Ubuntu Servers :: PHP Is Not Co-operating On LAMP Server?
Jan 25, 2011
I had a working LAMP server on my old server. After a HD went out and was replaced I rebuilt my server with Ubuntu 10.10 server. Talk about a smooth and impressive install. I set up my Apache server and MySQL and even installed php5 just like I had done before on my old server. The only thing different I did with this install is with Apache. I now host 3 websites with virtual hosts. This is the only thing different I have done than the last time.
My problem now is my website won't display PHP. I didn't know I had this problem until I installed Drupal for a friend to play around with. Drupal won't finish the installation process because it claims: In your ./sites/default/settings.php file you have configured Drupal to use a server, however your PHP installation currently does not support this database type.
Know I have googled this phrase to hell and back to find a resolution and haven't. I even talked to my local linux guru at work and he refereed me here. I have tried reinstalling php left and right. I'm convinced that there is an option to enable php globally that I'm missing. I really think the virtual hosts is what is causing this trouble. What input will the mighty Ubuntu community provide me with,
View 4 Replies
ADVERTISEMENT
Feb 6, 2010
I've successfully installed my LAMP server (9.10). I've ran a test.php but am curious if there are any tutorials onlines or even books to buy in order o learn how it all works. Where the files are and the mechanics of it. I have it installed but what now ha... I've done HTML, I've built websites but I'm lost!...
View 1 Replies
View Related
May 18, 2011
Ran the following command from a user account listed with ALL permissions in visudo.
Code:
sudo tasksel install lamp-server
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
tasksel: aptitude failed (100)
View 2 Replies
View Related
Dec 9, 2010
I build a LAMP server behind a router. The current situation is:
1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.
I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).
I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 3 Replies
View Related
Mar 11, 2011
I am wanting to install the 10.04 lamp server on a winxp pro machine with several hard drives all with ntfs. Will the lamp server be able to use the ntfs partitions ? Or do i need to change them over.There is several hundred gigs of data on the hard drives and i do not relish the job of converting them.Also can you just mount the ntfs shares that are on the windows machine with the ubuntu machine using a intranet type setup
View 3 Replies
View Related
Jan 24, 2010
I've been searching around the net how to do this but I can't find any clues. I did this:
Code:
sudo apt-get install lamp-server^
But now I want to remove it. I've read this: http://ubuntuforums.org/showthread.php?t=510403
[code]....
View 7 Replies
View Related
Oct 30, 2010
I am sure there is a nice guide out there somewhere but I cannot find it. My question is: The company I work for has a fully windows environment, servers and clients. The current server is on a Windows 2000 Server and I plan on replacing that. I wish to use Ubuntu server with Joomla for this purpose. This is my first venture into a purely command line interface, although I have played around with Ubuntu desktop in the past. My first question right now is: How do I log onto the Windows Network (active directory) from the ubuntu server. eth0 is reporting a valid internal IP on the network, so its been picked up okay.
Edit: I also want to assign a static internal IP address instead of grabbing from the DHCP. Edit2: Thinking about it, as the ubuntu server and windows server can ping each other do I even need to log into the domain? The server will only be serving web pages.
View 3 Replies
View Related
Dec 23, 2010
I have Ubuntu 10.10 and i installed the lamp-server by typing:
Code:
sudo apt-get install lamp-server^
everything seemed to work fine.
[code]....
View 9 Replies
View Related
Jan 20, 2011
I need to first point out that I am a complete n00b when it comes to Ubuntu Server, and I managed to install Ubuntu Server 10.04.1 (on a screen-less Acer Aspire 5100 laptop) with Apache2, MySQL, OpenSSH, & PHP5. I currently have this server (hosting my website) behind a linksys router with only port 22, and 80 forwarded to its ip address. Now my question is: Would it be safe to configure a print server on the same machine in order to print from the 3 other computers on my router to one printer, or are there security risks involved (like what I have heard with LAMP servers and Samba on the same machine)? I am also wondering if it is safe the way I configured port 80 & 22? It has extremely long passwords, and I also went through the secure installation of one of the programs setting a root password too... But can somebody please help me with my server? I am very surprised I have gone this far in my first 2 weeks of my Web Scripting class too!
View 1 Replies
View Related
May 7, 2011
Main purpose of this LAMP server is testing development. I would like to get this server setup up almost exactly to a T how my real web hosting server is setup. I am running 11.04 and have installed LAMP. I also installed vsftpd. I went ahead and made a symlink from /home/user/public_html to /var/www/. I login from a Windows 7 computer via CuteFTP to my Ubuntu server. I can enter the public_html directory and can create folders but the default permissions for any folder created is 700. I have tried running chmod -R 755 /home/user/public_html but this does not work. Every file or folder created now currently will take a 700 permission.
How do I make it so anything that is uploaded into this folder will be at either 755 or 775? Also what is the best practice for utilizing the /var/www directory? Should I be using a symlink to link it to my user's home folder? I have read through so many posts with regards to adding users to a group and giving this group permission and this or that I'm so confused.
View 2 Replies
View Related
May 25, 2011
I am looking to create a multi-user LAMP server. For example the domain name behind my curent server is [URL] I would like user1 to have [URL] and user2 [URL]
View 9 Replies
View Related
Apr 14, 2011
Do I need to do anything special to my LAMP server for AJAX to work?
View 2 Replies
View Related
Jun 7, 2010
I have successfully installed Openldap and am able to authenticate to it, but I can not get the replication server operating correctly. I have followed all of the steps in doing so from this guide, [URL], but there are a few things i don't understand. when creating the consumer_sync.ldif file on the consumer server it says to replace ldap01.example.com to your server's hostname.
would this be the provider or consumer? My porvider is ldap@tech.local and my consumer is ldap-backup@tech.local.... so what one are they refurring to with the ldap01? And is there a way to push, or sync the two server manually? How do I know if they are backing up properly? How do I test?
View 1 Replies
View Related
Jul 15, 2010
I need to uninstall Lamp from my Ubuntu 10.04 OS. I just need to commands etc as I am rather noob at Ubuntu. I will be installing it again I just have come across several problems.
View 2 Replies
View Related
Dec 22, 2010
I've looked at several tutorials and since i'm a newb I can't figure them out. I'm trying to set my hostname on my LAMP 10.04. What files do I need to configure? (all IP's below are fake)
Here are the first lines from /etc/apache2/sites-available/default
Code:
<VirtualHost 111.111.111.111:80>
ServerAdmin webmaster@localhost
/etc/apache2/ports.conf has these lines after the comments
[Code]....
View 4 Replies
View Related
May 24, 2011
I'm using ubuntu server 11.04 in a LAMP configuration. I have my login page setup but my php email verification isnt working. I would like to know how can I install a relay that can take the email verifications and send them through a gmail account.
View 2 Replies
View Related
Jan 13, 2010
I have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
View 4 Replies
View Related
May 4, 2010
End of my first week after using ubuntu. I have setup LAMP for the purposes of my own coding education, place to run php and python scripts.
LAMP seems to be setup fine and working - I even got php5 working with it - however I am having a lot more trouble getting python to work in much the same manner.
I have downloaded the mod_python from [URL], unzipped it, tried to run ./configure and it said apxs was not installed.
After some reading it turns out I had to remove some apache-fork something and install apache-devfork (please forgive lack of exact names).
After doing this the ./configure on mod_python passed the "finding apxs" test but then said it can't find apache2 at /sbin/apache2 and again aborted the configure.
running 10.4 (lucid)
View 1 Replies
View Related
Jul 23, 2010
PHP in *.php files works in LAMP. PHP script within an *.html file is not executed. Does not display anything but view->source_code shows the <?php ... ?>
[Code]...
Doesn't display anything except the page title is there. View page source --- shows <?php phpinfo() ?> not the phpinfo() output. Both files are in /var/www/ with 644 permissions.
[Code]...
View 9 Replies
View Related
Aug 25, 2010
Basically I've made a right **** up of my apache2 configuration and I just want to un-install apache2 and re-install so I can start again.
I've done research on this but the guides have always been for people installing using "apt-get" or "rpm" packages. I've tried these methods but nothing has worked.
The way I installed lamp was from selecting it in the different options when installing ubuntu-server from disk.
Is there any way I can do this through the terminal and not through synaptic, only reason being is that I'm ssh'ing across a local network.
View 2 Replies
View Related
Oct 11, 2010
I've installed developer's LAMP server and made changes on php.ini
But it doesn't display any errors or even a little warning, what's the problem, what's wrong?
View 9 Replies
View Related
Jul 15, 2010
Is there an easy way to transfer Webserver data from one ubuntu install to a new one? I know I'll need to get the stuff in /var/www and (somehow) the Mysql data, but are there files elsewhere to get? Or is there a better way than trying to copy all the various files?
View 2 Replies
View Related
Jan 5, 2011
I am trying to set up my local development environment to mimic the behaviour of my webhost: namely executing *.cgi files as CGI scripts, regardless of their location. If I'm not mistaken, the default setup of Apache on Ubuntu has this set up for /usr/lib/cgi-bin only.
I have tried adding +ExecCGI to the /var/www directory settings in /etc/apache2/sites-enabled/000-default. I have also tried AddHandler cgi-script .cgi in the same <directory> block.
View 3 Replies
View Related
Mar 4, 2011
I've recently setup LAMP on my VPS.I believe I may have broken the PHP configuration somehow, not 100% sure exactly how, but I'm getting internal server errors upon loading .php files.
*Edit* phpmyadmin still runs fine so maybe there's an error in my Apache configuration or my VirtualHosts?
View 3 Replies
View Related
Sep 2, 2011
I want to use yum to install LAMP with ssl. Is there a certain order I have to do that in? If I understand this right, yum gets its rpms from one repository. In order to maintain the rpms I will need to know the installation layout of each rpm. How will I find this information?
Also, can I tell yum to go to a certain place and get that rpm? For instance, I've been reading linux topia. Can I tell yum to get that mysql rpm?
Once mysql is installed, how do I start it and get into the client/monitor?
View 3 Replies
View Related
Aug 18, 2011
In my Fedora 14 I want to setup "PHP,MYSQL,APACHE+PhpMyAdmin" for my Web Server.
View 3 Replies
View Related
Jan 21, 2010
Just installed lamp, I can access phpmyadmin mysql is set up and everything. When I try to view a directory [URL] I get an access denied error.
EDIT: I changed the permissions of the "folder" folder itself, I can access everything in that directory now but not any other folders in it. Do I really need to go through every folder every time and change the permissions?
View 4 Replies
View Related
Feb 28, 2010
I have installed ubuntu 9.10 server with LAMP and SAMBA I have also added FMS (Flash Media Server). LAMP and SAMBA are running fine but FMS doesn't have all its functionality, it cant stream rttp.I have read that their may be a port/ip conflict between apache and fms but was wondering if anyone else had the same issues as me. I have also installed FMS with apache2 on my XP laptop to get the httpd.conf file and see how its set up, here it is.FMS / APACHE2 XP
Code:
#
# This is the main Apache server configuration file. It contains the
[code]....
View 3 Replies
View Related
Mar 9, 2010
I'd like to setup an Ubuntu LAMP server, and provide limited access to it for our in-house web developers/designers. I'm not quite sure how to go about the permissions side of things. Which user/group should "own" the /var/www directory? Is it www-data?
How do I create user accounts (for our developers) that have access to the /var/www directory - do I create accounts then add them to the www-data group? Or should I make a special 'webdev' group and give it access somehow?
View 5 Replies
View Related
Jun 13, 2010
I just installed LAMP on ubuntu 10.04using this method:ow i want to change the directory where my websites are; default is "/var/www" right. I have a partition using NTSF file system where i have a folder with all my websites. Can i configure LAMP to use this folder?
View 9 Replies
View Related
