Ubuntu Installation :: Upgraded From 10.04 To 10.10 - Can't Choose The Right Screen Resolution
Dec 9, 2010I just upgraded from 10.04 to 10.10. However, the screen resolution is changed and the I can't choose the right resolution.
View 9 Replies
ADVERTISEMENT
Ubuntu :: Screen Resolution - Only Choose 800x600 ?
Mar 3, 2011I have a good Asus monitor in which I can have a resolution of 1280x800 when using Mac Os (I have a Power Mac G4). However, when I try to have a better resolution with Ubuntu, the only resolution that it lets me choose is 800x600! There are no choices. I tried the "detect display" button but it doesn't change anything.
View 8 Replies View RelatedUbuntu :: Karmic Choose Screen Resolution Feature?
Jun 21, 2010One thing I loved when I checked out the live cd of Lucid was the fact it had a nice drop down list with lots of screen resolutions to choose from, does Karmic have that same feature?
View 2 Replies View RelatedUbuntu Installation :: Cannot Get To The Screen That Allows To Choose An Operating System
Dec 2, 2010I recently upgraded to the newest version of Ubuntu. I dual boot with Windows 7.
All was going fine the first few times I used my system after the upgrade but I have now run into a serious problem. I'm not that technical so will explain this as best i can.
Basically, when I switch my computer on, I can not get to the screen that allows me to choose an operating system. Before it gets there it just restarts.
I guess its a problem with the GNU GRUB software. It just seems like the computer can't find it and restarts itself. So I can't get into either Ubuntu or Windows at the moment.
Ubuntu Installation :: Upgraded To 9.10 And Now At A Dead Screen?
Jan 12, 2010I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
Ubuntu Installation :: Screen Freezes When Upgraded To 9.10?
Feb 2, 2010I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies View RelatedUbuntu Installation :: Upgraded To 9.10 - Only See A Black Screen?
Feb 5, 2010So I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev
[code]....
Ubuntu :: Cannot Choose The 'Resolution' & 'Refresh Rate' Within 10.10
Feb 22, 2011Iam facing difficulty with smaller text size in the latest release 10.10(owing to default Screen Resolution of 1440X900{16:10}).
Surprisingly, Iam not able to choose any other 'Resolution' & 'Refresh Rate'from the corresponding drop-down menus!?(Click on the drop-downs do not provoke any action!?)
Default 'Refresh Rate' is also set to 0Hz.'Rotation' as well is fixed to NORMAL only?
Ubuntu Installation :: Screen Freeze And Different Colors After Upgraded To 11.04
Apr 28, 2011I have just upgrade from 10.04.to 11.04 When I restarted after upgrade installation I got message that I didn't have the hardware to run Unity, then I clicked on ok, now ununtu start, but it is very slow to start and the screen freeze and has different color, but after while it start. I am looking for advice to solve this problem.
View 5 Replies View RelatedUbuntu Installation :: Upgraded To 11.04 Blank Purple Screen?
May 7, 2011I upgraded from 10.10 to 11.04 and now I have a blank purple screen. I have searched and went through some of the steps members have been giving, but haven't been able to fix the problem. I can get into the computer going through the grub menu, but when I restart I go through the same problem.
Here is the computer that I have: [URL]
Ubuntu Installation :: Upgraded To Maverick Meerkat, Getting Black Screen?
Nov 10, 2010I upgraded my laptop from Ubuntu 10.04 to 10.10 (Maverick Meerkat). Upon rebooting after the upgrade I get a black screen. No login window, nothing. Just a black, empty void on my screen.My laptop has a Nvidia graphics card, and reading around on the internet I heard that there is a problem with Meerkat and Nvidia cards, something to do with the driver or some such thing.Is there a way to fix this?I'm wondering if it's possible to boot Ubuntu into a command line interface instead of X Windows, log in, and change the driver settings in xorg.conf? How would I go about booting into the command line? Is there a sequence of keys to press at boot time?
View 2 Replies View RelatedCentOS 5 Hardware :: New Monitor; Can't Choose New Resolution?
Dec 5, 2010I recently purchased the HP w2338h LCD monitor; I previously used HP w1907, which worked perfectly. My graphics card is NVIDIA Quadro NVS 290.
01:00.0 "VGA compatible controller" "nVidia Corporation" "G86 [Quadro NVS 290]" -ra1 "nVidia Corporation" "Unknown device 0492"
01:00.0 0300: 10de:042f (rev a1)
Debian Installation :: Grub Bootloader Only Show Kali Linux To Choose From - Screen Not Allowing To Boot From CD
Nov 29, 2014Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
Ubuntu Installation :: Screen Resolution Out Of Range?
Jun 5, 2010I upgraded to ubuntu 10.4 and now my screen says out of range. I can hear my normal login noises. sounds like I am working blind. after I log in I cannot do anything without knowing whats going on. I tried ctrl-alt + to try to change screen resolution but I cant tell if it pops up. nothing new happens. I cant slave my hard drive to my other windows or linux OS or linux Live CD, it tells me I dont have permission to open files so I can rescue my files. DO I have to buy a new graphics card or new monitor?
View 1 Replies View RelatedUbuntu Installation :: Screen Resolution Low After Upgrade From 10.10 To 11.04
May 16, 2011I have upgraded my machine from Ubuntu 10.10 to 11.04, initially it worked fine, and then I had to replace my VGA cable - now I wind up with a screen resolution that is too low.
It is possible to change the resolution with xrandr, but is there a way to set this permanently (currently it resets on startup)? Previous versions have altered the xorg.conf file and just added a new resolution setting - but I think these settings have been moved out of xorg.conf. Does anyone have any ideas how to change the screen resolution settings permanaently in 11.04?
Ubuntu Installation :: Screen Resolution On Older Laptop?
Apr 3, 2010I just installed the latest version of Ubuntu on my Toshiba Sattelite A25-207 laptop. I totally erased my previous Windows XP OS and everything else. Everything is great, execept the screen resolution. The resolution is set at 800 x 600 and I know that my screen can handle bigger. How do I change this?
I am totally new to Ubuntu and I have no idea how to play with code.
Ubuntu Installation :: Karmic To Lucid : Screen Resolution
Apr 29, 2010On the 28th of April I upgraded my system (laptop with "SIS Mirage 3 Graphics" video card) from Karmic to Lucid and my screen resolution was reduced from 1024*768 to 800*600. I tried during one day to find the suitable driver but no luck on SIS web page.
I eventually found it on the followwing address : [URL]
It works very well and the resolution has jumped now to 1280*800. The only remaining and identified problem is with grub2 : my system is dual-boot (Windows XP and Ubuntu) and the "recovery" mode does not work anymore for ubuntu, I will maybe have to wait for a next update.
Ubuntu Installation :: Initialization Screen Appearing In Low Resolution
May 2, 2010I did a dist-upgrade from Karmic to Lucid. Everything *seems* to be running OK, but there's one thing that's really nerve wrecking: When I boot my computer, the "Loading" screen - before the splash screen where everything is initialized shows up - appears on an absurdly low resolution (not sure exactly which). So the graphics are awful, the text is too big and so on.
Aside from that, before the Loading screen shows up - right after "GRUB is loading" - a lot of characters (like plus signs) fill two lines of the screen. I think this might also be because of the resolution. So bottom line is:
1) Is there a way to fix this?
2) Should I be concerned enough to go with a full fresh install?
Ubuntu Installation :: Reduced Screen Resolution After Upgrade?
Oct 12, 2010I have a 1920x1200 monitor that was displaying correctly under 10.4, and after the upgrade to 10.10 it is displaying at 1280 x 720 (the highest resolution it has), and does not list 1920x1200How can I ask 10.10 to display at 1920x1200?
View 8 Replies View RelatedUbuntu :: Login Screen Won't Let Choose User?
Jun 8, 2011I have recently re-installed Ubuntu 10.10 on my laptop and have encountered an unusual error. It boots up fine, but when I get to the login screen, it just shows the Ubuntu logo, and underneath my computer name with no options for choosing which user to login as. I have tried going into recovery, but it just stops loading.
If needed I can try to upload an image of what the window looks like
Ubuntu Installation :: Display Screen Resolution Settings (Cannot Set To 1200 X 800)
May 4, 2010I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
Ubuntu :: Boot Screen Low Resolution After NVIDIA Driver Installation?
May 29, 2010I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies View RelatedUbuntu Installation :: Sun Ultra10 Screen Resolution Un-viewable After Booting?
Oct 10, 2010I have a Sparc Ultra10, which uses PC hardware. I see the Openboot console display at 1024x768, but when I try to boot from a Ubuntu server install CD for Sparc (for example, 7.04) the screen resolution immediately goes out of range for my monitor (according to a warning message flying around the screen).
I tried adding boot parameters to specify the resolution I want (boot: linux vga=773 screen=1024x76, but they seem to be ignored. I guess the Ubuntu testers all have Sun monitors!
I also tried the 8.04 and 9.10 versions, but they respectively hang after the "S" in Silo and issue the fatal error "Fast Data Access MMU Miss".
I've got Silo version 1.4.14, OBP 3.31.0, and POST 3.1.0. My computer is an UltraSparc IIi at 360 Mhz, with 256 megs of memory.
So, short of acquiring a monitor with the really strange Sun standard resolution, how can I get past this problem and get the resolution I want from Linux at boot time?
Ubuntu Installation :: Install Almost Worked But Screen Resolution Too High?
Dec 6, 2010The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536.
default connected 2048x1536+0+0 0mm x 0mm
[code]....
Fedora Installation :: Screen Resolution Cannot Be Set To 1024x768
Jan 14, 2009I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
View 4 Replies View RelatedFedora Installation :: Resolution That Screen Can't Read
Jan 31, 2009I m trying to install Fedora 10 on my computer with ATI Radeon HD3850 but when anaconda is loaded i get a very wierd resolution that my screen can't read. Using another screen i got an image but it was unreadable. It was like the frequency was wrong or something.
View 1 Replies View RelatedUbuntu :: Choose Giant X Logo Screen Saver?
Jul 8, 2011Нow can I choose giant X logo screen saver in Ubuntu?
View 6 Replies View RelatedUbuntu Installation :: Trying To Install - Message Saying The Screen Resolution Is Wrong And Need To Reset
Sep 20, 2010on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies View RelatedFedora Installation :: How To Set Console (Tty1) Screen Resolution
Jul 29, 2010After install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.
It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?
General :: Mint 10 Installation - Screen Resolution Is Stuck At 800 X 600(4:3)
Dec 5, 2010I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....