I think this is a really simple question...forgive me. My installation of Ubuntu server went fine, the box runs great. But I forgot to select "LAMP" server for web/php/mysql etc services. I could re-run the whole thing, but isn't there a shell command to kick me back into the script so I can just add the LAMP stuff?
View 2 RepliesI have XAMPP installed on my server and would like to keep it there. However I'm pretty useless at terminal so would also like to have a control panel. Can I install LAMP over XAMPP without it interfering with my current apps? I'd like to use Easy Hosting Control Panel ( ehcp.net ) or something similar to help me manage FTP users and Mail setup but I really don't want to interfere with my current XAMPP.
View 2 Replies View Relatediam using ubuntu 9.10.I tried to install lamp server using the commandsudo tasksel install lamp-server
It shows this error:tasksel:aptitude failed(100)i tried to fix the problem by using the commandsudo apt-get updatebut it shows a list of cannnot fetch and many more.example:W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...c/main/binary-i386/Packages.gz 404 Not Found [IP: 111.91.91.34 80]Can anyone fix this problem.Please explain the steps in detail
I am trying to uninstall my LAMP server and my Drupal 7 installation. Unfortunately I cannot find any instructions on uninstalling Druapl from my system. The ones that exist are far too old( < 2008 ) to be relevant. Could someone please direct me how to go about this? Note: I did not use Synaptic for installation. I downloaded the file from the drupal.org site.
View 1 Replies View RelatedI've been messing around for a few days now trying to figure out what is going on and I feel like I'm making a stupid mistake. Essentially I'm trying to build a LAMP server (PHP) on my Mac Mini using VMWare Fusion 3 using Linux Server 9.10. To start, it's not going well at all. Once I install the LAMP portion after calling it with root permissions, I have no UI. Personally, I need a UI. Am I not understanding this? I figured once I install the LAMP packages and restart the server, there would be a user interface but nothing...
[URL]
I set up a LAMP server using tasksel and it works great, but I'm not sure about much of the specifics of it. It just works and I have not had a need to find out much about it. So I was wondering if installing updates through the update manager could possible break my LAMP server and if so what types of updates should I look for that could break it?
View 2 Replies View RelatedI thought I would play around with php for a while and so set forth to configure apache. Whilst I was reading a website for installing LAMP stuff on ubuntu I thought I would give it a go. I installed a LAMP server with:
sudo tasksel install lamp-server
and lo and behold it crashed my operating system upon restart. So both my laptop and desktop were toast.
Everything is reinstalled now so is fine and I have installed apache2 and php5 from separate packages. The one thing that's troubling me is why it crashed. It seemed to uninstall vlc media player, m-player and gnome-player as well as removing the "switch accounts" button on the lock screen. Does anyone know 1) why it died and/or 2) why it chose to eliminate those programs specifically.
I am a total noob with regards Linux so will undoubtedly frequent this board asking some lame questions in the coming weeks. At present I am trying to setup a LAMP Server on an old desktop machine I have lying about, however there is not going to be a keyboard, monitor or mouse attached beyond the installation process. My question simply is am I best installing the server or desktop version of Ubuntu for this requirement?
I have been playing with Desktop 9.04 and found it tough to use headlessly, however understand that Server 9.04 fully supports headless access. Being a newbie I do prefer to use the GUI to make changes and generally play around, so a UI such as GNOME would be essential. Having read about I understand the best way to access remotely is to install SSHServer and VNCServer and then login over SSH and VNC into the box.My remote machine I will use to connect to Ubuntu is a Windoze 7/XP machine.
I accidentally pressed Enter on the LAMP role of the 9.10 Server installation, which made it just go to the next section instead of selecting the LAMP stack. Is there any way to enable that role (like there is from Synaptic in the GUI), or do I need to install everything manually?
View 3 Replies View RelatedI've bought Earthworm Jim 1&2 from gog.com thinking that i could play it on my old Pentium 2 computer running DOS.
The problem is the game requires it's soundtrack CD, which is suplied by GOG in the form an ISO image with a .inst file that acts as some kind of header(just like a cue file is to a bin image). It contains details about the tracks. But i have no ideea how to burn it. Brasero will burn it, but it's unreadable. K3B doesn't seem to like it.
DOSBox has no problem mounting this type of image, and the game works fine after i've mounted the image.
So the question is, how should i burn this type of file(ISO Audio Image with .inst header)?
I'll also post the contents of the .inst file
Code:
FILE "EWJ1.gog" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
TRACK 02 AUDIO
[Code]....
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedI am getting crazy with my system.(I got the machine from previous guy working on it with XP, I installed myself linux, but with zero experience, 2 years ago).starting point yesterday:3 HDs in raid, SUSE 10.3 x64 installed on sdc1 with problems, XP on sda, SUSE 10.2 x32 on sda as well:
Code:
Disk /dev/sda: 250.8 GB, 250808893440 bytes
255 heads, 63 sectors/track, 30492 cylinders
[code]....
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD?
2.I have found this: [url] ... troduction is that applicable?
3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself.
4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies View RelatedI've successfully installed my LAMP server (9.10). I've ran a test.php but am curious if there are any tutorials onlines or even books to buy in order o learn how it all works. Where the files are and the mechanics of it. I have it installed but what now ha... I've done HTML, I've built websites but I'm lost!...
View 1 Replies View RelatedI installed newest Ubuntu system, 11.04, Natty-Narwhal, and PC is running smoothly. It is solid machine, Celeron 430, 1 gb of DDR2 memory and I have both LAN card and graphics integrated on the mobo which is MSI 7529, based on G31/P35/P31 chipset.
I plugged lan cable directly from my PC to the ADSL router. There is another Win Xp machine on the same router and it has connection, and internet is working fine. Right now Im writing from the Win 7 laptop, which is connected to the same router via wifi link... all working like a charm...
But, when I plug the Ubuntu desk I cannot get access to bot lan and internet...
I searched the net and it seems that ubuntu didnt install proper driver during the OS installation. Here are some diagnostics of the current config and state:
Code:
Module Size Used by
binfmt_misc 13213 1
snd_hda_codec_realtek 255820 1
code....
As you can see I need to install driver named r8101 instead this one r8169 and I think it will work that way. I found driver here only problem is dont know how to replace them.
How can I get log messages from the LAMP server on Ubuntu 10.04?Should I install some good program on Ubuntu for that purpose?
View 3 Replies View RelatedI'm using Ubuntu 10.10 and I just recently installed a LAMP server for some minor local web development.
Used the sudo tasksel command to install lamp but I can't get phpmyadmin to work nor can I access mysql.
removing the LAMP and starting all over again.
How do I go about this?
I had a working LAMP server on my old server. After a HD went out and was replaced I rebuilt my server with Ubuntu 10.10 server. Talk about a smooth and impressive install. I set up my Apache server and MySQL and even installed php5 just like I had done before on my old server. The only thing different I did with this install is with Apache. I now host 3 websites with virtual hosts. This is the only thing different I have done than the last time.
My problem now is my website won't display PHP. I didn't know I had this problem until I installed Drupal for a friend to play around with. Drupal won't finish the installation process because it claims: In your ./sites/default/settings.php file you have configured Drupal to use a server, however your PHP installation currently does not support this database type.
Know I have googled this phrase to hell and back to find a resolution and haven't. I even talked to my local linux guru at work and he refereed me here. I have tried reinstalling php left and right. I'm convinced that there is an option to enable php globally that I'm missing. I really think the virtual hosts is what is causing this trouble. What input will the mighty Ubuntu community provide me with,
I'm running with Ubuntu 10.10 Desktop edition and I have LAMP server installed on the machine. I'm wanting to host my Automotive Detailing website that I'm almost done with off of that server. I have decals made up for my car and friends cars with the domain that I have registered on it. Now, can someone please tell me where and how to put the files for my website on the server and how to configure everything so I can get it up and running ASAP?!? I'm fairly new at this Ubuntu and what not so I need a detailed tutorial
So this is what I need to know:
==> Where to put the webpage files
==> How to configure the server to open it up to the world wide web
==> How to change the IP Address to Static and how to know what to change it to.
==> How to point the registered domain to the server.
Like I said I'm fairly new at this so please be as detailed as possible!
Ran the following command from a user account listed with ALL permissions in visudo.
Code:
sudo tasksel install lamp-server
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
tasksel: aptitude failed (100)
Ubuntu 10.10point me the URL of Howto re setup a mail/LAMP server Google brought me the howto from howtoforge. I need the howto from Ubuntu documentation/Greek.
View 2 Replies View RelatedI build a LAMP server behind a router.The current situation is:1.I could access index.html of apache within the LAN.2.I could access the vsftp outside of the LAN.3.I could access the ssh outside of the LAN.I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74.***.***.***"Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 1 Replies View RelatedI build a LAMP server behind a router. The current situation is:
1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.
I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).
I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
Alright I have just got done installing Ubuntu 10.10 and Lamp, now I know I need to move all my website files to Var/WWW. Well there is a little problem, when I try to delete the two test pages or even edit them. Ubuntu tells me i do not have permission. And what confuses me the most is i installed the damn OS and i was the first account made one it i am an admin and i still cant delete
View 5 Replies View RelatedI am wanting to install the 10.04 lamp server on a winxp pro machine with several hard drives all with ntfs. Will the lamp server be able to use the ntfs partitions ? Or do i need to change them over.There is several hundred gigs of data on the hard drives and i do not relish the job of converting them.Also can you just mount the ntfs shares that are on the windows machine with the ubuntu machine using a intranet type setup
View 3 Replies View RelatedIs it possible to download MySQL, Apache and PHP first? And install them on Ubuntu system offline. Is anybody know how can I get them and install them?
I have to install LAMP server on many system for the purpose of training. So I don't want to download them repeatably. Once download them, install on all system.
I need to install LAMP server in Debian 6. But like Ubuntu there is no option to install Lamp Server
View 7 Replies View RelatedI have 3 virtual machines set up. 2 are servers and one is a client. On one of the servers I have installed apache, mysql, and php and mod_ssl. I can get to the web site on the server from my client system. I can even get to the info php site--the screen that shows everything about php (it's purplish!) I can also get to the secure https site. The one thing I can't do is get my table to display.I have set up a new user in mysql. I have granted that user all privileges. I have created a table on a new database in mysql. I then set up php code within html code But every time I try to go to my test.php site it only gives me the header. It obviously cannot find the table array. This is the code and someone already told me it looked right to them. So I am not sure what I am doing wrong.
View 14 Replies View RelatedI've been searching around the net how to do this but I can't find any clues. I did this:
Code:
sudo apt-get install lamp-server^
But now I want to remove it. I've read this: http://ubuntuforums.org/showthread.php?t=510403
[code]....