Trying to load ubuntu 11.04 and error message comes up cannot find autorun program. how do i get the program on my computer so i can download the upgraded version of ubuntu I have tried rebooting and many many other things. it loaded just fine on my desktop right over my pc linux os.
View 1 RepliesI just installed Ubuntu on my brand new system that I built. I put in my cd for my HD 5770 video card, and an icon shows up on my screen XFX_VGA_V9.8C text under it.
However when I try to access it in anyway, I try to open with autorun prompt, I get a message "This medium contains software intended to be automatically started. would you like to run it?"
I click on run and get "Error autorunning software, cannot find the autorun program."
Is there anyway that I can run this disk. It's important for setup. I cant copy the disk to the desktop, I get errors.
when i try loading my printer software or home hub software i get a message saying "ERROR AUTORUN NOT FOUND" How do i sort it
View 3 Replies View RelatedIv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedWith what functions i can write my program in /etc/init.d with c++ to start every time the computer starts ? (like in windows with RegOpenKey,RegSetValueEx..............) ?
View 4 Replies View RelatedNow Debian6 suspend and rstart is all ok!
Auto start a program with login is ok.
How to auto start a program with debian suspended and restart ?
Maybe with gdm3 or NIC....?
How can I catch a event to auto start my program?
I'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedI have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?
View 3 Replies View RelatedI was wondering whether there is an inbuilt logging system in UNIX?
I ran and installation and the program opened up automatically but I can't find the program executable.
If I could find a log then I could locate this file.
i cant connect with 3g modem.I've tried with vodafone and 3 ireland.THE SOFTWARE ICON IS ON SCREEN WITH BOTH MODEMS but when i try to run they cant find autorun files is there a comand to run these files their in media/3connect/autorun.exe.do i need permissions or something
View 8 Replies View RelatedI am trying to run a .NET program with mono. I got the following:
Code:
Parser Error Message: Assembly ActiveReports.HtmlExport, Version=3.3.0.1999, Culture=neutral, PublicKeyToken=cc4967777c49a3ff not found
This means it requires ActiveReports, but could not find any Linux version of that software. So, is there any Linux alternative for it?
My system is Debian/sid (unstable).
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Replies View RelatedI have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
We are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
I'm installing Sun Virtualbox and get the following error message. The install does not stop or crash, but just don't know what to do about this message:
Code:
An error occurred while loading or saving configuration information for frontend. Some of your configuration settings may not work properly.
[code]....
I have been using my desktop as a dual boot machine for several months now. The primary hard drive with windows on it died, and since we have been using ubunto 9.10 exclusively, I just removed the dead drive, changed the jumpers on the secondary drive to primary and did a clean install on the drive which presumably formats the disk before installing. When I try to boot from the hard drive i get the following message:
ERROR: no such device 2eb48bcb-7bb4-4080-b04d-fc32dec8c252
I tried many times to install Ubuntu 10.04 but I keep getting the following error message:
Can't be the CD or the CD drive because I get the same thing with a bootable USB flash drive.
HDD in SATA 1 port
DVD burner on SATA 0 port
HDD formated
Vice versa does not work neither.
Mobo: Intel D945GNT
I just installed Ubuntu 10.10 but while completing installation at the point when we remove installation CD from drive and go to press enter to restart the system, I saw this error:[2993.693601] end_request: I/O error, dev sr0, sector 537844 like this line there were so many line displayed the I pressed enter the PC got restarted and now Ubuntu running as nothing happened. But I couldn't understand what was that error and how much serious it was.
View 2 Replies View RelatedI am just now starting to go deeper than the surface of my computer so I am very much a beginner. I have downloaded Ubuntu 10.10 and have tried to install it by mounting the image and installing "inside windows." Next, upon reboot and selecting Ubuntu from the windows loader it eventually went to a colorful screen but stayed there... the first time I let it sit there for 20 minutes or so then restarted, uninstalled/reinstalled tried again... then I let it sit there for 3 hours, nothing. Next I tried to mount image and install "demo and full installation." This time upon reboot I choose Ubuntu from the windows loader menu and an error message came up. I will type it out below exactly as I see it because this is the same message that came up when a friend suggested I boot from a USB drive.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) unable to find a medium containing a live file system
When I hit the "upgrade" button, the box greys out and I get a message saying "could not download release notes, check your internet connection" (or words to that effect)?
View 1 Replies View RelatedA couple of months ago I bought a new Dell laptop with Windows 7 pre-installed. Rather than strip the hard drive and go with Ubuntu exclusively, I left W7 on and set up Ubuntu 10.04 as a dual boot installation. All was well for a month or more and now suddenly W7 won't boot. The Windows error message I get is The boot selection failed because a required device is inaccessible I've purged and reinstalled Grub2 several times with no luck. Also tried Windows fixmbr which allowed W7 to boot but made Ubuntu inaccessible. Below is the output of the boot_info_script.
[code]....
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
I am helping a friend (remotely) and she has a problem on the laptop which prevents doing any updates. The error message is Could not initialise the package information An unresolvable problem occurred while initialising the package information. Please report this bug for the 'update-manager' package and try to include the following error message:
'E:Encountered a section with no Package: header, E: Problem with MergeList /var/lib/apt/lists/gb.archive.ubuntu.com_ubuntu_dists_jaunty-updates_restricted_binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
[Code]..
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system
Processor: Intel pentium IV
Ram 1 GB
Harddisk:- 160 gb
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
i'v installed ubuntu 10.04 on 3 different desktops and 1 laptop. It has gone flawlessly on all 4. i a want to install it on my hp to dual boot(the others i just wiped the drives) but when i tell it to boot from the cd at first it looks like it might work, with the purple page, but after a few minutes, before i get to the install options i get an error message. my current operating systime is windows and i have an hp pavilion. with 2.5 gigs of ram and a descent graphics card.
View 3 Replies View Related10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
I am trying to install Ubuntu 10.10 and i get this error message after a while of loading:
View 2 Replies View Related