I accidentally pressed Enter on the LAMP role of the 9.10 Server installation, which made it just go to the next section instead of selecting the LAMP stack. Is there any way to enable that role (like there is from Synaptic in the GUI), or do I need to install everything manually?
View 3 RepliesI am trying to uninstall my LAMP server and my Drupal 7 installation. Unfortunately I cannot find any instructions on uninstalling Druapl from my system. The ones that exist are far too old( < 2008 ) to be relevant. Could someone please direct me how to go about this? Note: I did not use Synaptic for installation. I downloaded the file from the drupal.org site.
View 1 Replies View Relatediam using ubuntu 9.10.I tried to install lamp server using the commandsudo tasksel install lamp-server
It shows this error:tasksel:aptitude failed(100)i tried to fix the problem by using the commandsudo apt-get updatebut it shows a list of cannnot fetch and many more.example:W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...c/main/binary-i386/Packages.gz 404 Not Found [IP: 111.91.91.34 80]Can anyone fix this problem.Please explain the steps in detail
I set up a LAMP server using tasksel and it works great, but I'm not sure about much of the specifics of it. It just works and I have not had a need to find out much about it. So I was wondering if installing updates through the update manager could possible break my LAMP server and if so what types of updates should I look for that could break it?
View 2 Replies View RelatedI thought I would play around with php for a while and so set forth to configure apache. Whilst I was reading a website for installing LAMP stuff on ubuntu I thought I would give it a go. I installed a LAMP server with:
sudo tasksel install lamp-server
and lo and behold it crashed my operating system upon restart. So both my laptop and desktop were toast.
Everything is reinstalled now so is fine and I have installed apache2 and php5 from separate packages. The one thing that's troubling me is why it crashed. It seemed to uninstall vlc media player, m-player and gnome-player as well as removing the "switch accounts" button on the lock screen. Does anyone know 1) why it died and/or 2) why it chose to eliminate those programs specifically.
I am a total noob with regards Linux so will undoubtedly frequent this board asking some lame questions in the coming weeks. At present I am trying to setup a LAMP Server on an old desktop machine I have lying about, however there is not going to be a keyboard, monitor or mouse attached beyond the installation process. My question simply is am I best installing the server or desktop version of Ubuntu for this requirement?
I have been playing with Desktop 9.04 and found it tough to use headlessly, however understand that Server 9.04 fully supports headless access. Being a newbie I do prefer to use the GUI to make changes and generally play around, so a UI such as GNOME would be essential. Having read about I understand the best way to access remotely is to install SSHServer and VNCServer and then login over SSH and VNC into the box.My remote machine I will use to connect to Ubuntu is a Windoze 7/XP machine.
I think this is a really simple question...forgive me. My installation of Ubuntu server went fine, the box runs great. But I forgot to select "LAMP" server for web/php/mysql etc services. I could re-run the whole thing, but isn't there a shell command to kick me back into the script so I can just add the LAMP stuff?
View 2 Replies View RelatedI've been messing around for a few days now trying to figure out what is going on and I feel like I'm making a stupid mistake. Essentially I'm trying to build a LAMP server (PHP) on my Mac Mini using VMWare Fusion 3 using Linux Server 9.10. To start, it's not going well at all. Once I install the LAMP portion after calling it with root permissions, I have no UI. Personally, I need a UI. Am I not understanding this? I figured once I install the LAMP packages and restart the server, there would be a user interface but nothing...
[URL]
I'm trying to turn an old Acer Aspire One with a tiny 8GB solid-state drive into a lean web server, so I'd like to remove as many packages as possible to free up space. It will be running a standard LAMP install and nothing else. Right now it has Ubuntu Netbook installed, so I need to know everything I can delete and still have it boot and run mysql, apache, etc.
View 5 Replies View RelatedCentoS 5.5
[root@osra ~]# rpm -q samba3x
samba3x-3.3.8-0.52.el5_5.2
[root@osra ~]# rpm -q krb5-workstation
krb5-workstation-1.6.1-36.el5_5.5
Domain controller windows 2k3 sp3
I follow those guides: [URL] and [URL]. I join the domain, I can test the user
[root@osra ~]# wbinfo -a mbottalico%
plaintext password authentication succeeded
challenge/response password authentication succeeded
[root@osra ~]# wbinfo -u
administrator
guest
krbtgt
[root@osra ~]# wbinfo -g
utenti wins
dhcp users
dhcp administrators
computer del dominio
controller di dominio
getent passwd and group ok without "DOMAIN+"
kinit e klist ok.
I can browser the samba server, but I can enter on "temp", but not in "test" (access denied)
[root@osra ~]# smbclient \\osra\test -U administrator
Enter administrator's password:
Domain=[DOMAINSHORT] OS=[Unix] Server=[Samba 3.3.8-0.52.el5_5.2]
smb: > ls
NT_STATUS_NETWORK_ACCESS_DENIED listing * (I noticed only writing this message)
[root@osra ~]# smbclient \\osra\tmp -U administrator
Enter administrator's password:
Domain=[DOMAINSHORT] OS=[Unix] Server=[Samba 3.3.8-0.52.el5_5.2]
smb: > dir .....
53488 blocks of size 2097152. 49908 blocks available
smb: > q
0 blocks of size 0. 511 blocks available .....
I'm starting to use Ubuntu and i install in a machine the ubuntu 10.10. Now i'm trying to install some software in the OS (the PHP5, Apache, etc), but i'm having some problems.
This forum have some threads explaining how to install in with a server cd, but i don't have this cd. Where can i get it? Can i install now the software? There is some site to download the apache? What's the steps that i have to do to install the software?
What was the equivalent apt-get command for installing LAMP and OpenSSH in Ubuntu 10.10?
View 1 Replies View RelatedHow can I install lamp on ubuntu desktop but not from online repository but from installation cd or usb stick. Basically, i want to download lamp (still can't find from where), put it on a cd or usb stick and install it on ubuntu desktop on which doesn't have an internet connection, just local network. I have a php software (intranet web site) that should run only in local network.
View 3 Replies View RelatedI am working on Fedora core 9.I want to install LAMP-apache with version 2.2 or more,php with version 5.1.4 or more and my sql with version 4 or more.Can someone please suggest any website or the steps to do this installation.
View 2 Replies View RelatedI'm going crazy with the problem I posted on yesterday about Wordpress not working properly on my Ubuntu systems on the LAN. http://ubuntuforums.org/showthread.php?t=1501043
After comparing results from phpinfo() with those from my public server, making a few adjustments and still seeing the same results, the biggest thing still to be tested is the Suhosin version of PHP. My public server doesn't have the Suhosin version installed. I can't figure out how to change the PHP to one without Suhosin, but I've seen some mentions of it not being installed by default on a fresh version of 10.04.
Is this true, and if so how can I build a LAMP server without Suhosin?
how to create a website using LAMP. Take completed website and port to a web server and run.
System I am currently running an HP Pavillion laptop 500G HD, 6G RAM, dual boot Fedora 10 and Vista.
Questions: How should I partition HD to allow functionality of LAMP and to later transfer to a online webserver.
I have read several different rational on partitioning the disk. Do I really need a /tmp, /var? Currently I have / /boot, /swap, /home, /usr. Is this okay to start? Will it make transferring the project more difficult for "official use?
Should I not use the laptop at all and create a separate machine for this purpose only?
I have XAMPP installed on my server and would like to keep it there. However I'm pretty useless at terminal so would also like to have a control panel. Can I install LAMP over XAMPP without it interfering with my current apps? I'd like to use Easy Hosting Control Panel ( ehcp.net ) or something similar to help me manage FTP users and Mail setup but I really don't want to interfere with my current XAMPP.
View 2 Replies View RelatedI have a desktop running on Fedora 14. I installed LAMP by using scripts for package installation. That works fine. Also, I have a virtual environment (Virtual Machine Manager), in which I installed Fedora 14 as well. I tried to install LAMP by the same scripts and the same packages as on my desktop, but strangely - it does not work.
I figured out that in both cases two instances of httpd.conf are installed, one residing in /etc/httpd/conf/, the other one in /usr/local/apache2/conf. The first one seems to belong to the server that is by default installed together with Fedora 14. The second one is the result from the package installation.
For a reason unknown to me, the second one (/etc/httpd/conf/httpd.conf) is always activated on my desktop, while the first one (/usr/local/apache2/conf/httpd.conf) is activated by default in my virtual computer. I have been able to change the DocumentRoot with succes.
I know how to install LAMP with yum, I have a second virtual computer with LAMP installed by yum, and the whole question is not an urgent one, but... I am just curious... what could have caused the difference? And what would I have to do whenever I would like to use the package installation or vice versa?
All of the guides I could find online were from 2004 and they no longer work. someone create a step by step guide? I have Apache working, but PHP does not work.
View 1 Replies View RelatedI did everything and restarted my machine, everything seems to be ok. But when i type in my IP on the browser which is 10.0.11.25 which would be the localhost machine, i get this below:
Code:
ERROR The requested URL could not be retrieved
While trying to retrieve the URL: [URL] The following error was encountered:
* Connection to 10.0.11.25 Failed
The system returned:
(113) No route to host
The remote host or network may be down. Please try the request again.
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedI'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD?
2.I have found this: [url] ... troduction is that applicable?
3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself.
4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies View RelatedI've successfully installed my LAMP server (9.10). I've ran a test.php but am curious if there are any tutorials onlines or even books to buy in order o learn how it all works. Where the files are and the mechanics of it. I have it installed but what now ha... I've done HTML, I've built websites but I'm lost!...
View 1 Replies View RelatedHow can I get log messages from the LAMP server on Ubuntu 10.04?Should I install some good program on Ubuntu for that purpose?
View 3 Replies View RelatedI'm using Ubuntu 10.10 and I just recently installed a LAMP server for some minor local web development.
Used the sudo tasksel command to install lamp but I can't get phpmyadmin to work nor can I access mysql.
removing the LAMP and starting all over again.
How do I go about this?
I had a working LAMP server on my old server. After a HD went out and was replaced I rebuilt my server with Ubuntu 10.10 server. Talk about a smooth and impressive install. I set up my Apache server and MySQL and even installed php5 just like I had done before on my old server. The only thing different I did with this install is with Apache. I now host 3 websites with virtual hosts. This is the only thing different I have done than the last time.
My problem now is my website won't display PHP. I didn't know I had this problem until I installed Drupal for a friend to play around with. Drupal won't finish the installation process because it claims: In your ./sites/default/settings.php file you have configured Drupal to use a server, however your PHP installation currently does not support this database type.
Know I have googled this phrase to hell and back to find a resolution and haven't. I even talked to my local linux guru at work and he refereed me here. I have tried reinstalling php left and right. I'm convinced that there is an option to enable php globally that I'm missing. I really think the virtual hosts is what is causing this trouble. What input will the mighty Ubuntu community provide me with,
I'm running with Ubuntu 10.10 Desktop edition and I have LAMP server installed on the machine. I'm wanting to host my Automotive Detailing website that I'm almost done with off of that server. I have decals made up for my car and friends cars with the domain that I have registered on it. Now, can someone please tell me where and how to put the files for my website on the server and how to configure everything so I can get it up and running ASAP?!? I'm fairly new at this Ubuntu and what not so I need a detailed tutorial
So this is what I need to know:
==> Where to put the webpage files
==> How to configure the server to open it up to the world wide web
==> How to change the IP Address to Static and how to know what to change it to.
==> How to point the registered domain to the server.
Like I said I'm fairly new at this so please be as detailed as possible!
Ran the following command from a user account listed with ALL permissions in visudo.
Code:
sudo tasksel install lamp-server
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
tasksel: aptitude failed (100)