Ubuntu Installation :: Karmic To Lucid : Screen Resolution
Apr 29, 2010
On the 28th of April I upgraded my system (laptop with "SIS Mirage 3 Graphics" video card) from Karmic to Lucid and my screen resolution was reduced from 1024*768 to 800*600. I tried during one day to find the suitable driver but no luck on SIS web page.
I eventually found it on the followwing address : [URL]
It works very well and the resolution has jumped now to 1280*800. The only remaining and identified problem is with grub2 : my system is dual-boot (Windows XP and Ubuntu) and the "recovery" mode does not work anymore for ubuntu, I will maybe have to wait for a next update.
View 3 Replies
ADVERTISEMENT
May 3, 2010
using update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
View 3 Replies
View Related
Oct 18, 2010
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
View 2 Replies
View Related
Jan 21, 2010
I'm trying to track down a screen resolution issue (Karmic on an Acer SK20 [Intel 945 graphics] with Acer AL1511 flat panel via VGA) and mechanism for setting the framebuffer screen resolution after GRUB2 has loaded the kernel but before X starts.
Before I forced it to behave itself by adding an xorg.conf with a lone "Modes" entry for 1024x768, X was setting the panel to 640x350 by default. It appears from looking at get-edid | parse-edid that this is because 640x350 is the only resolution this idiot panel's EDID says it knows about, even though its native resolution is in fact 1024x768.
So the GUI works fine now, but all the text consoles (Ctrl-Alt-F1 through F6) are still operating at 640x350 and look terrible; also, because usplash doesn't know what to do with 640x350, I don't get my nice white Ubuntu logo before GDM starts.
In previous releases, I would have dealt with something like this by adding vga=791 to the kernel boot options. That doesn't work for the Karmic kernel, and GRUB2 whines about it being deprecated and tells me to use "set gfxpayload=1024x768x16,1024x768" on a line before the "linux" command instead.
Things I have already tried, with no success:
1. Adding "set gfxpayload=1024x768x16,1024x768" into the boot sequence, right before the "linux" line, by using GRUB2's inbuilt boot sequence editor (Ctrl-E): no change.
2. Changing the GRUB_GFXMODE= line in /etc/default/grub and running update-grub: changes the resolution used for GRUB's own menu, but as soon as the kernel boots it's back to 640x350 on text consoles.
3. Same as (2) but also adding a "set gfxpayload=keep" line in /etc/grub.d/00_header, right after the "set gfxmode=${GRUB_GFXMODE}" line: same effect as (2).
4. Removing the "splash" option from the "linux" line. No change (I guess this is because usplash didn't work anyway at 640x350). By the way, usplash.conf is set up for 1024x768 and yes, I did remember to dpkg-reconfigure -phigh usplash to rebuild the initramfs after checking this.
where exactly does Karmic set the screen resolution for its text consoles, and how can I force it to ignore this LCD panel's bogus EDID?
View 3 Replies
View Related
Jun 21, 2010
One thing I loved when I checked out the live cd of Lucid was the fact it had a nice drop down list with lots of screen resolutions to choose from, does Karmic have that same feature?
View 2 Replies
View Related
May 15, 2010
My login screen is still the old one from Karmic (brown) after updating to Lucid. How do I update to the new purple look?
View 3 Replies
View Related
Jul 2, 2010
I have Lucid 64 connected to my 27" TV with 4:3 aspect ratio via s-video from an nVidia NV4 GeForce 6200SE TurboCache 256 MB card using the 173 driver set at 800X600. After hours (don't get on my case, this is the first time I've had hardware that would run well on a TV) and hours of tinkering I've gotten a feel for how to do this and have some pretty good results. However, I have two problems.
.01 The display isn't quite filling the entire screen. It's leaving about a .25 inch black bar all the way around the screen. This is negligible and if I can't fix it with only minor adjustments then so be it. I can live with it.
.02 This one isn't so minor. Many of the Windows are opening with portions of themselves cut off of, usually, the bottom of the screen. This makes, among other things, getting to the Close button rather impossible.
View 9 Replies
View Related
Apr 30, 2010
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies
View Related
Jun 15, 2010
I can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando �rbol de dependencias
[code]...
View 3 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
Mar 16, 2010
I just upgraded Ubuntu Karmic to Lucid alpha 3. It works fine except for a few things that can be expected in an alpha version. Anyway, I would like to know if it would be better to upgrade to the final release of Lucid or if I should do a clean install. I don't mind losing my files and settings because there is nothing important on my laptop, but it would be nice not to.
View 4 Replies
View Related
May 3, 2010
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
View 5 Replies
View Related
May 4, 2010
I just had a look on the Virtualbox site and thus far there is no listing for a Lucid specific release.Can I use the Karmic release or is this going to cause problems? I don't want to use the Ubuntu OSE version because I need USB support.
View 8 Replies
View Related
Jun 18, 2010
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
View 9 Replies
View Related
Apr 27, 2010
After doing clean installs of the last two Ubuntu Releases, Jaunty and Karmic, I decided to try an upgrade to Lucid. The upgrade went well and I'm satisfied with it, however I have a question about the repositories.All the sources in /etc/apt/sources.list correctly point to Lucid, but in Software Sources / Other Software I still see references to Karmic. Is this something to be concerned about? Can I (or should I) change them to Lucid?
View 1 Replies
View Related
May 1, 2010
I did receive a few errors during upgrade process, one of which was relating to GRUB.
I currently have 2 internal disks, my primary has OS on it, 80GB, secondary is 500gb, both are ect4 filesystem.
My external is 500 firewire 400 and NTFS.
Contents of my /etc/fstab/
Code:
Not seeing any mount points for my internal and external drives
sudo fdisk -l reveals the following info:
Code:
View 2 Replies
View Related
May 9, 2010
Well the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
View 2 Replies
View Related
May 19, 2010
I just upgraded a Ubuntu Desktop 64bit system from Karmic (9.10) to Lucid (10.04). There were several PostgreSQL 8.3 clusters running on that machine. After the upgrade, postgresql was not able to run anymore.
The package postgresql-8.3 was marked "rc" in dpkg -l I was not able to re-install PostgreSQL 8.3 because of a mismatched dependency. There was no warning. I guess i should have read the release notes, which i didn't. There should have been a warning before it was too late to turn back and upgrade postgresql to 8.4 first. I don't see how this is supposed to work, ever.
I'd like to know if this would be considered a bug, if it is known already and how to correctly file this bug correctly if appropriate (ubuntu-bug ?)
View 3 Replies
View Related
May 30, 2010
if this is covered elsewhere. Could not find it (could be being blind) If I upgrade fro 9.10 to 10.04 LTS will I lose
1. My Gnome panel settings
2. My compiz fusion settings
and
3. Will EnvyNG still be able to manage m,y Nvidia drivers OK?
I realize there is always a risk with an upgrade but I was just wondering what you all thought the chances were that I may lose these settings.
View 3 Replies
View Related
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies
View Related
Mar 22, 2010
This printer is popular and is not included in ubuntu package. [URL]
View 5 Replies
View Related
May 5, 2010
I have an HP Mini 210 and I recently performed an Upgrade from 9.10 to 10.04 and noticed that the netbook is much more noisy now (and can get very warm). I am not sure wether is the fan or the hard drive spinning. I did a "top" but no process was high consuming. I also thought that maybe compiz could be responsable for it, so I disabled all the visual effects, but still no change.
View 5 Replies
View Related
Jul 30, 2010
When Lucid released, I upgrade the Karmic in my Thinkpad R61 using
Code:
One things that remains until today is that when I'm using latest kernel (right now 2.6.32-24), the compiz run very slow, make the whole desktop unusable. When compiz is killed and using metacity, the desktop is running in normal speed.
Fortunately I still had the Karmic kernel (2.6.31-20) and booting using this kernel, everything run normally.
I just wonder what cause the latest kernel make compiz become slow. Is there any leftover application that I had to uninstall (maybe it's like pulseaudio's problem above), or any missing library/application that I need to install?
View 9 Replies
View Related
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
Jul 14, 2010
I did an upgrade on my system yesterday. After the completion of the upgrade on restarting the system the computer enters tty1 mode straight without giving me the GUI login screen making it difficult for me to work. The question does now is what could have caused this to happen ? Have i gottten something wrong somewhere?
To switch to tty7 mode i hit the key crtl+alt+7 but it gives an error message about an unknown user even after login in with my username and password on tty1. Start the computer on recovery mode and selected the option correcting broken packages and it produced a result requiring me to download some new packages. I have a huawei e1550 modem which i use to browse in Nigeria. I want to know how i can connect to the internet on the tty1 after insertion of the modem so i can download the necessary packages it requested on issuing dpkg command
View 1 Replies
View Related
Jun 2, 2010
I have not been able to install a linux distro since 9.04. Karmic and lynx both freeze on install. (screen gets glitchy) I am a total noob when it comes to anything beyond installing.
Opteron 165
DFI lanparty ultra-d
2gb gskill
EVGA 7800gt
View 3 Replies
View Related
Jun 5, 2010
I upgraded to ubuntu 10.4 and now my screen says out of range. I can hear my normal login noises. sounds like I am working blind. after I log in I cannot do anything without knowing whats going on. I tried ctrl-alt + to try to change screen resolution but I cant tell if it pops up. nothing new happens. I cant slave my hard drive to my other windows or linux OS or linux Live CD, it tells me I dont have permission to open files so I can rescue my files. DO I have to buy a new graphics card or new monitor?
View 1 Replies
View Related
May 16, 2011
I have upgraded my machine from Ubuntu 10.10 to 11.04, initially it worked fine, and then I had to replace my VGA cable - now I wind up with a screen resolution that is too low.
It is possible to change the resolution with xrandr, but is there a way to set this permanently (currently it resets on startup)? Previous versions have altered the xorg.conf file and just added a new resolution setting - but I think these settings have been moved out of xorg.conf. Does anyone have any ideas how to change the screen resolution settings permanaently in 11.04?
View 6 Replies
View Related
May 3, 2010
Why can't i get internet with lucid or karmic, but have no network problems on previous verisons of ubuntu?
View 4 Replies
View Related
Jun 9, 2010
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
View 4 Replies
View Related
