Ubuntu Installation :: Sun Ultra10 Screen Resolution Un-viewable After Booting?
Oct 10, 2010
I have a Sparc Ultra10, which uses PC hardware. I see the Openboot console display at 1024x768, but when I try to boot from a Ubuntu server install CD for Sparc (for example, 7.04) the screen resolution immediately goes out of range for my monitor (according to a warning message flying around the screen).
I tried adding boot parameters to specify the resolution I want (boot: linux vga=773 screen=1024x76, but they seem to be ignored. I guess the Ubuntu testers all have Sun monitors!
I also tried the 8.04 and 9.10 versions, but they respectively hang after the "S" in Silo and issue the fatal error "Fast Data Access MMU Miss".
I've got Silo version 1.4.14, OBP 3.31.0, and POST 3.1.0. My computer is an UltraSparc IIi at 360 Mhz, with 256 megs of memory.
So, short of acquiring a monitor with the really strange Sun standard resolution, how can I get past this problem and get the resolution I want from Linux at boot time?
View 3 Replies
ADVERTISEMENT
Apr 24, 2011
When I boot without X or hit Ctrl+Alt+F1 I have very low screen resolution.(large font) I believe default is 640x480
Normal for the screen is 1920x1200.
Can I change it?
Does it have to do with Nvidia?
Ubuntu10.10-x64-Nvidia
View 3 Replies
View Related
Jul 21, 2010
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
View 2 Replies
View Related
Jun 5, 2010
I upgraded to ubuntu 10.4 and now my screen says out of range. I can hear my normal login noises. sounds like I am working blind. after I log in I cannot do anything without knowing whats going on. I tried ctrl-alt + to try to change screen resolution but I cant tell if it pops up. nothing new happens. I cant slave my hard drive to my other windows or linux OS or linux Live CD, it tells me I dont have permission to open files so I can rescue my files. DO I have to buy a new graphics card or new monitor?
View 1 Replies
View Related
May 16, 2011
I have upgraded my machine from Ubuntu 10.10 to 11.04, initially it worked fine, and then I had to replace my VGA cable - now I wind up with a screen resolution that is too low.
It is possible to change the resolution with xrandr, but is there a way to set this permanently (currently it resets on startup)? Previous versions have altered the xorg.conf file and just added a new resolution setting - but I think these settings have been moved out of xorg.conf. Does anyone have any ideas how to change the screen resolution settings permanaently in 11.04?
View 6 Replies
View Related
Apr 3, 2010
I just installed the latest version of Ubuntu on my Toshiba Sattelite A25-207 laptop. I totally erased my previous Windows XP OS and everything else. Everything is great, execept the screen resolution. The resolution is set at 800 x 600 and I know that my screen can handle bigger. How do I change this?
I am totally new to Ubuntu and I have no idea how to play with code.
View 3 Replies
View Related
Apr 29, 2010
On the 28th of April I upgraded my system (laptop with "SIS Mirage 3 Graphics" video card) from Karmic to Lucid and my screen resolution was reduced from 1024*768 to 800*600. I tried during one day to find the suitable driver but no luck on SIS web page.
I eventually found it on the followwing address : [URL]
It works very well and the resolution has jumped now to 1280*800. The only remaining and identified problem is with grub2 : my system is dual-boot (Windows XP and Ubuntu) and the "recovery" mode does not work anymore for ubuntu, I will maybe have to wait for a next update.
View 3 Replies
View Related
May 2, 2010
I did a dist-upgrade from Karmic to Lucid. Everything *seems* to be running OK, but there's one thing that's really nerve wrecking: When I boot my computer, the "Loading" screen - before the splash screen where everything is initialized shows up - appears on an absurdly low resolution (not sure exactly which). So the graphics are awful, the text is too big and so on.
Aside from that, before the Loading screen shows up - right after "GRUB is loading" - a lot of characters (like plus signs) fill two lines of the screen. I think this might also be because of the resolution. So bottom line is:
1) Is there a way to fix this?
2) Should I be concerned enough to go with a full fresh install?
View 5 Replies
View Related
Oct 12, 2010
I have a 1920x1200 monitor that was displaying correctly under 10.4, and after the upgrade to 10.10 it is displaying at 1280 x 720 (the highest resolution it has), and does not list 1920x1200How can I ask 10.10 to display at 1920x1200?
View 8 Replies
View Related
Dec 9, 2010
I just upgraded from 10.04 to 10.10. However, the screen resolution is changed and the I can't choose the right resolution.
View 9 Replies
View Related
Nov 8, 2010
I have been trying to install Ubuntu 10.10 64bit on my Windows7 64bit machine. I created the Ubuntu installation on a USB stick and when I run it live from the stick, it works fine. Under Windows7, I created a partition for Ubuntu, and after reboot run the installation off the USB stick. During installation, I pointed the installer to the partition I just created, and told it to use it as "/" (root - this is the part where I think I could have screwed up, but I am not sure). I want to have both Win7 and Ubuntu on that machine. I did not create the SWAP file as I don't think I'd need it (this is a 8Gb RAM 3Ghz i7 machine). The installation goes without any problem, but then I reboot...
When I restart after installation, and any time after that, I get to the grub screen that allows me to pick the system I want - and when I chose Win7, everything's fine. When I want to pick Ubuntu, or Ubuntu in recovery mode, the screen goes black, and after a short while it seems the monitor itself stops receiving any input from the computer, as it goes into standby. There is no error message, no restart of the computer, no message after I select Ubuntu and click enter. Nothing, just total blackness and despair, and a monitor in standby mode.
View 9 Replies
View Related
May 4, 2010
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
View 2 Replies
View Related
May 29, 2010
I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies
View Related
Dec 6, 2010
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536.
default connected 2048x1536+0+0 0mm x 0mm
[code]....
View 9 Replies
View Related
Jan 14, 2009
I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
View 4 Replies
View Related
Jan 31, 2009
I m trying to install Fedora 10 on my computer with ATI Radeon HD3850 but when anaconda is loaded i get a very wierd resolution that my screen can't read. Using another screen i got an image but it was unreadable. It was like the frequency was wrong or something.
View 1 Replies
View Related
May 2, 2010
I have a Asus A8N-E motherboard with AMD64 processor and NVidia 6600 GT graphics card.I downloaded the AMD64 version of 10.04 (the boot+live cd) and tried booting with it. After looking at the screen showing Ubuntu loading with 5 dots moving forward for about 5minutes, the screen went blank (not completely blank as power-off but a very dark grey color). I waited for about 10-15 minutes in this state but nothing happened.During this whole 10-15 min period the disk usage on the machine was high.Eventually, I just turned off the machine and booted into windows (which was already present on my machine) successfully.Is that blank screen for such a long duration a normal step during installation or was a different process expected?
View 1 Replies
View Related
Sep 20, 2010
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies
View Related
Jul 29, 2010
After install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.
It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?
View 5 Replies
View Related
Dec 5, 2010
I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....
View 10 Replies
View Related
Mar 5, 2010
I cant seem to install Ubuntu 9.10 at all. At 15% I get the following Error Message Input/output Error During Read On/dev/sda then I get the creation of swapspace in partition #5 of SCSI1(0,0,0) (SDA) Failed. Ive tried 6 times already. Im getting no sound at all. How can I change the screen resolution. 800 x 600 is the highest it will go. Im getting really discouraged with Ubuntu. Alot of people seem to have the same problems I am having but there is no solutions. I've checked the MEMTEST and passed, done a disk check and passed.
View 9 Replies
View Related
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Jan 17, 2010
But when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
View 3 Replies
View Related
Apr 30, 2010
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
View 9 Replies
View Related
Nov 7, 2010
I am trying to run Ubuntu from a live USB, everything seems to be great until I get to the part where the GUI should come up. Then I get this screen. It's a little hard to see, but it's basically a white bar at the top and black underneath. The black is flickering a lot and the flickering can stay for a short while (30-120 seconds) even after I have rebooted into windows. Sometimes the bar at the top is another solid color (purple,blue, orange, usually white though), I think it is putting my monitor in a strange version of it's self test.
When it is unplugged the monitor while cycle through full screens of different colors. I have tried Ubuntu 10.10 Desktop AMD64, 10.10 i386, and the latest Fedora to see if another distro had different results. I have also tried 2 other USB drives. I am using Universal USB Installer 1.8.0.8 to make the drives. My own searches have found some problems with graphic drivers for the GeForce 8800 GTX, but they a bit dated. I have tried adding vga=vesa to the boot arguments, I am not sure if I did it right or not, but it resulted in a black screen with a blinking line instead and no flickering.
System specs:
AMD Phenom II 740BE (unlocked to Quad Core @ 3.4Ghz)
ASRock Extreme3 870
WD Caviar Black 640GB 7200RPM 6.0Gb/s
GSkill 4GB PC1600
GeForce 8800 GTX
Dell 3007WFP
View 1 Replies
View Related
Jan 19, 2011
When I start my system on the Ubuntu 10.10 CDROM I get a tiny icon at the bottom, then the screen shuts off due to no signal. So I cannot run the Live CDROM. Relevant here is that Debian CDROM runs just fine. (Lenny installs and runs good, but squeeze does not) Linux Mint (based on Ubuntu) gets me a pretty graphical welcome screen, then the monitor shuts off just like Ubuntu and Kubuntu.WinXP installed and runs without a hitch.
My system: Gigabyte GA-P43-ES3G with 4Gb ram, 750 Gb SATA HDD, Nvidia Quadro video card.I have gone through the BIOS settings looking for clues:SATA AHCI mode is set to IDE (versus AHCI)SATA port 0-3 native mode set to enabled (versus disabled which would be legacy IDE mode)Azalia codec set to auto (verus disabled)
View 6 Replies
View Related
Jan 24, 2011
I have ubuntu CD. When I try to install it inside the window through wubi installer. I choose install inside the window. After installing when computer reboots. I got two option. When I choose ubuntu for boot. After 5-6 seconds a black screen appears like command and installation stopped here. {This screen is full of lines, somthing like...Kvasprintf..//.... acpi,,??//. It says lots of about ACPI. What should I do. When I boot through ubuntu cd, same problem arrives. I am new to ubuntu.}
View 1 Replies
View Related
Feb 21, 2011
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
How do I get the correct setting to stick?
View 7 Replies
View Related
May 27, 2011
downloaded Fedora 15 Live CD and made a booting live CD with it , everything went Okbut after the first screen " automaticlly boot after 10 s " everything just went creepy and the contrast of my screen has become very very low , I was able to see that unity booted but I barely could see the icons without being able to see anything esle , just dark*darkthe same happened with the usb live version .Im having a " Mageia RC " installed in dual-boot with windows 7 and I have the same problem with it . which means, the distro is there but cannot be used cuz the contrast is very very low
View 1 Replies
View Related
Apr 30, 2010
I have fedora 12 and I tried to change the screen resolution under the system menu to a higher one and it changed but now I dont have any menus and I'm not sure if I can use quick keys to go back to the display preferences to reset the screen resolution. Is there anyway I could run the display preferences by running a command in the bash shell or is there a quick key that allows menu access.
View 3 Replies
View Related
