrootkit is finished, the terminal immediately snaps shut according to the profile selection: When Commands Exits: Close terminal What I'd like to do is create another profile that causes the terminal to be held open (see screenshot) when the command exits and be able to choose that profile from the GUI Menu entry. I believe the command when using the CLI is:
Code:
gnome-terminal --profile=<profile_name>
how do I incorporate this within the Command entry line of the launcher?
i started using computer when it was all dos driven so thought i was going to be fine using the terminal in ubuntu the problem i am facing is i can not quite get my head round why is it if i load the terminal. and the first this i type is dir or ls it gives me a list off directories. So why is it if i type cd /pictures i get no such file or directory ? Confused
This also bugging the jebus out off me is i am trying to get into my usb pen drive from the terminal to run a program i have on there.
so i type cd /media
then typed ls
is displayed New Volume <-- This being the name off my pen drive
i have tried every this to get into there but the commands i would use in dos are not playing ball.
Can some one please explain how to get into my usb pen then tell me were i can go read on this as i really can not get my head around this at moment.
I am just started using Ubuntu yesterday and I have been trying to install a program (Vim). I was following a tutorial and got to the following step:
- sudo dpkg -i vim73_20101114-1_amd64.deb
When run this command... I get the following message: Processing triggers for man-db ... Nothing happens after this and the regular terminal command line appears once again.
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies View Relatedi have a seemingly simple desire but i cant get it right. my .xinitrc is as follows
openbox
sleep 5
xfce4-panel
since that only starts openbox
i would like to know how to get it to also start the xfce panel
also how can i run say firefox from a term and be able to close that term window without killig FF?
Is there any way to run commands of other programs from the terminal?opened a doc file from the terminal using>openoffice.org filename.docis there any way to executeSELECT ALL[ctrl + a] orCOPY [ctrl + c]from the terminal?
View 2 Replies View Relatedi should know this but just to be sure, to update bluefish the html editor, do I do:sudo apt-get update bluefish
View 4 Replies View RelatedI am running a program on a "supercomputer" in my department via ssh.The program is currently giving a progress output to my terminal. I want to close my terminal, and log off, without stopping the program on the remote computer. I have tried typing & and pressing enter but that didn't do anything.I'm tempted to just close the terminal, but the program has been running for 2 days (I gave it a lot of data to crunch) and I don't want to lose these last 2 days of work.
View 4 Replies View RelatedWhat command can I use to start a program in the terminal? What command is appropriate for applying patches to that or other programs? What command is appropriate to applying a 3.5 version patch to the 3.0 version of firefox. What are some useful commands for the terminal?
View 9 Replies View RelatedI want to create a shortcut to run a program called RoomEqWizard but the only way I know how to run the program is to open a terminal and type the location to where the program is and call the program file. I already tried creating a shortcut on the main menu but I get a "error creating the child process for this terminal" message every time...
View 1 Replies View RelatedI am wanting to try creating a simple program through Terminal. Anything will do. A window or button, etc. I haven't found anything simple enough online yet, but I'm sure they're out there. I just want to expand my knowledge of gtk type stuff. Sorry if this is not the correct category to ask this. I was going to put this on the Community Cafe forum, but chose General Help instead. I am running Ubuntu Lucid. **Edit note: I did try the procedure described at the url (below), but I got all kinds of errors in terminal. [URL]
View 1 Replies View RelatedI downloaded Blender2.59 and it comes as an executable and some lib files etc. I want to move them to their appropriate folders Since I want want to have to run the program from the terminal.
blender to usr/bin
libs to usr/lib
but I don't know how blender will know how to find the lib files if I move them around like that.
Also I can't seem to change the file icon and put it into Applications > Graphics.
I just downloaded with a terminal the program ClamAV. But where it is located? I don't see it in Application - accessories -etc ? neither in "Places", etc where it is? ps: the place where I found about this was here:[URL]...
View 4 Replies View RelatedMy terminal program comes up as a white screen (see Screen shot picture)and so does the login screen (Like when you run updates and it asks you to log in so you can update, YES that screen) I have searched and found nothing on this
I have a Dell Optiplex GX115
Dell LED flat screen 49T monitor
Ubuntu 9.10
512mb ram
80gb hard drive
I want to start a program which starts from terminal window and needs sudo permission. How can I start it from Application menu without need of any permission?
View 2 Replies View RelatedIt really bothers me that when I start a program through the terminal it takes up space with the terminal that's tied up with the program, and the program itself. I know how to keep it from tying up the terminal, but when it devotes the terminal, I like that it gives output if the program crashes. Is there a way I can set a terminal to completely hide itself (off the desktop and the taskbar) while it's running a program, then reappear once the program is closed?
View 4 Replies View RelatedI use Rapidshare a lot to download files and wanted a simple terminal command or program that would shutdown my monitor so I don't have to manually do it.
View 9 Replies View RelatedIm trying to install a program with bitrock installer but im asked to logon as root or become super user. When trying to logon as root from logon window I get message that "cant authenticate user" Ive tried to find a place in "users and groups" to become superuser but cant find it.
View 9 Replies View Relatedadd/remove option in the graphics mode is not working......its showing cant retrieve software information how can i remove a software from the terminal
View 7 Replies View RelatedI have a C program that can run disconnected ( like most ), is there a programmatical way to tel if the program is running without a terminal? Example:nohup my-program &What I want is to modify the program so it can be used as a HUB interface. It does Peer to Peer communication and I want to make it a server function with a command line option.Currently if I disconnect the program, it will loop on the read for stdin, I need to be able to detect that and go into 'HUB' mode.
View 4 Replies View RelatedI want to design c program can run terminal command and put the output of command into file... How can i do this ? for example :
string s = " iwlist scan "
and when i run the programm this command applied and put the output into specific file
I run a program by executing this command in a terminal screen.Code:coco@coco-desktop:~/Escritorio/MO_1.10/MagnumOpus$ java -jar MagnumOpus.jarSince it is a bit tedious, I tried to create a launcher. I copied the above code into the Command box. The launcher is created, but fails to run the program. Instead I get an error message.
View 6 Replies View RelatedAtleast I think it's a terminal program. I remember several years ago while using Redhat 7 when working in the terminal it would automatically complete the pathnames and filenames for you. If I was typing in the terminal "cd downloads" but I only typed "cd do" it would automatically complete my command with "cd documents" but if I continued to type "cd dow" it would know that I don't mean the documents folder and it would know the only other folder path with a dow in it is downloads. I'm not sure if my description is 100% accurate but I think you get the idea. Ubuntu doesn't seem to have this by default and I'm curious if I can get it. Is it a terminal program/client I need to use, or just an option? I don't know what it's called so I've had a hard time googling for it!
View 9 Replies View RelatedUsually I open 5 terminals. And since each of those 5 terminals prints it's tile as: "username@username-laptop: ~" It becomes very hard to see what is what. So, I would like my terminal to always change it's title automatically to the program that I am currently using.
So, if I type "irssi", the title of my gnome-terminal-window, should change to: "irssi" for example.
Anyone know how to launch a program from CLI (command line) to a specific viewport? I start programs all the time from the CLI and there are times when I'm in "typing demon" mode and don't want to touch the mouse. Being able to launch a program to a certain viewport (Compiz, w. effects) would be really helpful at times.
I'm familiar with wmctrl and i can use the -a and -c options to switch to and close windows fine. I only have 1 desktop (9 viewports, though), and wmctrl's support for viewport seems limited at best. Ideally, I'd like to launch a program to a specific viewport, but just being able to move an existing one to a specific viewport would work, too.
Please note: I'm talking about moving apps to viewports AD HOC or DYNAMICALLY, not in a fixed way like I believe devilspie and such (and Compiz' Place plugin). Depending on my task, I need to quickly launch several apps to different viewports, and this VARIES for me a lot. ubuntu 10.04 lts / gnome / compiz w. full effects
vlock works, however it requires that I return to the shell to run it. Is there a way to assign a key combination to run vlock, so the current program doesn't have to be ended?
View 3 Replies View RelatedIs there a terminal program that shows what you pressed on the keyboard?There are these two keys to the right and left of the up arrow key that are "PageBack" and "PageForward" for Firefox, but Midori can't use these keys like that, in fact, I don't think it even knows they exist. Wondering if I can get their name or something.
View 2 Replies View RelatedIs there a diary program for Linux that runs in the terminal?
View 1 Replies View Related