I have just upgrade from 10.04.to 11.04 When I restarted after upgrade installation I got message that I didn't have the hardware to run Unity, then I clicked on ok, now ununtu start, but it is very slow to start and the screen freeze and has different color, but after while it start. I am looking for advice to solve this problem.
View 5 Repliesi am having quite a problem after upgrading my karmic to an 2.6.33 kernel and trying to do an nfs transfer.
the nfs transfer bugs out in (and then freezes the box totally up, so that only pressing the reboot button on the pc itself helps anymore):
Code:
Feb 26 22:31:24 localhost kernel: [ 3964.123290] INFO: task rdesktop:10331 blocked for more than 120 seconds.
Feb 26 22:31:24 localhost kernel: [ 3964.123292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Code].....
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies View RelatedSo I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev
[code]....
I just upgraded from 10.04 to 10.10. However, the screen resolution is changed and the I can't choose the right resolution.
View 9 Replies View RelatedI upgraded from 10.10 to 11.04 and now I have a blank purple screen. I have searched and went through some of the steps members have been giving, but haven't been able to fix the problem. I can get into the computer going through the grub menu, but when I restart I go through the same problem.
Here is the computer that I have: [URL]
I upgraded my laptop from Ubuntu 10.04 to 10.10 (Maverick Meerkat). Upon rebooting after the upgrade I get a black screen. No login window, nothing. Just a black, empty void on my screen.My laptop has a Nvidia graphics card, and reading around on the internet I heard that there is a problem with Meerkat and Nvidia cards, something to do with the driver or some such thing.Is there a way to fix this?I'm wondering if it's possible to boot Ubuntu into a command line interface instead of X Windows, log in, and change the driver settings in xorg.conf? How would I go about booting into the command line? Is there a sequence of keys to press at boot time?
View 2 Replies View RelatedI have a dual boot configuration (WinXp and Ubuntu 9.10) on a PC (my video card is an ATI Radeon 4850), i have been configuring ubuntu for the past 5 days and everything was working fine. Today i installed Screenlets (through synaptic manager), and i was adding a screenlet when the screen froze. I could move the cursor, but couldn't click anything. I left it for about 5 minutes to see if anything changes, and since it was still frozen, i did a hard reset (restart from the button).
In the grub menu i chose the normal linux boot (not the recovery mode), it loads up the welcome splash screen (with the tribal sound and the bar moving), and then the little circle cursor appears, turns into the normal arrow cursor and it hangs. I can move the cursor, but the screen is stuck with the ubuntu splash screen.I restarted (again from the button) and went into recovery mode, but in the recovery console i can't select any option from the keyboard (i tried hitting the cursor keys, enter, nothing happens). I hit ctrl+alt+delete and it restarted the system (so the keyborad does function). In XP i found a recommendation to restart the Xserver, so i rebooted in the Ubuntu splash screen, hit ctrl+alt+F2, logged in, typed the command i found:
sudo dpkg-reconfigure -phigh xserver-xorgrestarted (sudo reboot), and got to the splash screen, which after playing the tribal sounds, turned semi-transparent (i could see the desktop wallpaper, taskbars and a black rectangle where my cairo-dock should appear), but again it freezed, no cursor. I hit ctrl+alt+F2 to go into console mode, and uninstalled screenlets (since it was the last thing i installed before the initial freeze).Screenlets uninstalled properly (i used sudo apt-get remove screenlets) so i rebooted, but it still freezes at the ubuntu screen splash (this time it wasn't transparent, just the standard screen splash). So i tried getting into console mode again, but this time my screen displays lines in a lot of colors, randomly (probably a failure from the video adapter)
I have failed to install kUbuntu for a several days already, so I am currently on SuSE (hate it, love ubuntu...). I don't know what is wrong with my PC, but something ain't right. I tried:1st: Installing kUbuntu x64 - Result: Freeze on loading screen (I think..don't even remember anymore ).2nd: Running Live CD ("Try Kubuntu") - Freeze on splash screen, at the Hard Disc icon (can't get past that one).3rd: Installing Ubuntu x64 with Unetbootin - (GNOME variant). - I get a nice graphic card error, can't unerstand anything - screen messed up.4th: Installing Ubuntu x86 with Unetbootin (GNOME) - same as 3rd time.5th: Decided that maybe something was wrong with the download. Downloaded kUbuntu via torrent. Installed with Unetbootin in a flash - no change.6th: Installed SuSE7th: Downloaded kUbuntu x86, burnt, tried installing, back to 1st step.Is this an infinite loop ?Hardware specs:
250GB x 2 Seagate Barracuda ( I had them connected in a RAID0 via bios previously(Windows 7), had trouble installing suse because of this, but I deleted RAID information and disabled raid in BIOS setup )GeForce 9800 GX2Quad 2 Core 2.664 GB unbuffered ram ( 4 x 1 GB)
so I updated to a new build (I don't know if that is actuaaly what its called), and now my comp freezes everytime after I put in my password to load the system. from the grub menu i can load the previous build and it starts up just fine. Any thoughts why/how to fix it. by build i mean its the same ubuntu version 10.10, but the grub menu has 3 different builds for my system
View 3 Replies View RelatedLittle background info: I have a computer where the hdd crashed. Bought a new hdd tonight and installed it. As the computer had no operating system at this point I put in a copy of the live cd and begin to install Ubuntu 9.10(32 bit)...everything went smooth with the install (at least I think). My problem is that when I get to the login screen, I click on my user name to type in my password but as soon as I click on either my user name or guest it basically freezes...Mouse still moves but can't do anything with login or the options on the bottom right of the screen...
Right when it freezes the pixels under the login box mess up, looks like some type of graphics problem?? I'm not sure, but I can't be the first person with this problem Also after it "freezes" I can't utilize the ctl+alt+f1 command either
I recently received a HP Pavilion dv9000 that the previous owner swore had some issues with it. I'm not so sure it had issues, but that's another story. Anyways, I downloaded Unbuntu 10.10 and burned it to a disk. The first time I booted up the machine I told it I wanted to try Ubuntu. I then left the machine and came back in 20min or so and it looked like it had successfully booted. However I quickly realized the screen was frozen. So I turned off the machine and decided I'd try again a few days later. Today I booted up the machine and I get to a black screen with Ubuntu on it with five dots below the wording. It freezes on this screen. I've rebooted several times but I keep getting to the same screen before it freezes.
View 1 Replies View RelatedI have not been able to install a linux distro since 9.04. Karmic and lynx both freeze on install. (screen gets glitchy) I am a total noob when it comes to anything beyond installing.
Opteron 165
DFI lanparty ultra-d
2gb gskill
EVGA 7800gt
I tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
View 8 Replies View RelatedI cannot use several keys (1,`, q, a, z & Esc) on my keyboard.I have just installed Kubuntu 11.04, AMD64 version via Wubi. Everything went well w/o any errors. At 1st boot, I also logged in w/o errors, and then tried some apps for Office & Network and shut down. The keyboard was still alright at that time. However, The problem started on the 2nd boot after the installation. Those keys do not response in Kubuntu & Windows 7 login screen and even in my PC's BIOS setup.
My laptop model is Dell Lattitude E6410, core i5, Intel HD Graphics, WD HDD 160GB. And I installed on the other partition, not my Windows one.
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies View RelatedI'm using xterm/screen/vim, and set them up to 256 color mode. Everything went well, except when background color for the theme I choose is not black.
Here's the theme I use in this example:[URL].. Here's the situation: as long as I only use vim, the background is well rendered, meaning everything is grey in vim background. But when I try this with screen, the background is back to black, and only the text get some kind of highlight with the background color.Here are the magical lines I added to screenrc:
Code:
term screen-256color
attrcolor b ".I"
# Tell screen how to set colors. AB = background, AF=foreground
termcapinfo xterm 'Co#256:AB=E[48;5;%dm:AF=E[38;5;%dm'
# Erase background with current bg color. Not needed if TERM=screen-256color
defbce "on"
Colors are well rendered in 256 color, I only have a problem with this background. Anyone knows how to 'fix' this?
I've just upgraded to Kubuntu 10.10 recently, and everything's working well, except that the screen seems to display less colors than it used to. It's very noticeable when looking at smooth gradients, since there are no smooth gradients anymore.
I'm using a laptop with a Radeon HD 5650 video card. The drivers seem to be working well, since I can run a 3D game like Nexuiz without any problems. The lack of colors isn't even very noticeable when playing games, but I can see it clearly in KDE... for example, the window background gradient isn't really a gradient now, just a few different shades of gray next to each other.I've looked around in KDE display settings and ATI settings, but there's absolutely nothing about the number of displayed colors there.
I installed the Cairo dock and wanted to get rid of the taskbar on the left side. Found out that getting rid of Mutter would do that. Not satisfied, so long story short, reinstalled Mutter. Now I only get a white screen. No wallpaper, colors, themes, nothing. As I shut Ubuntu off I will get a flash of my wallpaper and then it's gone. 2 questions really: How do I get things back the way they were? Can I keep the dock but lose the standard sidebar?
View 1 Replies View RelatedI'm running a VNC server along with a local VNC viewer on the same RHEL5 box. The colors for my GUI components look O.K. in the VNC viewer, but a map that the viewer displays is messed up. The color of the map is too blue. My system is using X11 protocol. I'm a newbie when it comes to Linux.
View 2 Replies View RelatedFor the past month or so I have been having some issues with screen crashing and displaying funky colors. Basically it happens at completely random times, doing completely random things. The screen goes to a pink color then freezes the the only way I can gain control again is if I restart the machine or restart gdm via ssh. This is really puzzling me. Perhaps there are some logs I can look at? A little bit about my system:
Code:
Processor2x Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Memory4059MB (1321MB used)
Display[code].....
For the past month or so I have been having some issues with screen crashing and displaying funky colors. Basically it happens at completely random times, doing completely random things. The screen goes to a pink color then freezes the the only way I can gain control again is if I restart the machine or restart gdm via ssh. This is really puzzling me. Perhaps there are some logs I can look at? A little bit about my system:
[Code]....
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies View RelatedI have used Ubuntu and Linux Mint for quite some time now until I got a new machine. Some friends told me to try OpenSUSE because it has really been polished over the last few years.Install went smoothly got everything working properly except for my video card. My video card is an ATI HD4890 with sound support over HDMI. I had the sound working in Ubuntu using the non-oss ATI drivers. I was wondering if someone could please teach me how to install them again here on OpenSUSE 11.3. My screen fonts and colors also look terrible compared to Windows or Ubuntu.
Is there a way I can make it look better? I remember CCC (Catalyst Control Center for ATI) had two color formats (RGB and YCbCr). I had to set it to YCbCr because my screen is an HDTV and it looked much cleaner than RGB. Is there a way I can acheive similar results with OpenSUSE?
There's this low monotone electronic buzz coming out of my speakers. But only if the greater part of my screen is using lighter colors! Meaning, if for instance I have the terminal (black) full-screen there is no buzz. If I have it sized over the half of my screen there's a medium buzz. And if I am on the Google Search home page with the browser full screen (most of the screen white) there's a loud buzz. :SAnd it's only if I run the sound through my amplifier. It's not audible if I just use the laptopspeakers. Really, I have no idea even in what direction to start looking.
View 2 Replies View RelatedJust upgraded to 10.04.1 today and after I turn on the computer it goes to a screen asking for my username and password. Have tried to input my details but with no success.
I also tried pressing 'ALT-F7', but still no look, just takes me to a black screen with nothing.