Ubuntu Servers :: Build LAMP Server Behind A Router?
Dec 9, 2010
I build a LAMP server behind a router. The current situation is:
1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.
I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).
I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 3 Replies
ADVERTISEMENT
Dec 9, 2010
I build a LAMP server behind a router.The current situation is:1.I could access index.html of apache within the LAN.2.I could access the vsftp outside of the LAN.3.I could access the ssh outside of the LAN.I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74.***.***.***"Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.
View 1 Replies
View Related
Feb 6, 2010
I've successfully installed my LAMP server (9.10). I've ran a test.php but am curious if there are any tutorials onlines or even books to buy in order o learn how it all works. Where the files are and the mechanics of it. I have it installed but what now ha... I've done HTML, I've built websites but I'm lost!...
View 1 Replies
View Related
Jan 25, 2011
I had a working LAMP server on my old server. After a HD went out and was replaced I rebuilt my server with Ubuntu 10.10 server. Talk about a smooth and impressive install. I set up my Apache server and MySQL and even installed php5 just like I had done before on my old server. The only thing different I did with this install is with Apache. I now host 3 websites with virtual hosts. This is the only thing different I have done than the last time.
My problem now is my website won't display PHP. I didn't know I had this problem until I installed Drupal for a friend to play around with. Drupal won't finish the installation process because it claims: In your ./sites/default/settings.php file you have configured Drupal to use a server, however your PHP installation currently does not support this database type.
Know I have googled this phrase to hell and back to find a resolution and haven't. I even talked to my local linux guru at work and he refereed me here. I have tried reinstalling php left and right. I'm convinced that there is an option to enable php globally that I'm missing. I really think the virtual hosts is what is causing this trouble. What input will the mighty Ubuntu community provide me with,
View 4 Replies
View Related
May 18, 2011
Ran the following command from a user account listed with ALL permissions in visudo.
Code:
sudo tasksel install lamp-server
debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
tasksel: aptitude failed (100)
View 2 Replies
View Related
Mar 11, 2011
I am wanting to install the 10.04 lamp server on a winxp pro machine with several hard drives all with ntfs. Will the lamp server be able to use the ntfs partitions ? Or do i need to change them over.There is several hundred gigs of data on the hard drives and i do not relish the job of converting them.Also can you just mount the ntfs shares that are on the windows machine with the ubuntu machine using a intranet type setup
View 3 Replies
View Related
Jan 24, 2010
I've been searching around the net how to do this but I can't find any clues. I did this:
Code:
sudo apt-get install lamp-server^
But now I want to remove it. I've read this: http://ubuntuforums.org/showthread.php?t=510403
[code]....
View 7 Replies
View Related
Oct 30, 2010
I am sure there is a nice guide out there somewhere but I cannot find it. My question is: The company I work for has a fully windows environment, servers and clients. The current server is on a Windows 2000 Server and I plan on replacing that. I wish to use Ubuntu server with Joomla for this purpose. This is my first venture into a purely command line interface, although I have played around with Ubuntu desktop in the past. My first question right now is: How do I log onto the Windows Network (active directory) from the ubuntu server. eth0 is reporting a valid internal IP on the network, so its been picked up okay.
Edit: I also want to assign a static internal IP address instead of grabbing from the DHCP. Edit2: Thinking about it, as the ubuntu server and windows server can ping each other do I even need to log into the domain? The server will only be serving web pages.
View 3 Replies
View Related
Dec 23, 2010
I have Ubuntu 10.10 and i installed the lamp-server by typing:
Code:
sudo apt-get install lamp-server^
everything seemed to work fine.
[code]....
View 9 Replies
View Related
Jan 20, 2011
I need to first point out that I am a complete n00b when it comes to Ubuntu Server, and I managed to install Ubuntu Server 10.04.1 (on a screen-less Acer Aspire 5100 laptop) with Apache2, MySQL, OpenSSH, & PHP5. I currently have this server (hosting my website) behind a linksys router with only port 22, and 80 forwarded to its ip address. Now my question is: Would it be safe to configure a print server on the same machine in order to print from the 3 other computers on my router to one printer, or are there security risks involved (like what I have heard with LAMP servers and Samba on the same machine)? I am also wondering if it is safe the way I configured port 80 & 22? It has extremely long passwords, and I also went through the secure installation of one of the programs setting a root password too... But can somebody please help me with my server? I am very surprised I have gone this far in my first 2 weeks of my Web Scripting class too!
View 1 Replies
View Related
May 7, 2011
Main purpose of this LAMP server is testing development. I would like to get this server setup up almost exactly to a T how my real web hosting server is setup. I am running 11.04 and have installed LAMP. I also installed vsftpd. I went ahead and made a symlink from /home/user/public_html to /var/www/. I login from a Windows 7 computer via CuteFTP to my Ubuntu server. I can enter the public_html directory and can create folders but the default permissions for any folder created is 700. I have tried running chmod -R 755 /home/user/public_html but this does not work. Every file or folder created now currently will take a 700 permission.
How do I make it so anything that is uploaded into this folder will be at either 755 or 775? Also what is the best practice for utilizing the /var/www directory? Should I be using a symlink to link it to my user's home folder? I have read through so many posts with regards to adding users to a group and giving this group permission and this or that I'm so confused.
View 2 Replies
View Related
May 25, 2011
I am looking to create a multi-user LAMP server. For example the domain name behind my curent server is [URL] I would like user1 to have [URL] and user2 [URL]
View 9 Replies
View Related
Apr 14, 2011
Do I need to do anything special to my LAMP server for AJAX to work?
View 2 Replies
View Related
Jul 1, 2011
I am looking for the best/cheapest way to build a ubuntu server with 8tb of storage hanging off of it.
I don't feel it needs to be hardware raid, so more software raiding swap in and out failed disk drives.
The server itself normal duo core CPU with 2Gb of memory and i would like to have the internal drive of the O/S only.
View 8 Replies
View Related
Jul 16, 2010
i have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing
View 3 Replies
View Related
Dec 12, 2010
I am a total noob in the process of trying to build my own server. I installed Ubuntu 10.10 but when I did that I didn't have the computer hooked up with an ethernet or have any internet connection. During the installation process it was unable to set up DHCP, so I figured I would just do that later, somehow.
Anyways, I recently hooked up an ethernet cable from the server to another computer, which has internet.
I've been slowly working my way through the Server Documentation and am on the Networking chapter. It has given me the commands to install wireless-tools, ethtool, dhcp3 server and I've also tried to install gedit. Every time it gives me the error: E: Unable to locate package XXX
When I ran the sudo lshw -class network command I find that it recognizes both an ethernet interface as well as a wireless interface(my wireless adapter). BOTH of them say *-network DISABLED.
My goal is to enable both of those, but I am assuming I need to be able to locate the packages first. I installed the server edition using a USB pendrive. I still have the files on the pendrive, but I don't know how to make the server locate those files. I'm guessing it wants to access the installation files to locate the packages to install.
View 7 Replies
View Related
Jan 13, 2011
I'm getting my first server in a few weeks. I hear a lot about people using their server as a router. That sounds like an interesting prospect, as I think it would increase security and control, with all web traffic going through one central hub so to speak.If I do this, how do I handle wireless? Do I just hook my wireless router to my server, basically making the internet connection go through the server before it gets to the router?
View 8 Replies
View Related
Oct 15, 2009
I start to build up IMPS to my server. Any ideas where to start? Any experience so far. I this think yamicocom like service. And about 5 bugs to get in. What you think? I need to put some extra to this basic concept.
View 2 Replies
View Related
Jul 29, 2011
Im having problems turning my server into a gateway. I followed this guide- [URL]- and I cant get it to work.In my server I installed two new gigabit network cards, and I cant seem to be able to get it to work.
View 2 Replies
View Related
Feb 24, 2011
I need to build a 3 node web server cluster to run a php application. Since the app requires users to login (which means a session state is to be maintained), I will be sharing sessions save path, I also need to share the application directory across 3 nodes. I having trouble deciding which cluster file system to select.
View 5 Replies
View Related
Feb 20, 2011
I have an Actiontec GT724WGR and I am having problems with my Ubuntu server. I set up a subdomain on freedns.afraid.org with my main computer's external ip. However whenever I use the link that was made it goes to my router configuration page instead of onto my server. I have already set up a static ip for my server enabled DMZ hosting and under port forwarding applied every single rule that applied to servers.
View 2 Replies
View Related
Mar 14, 2010
I just finished setting up my small server, however I realized that no one can connect to it from the outside. The reason being is that my router is assigning internal ip's and dyndns is linked to that. I need port 80 for the Apache server, but if I have the router forward that port to my particular ip, won't it screw with everyone else's internet too?
View 5 Replies
View Related
May 27, 2010
I've setup OpenVPN-ALS (formerly known as Adito) on Ubuntu Server 10.04 edition. I have a security router (Untangle) in front of my internal network. I have a domain name and an SSL Certificate setup on our security router. I can access our web interface on our security router with no problems.
I've setup a portforward rule on our router to access this OpenVPN-ALS portal and I can access it, but I get an invalid certificate message. So I've bought another SSL certificate to install our our Portal, but I'm getting an error message when I enter in our information at the provider where I've bought the certificate.
Common Name does not contain fully qualified domain name. I'm not sure what the problem is. Do I use the hostname I've setup on the portal or do I use the hostname on my security router when I setup the SSL certificate on our portal?
View 5 Replies
View Related
Jul 15, 2010
I need to uninstall Lamp from my Ubuntu 10.04 OS. I just need to commands etc as I am rather noob at Ubuntu. I will be installing it again I just have come across several problems.
View 2 Replies
View Related
Dec 22, 2010
I've looked at several tutorials and since i'm a newb I can't figure them out. I'm trying to set my hostname on my LAMP 10.04. What files do I need to configure? (all IP's below are fake)
Here are the first lines from /etc/apache2/sites-available/default
Code:
<VirtualHost 111.111.111.111:80>
ServerAdmin webmaster@localhost
/etc/apache2/ports.conf has these lines after the comments
[Code]....
View 4 Replies
View Related
May 24, 2011
I'm using ubuntu server 11.04 in a LAMP configuration. I have my login page setup but my php email verification isnt working. I would like to know how can I install a relay that can take the email verifications and send them through a gmail account.
View 2 Replies
View Related
Jan 13, 2010
I have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
View 4 Replies
View Related
May 4, 2010
End of my first week after using ubuntu. I have setup LAMP for the purposes of my own coding education, place to run php and python scripts.
LAMP seems to be setup fine and working - I even got php5 working with it - however I am having a lot more trouble getting python to work in much the same manner.
I have downloaded the mod_python from [URL], unzipped it, tried to run ./configure and it said apxs was not installed.
After some reading it turns out I had to remove some apache-fork something and install apache-devfork (please forgive lack of exact names).
After doing this the ./configure on mod_python passed the "finding apxs" test but then said it can't find apache2 at /sbin/apache2 and again aborted the configure.
running 10.4 (lucid)
View 1 Replies
View Related
Jul 23, 2010
PHP in *.php files works in LAMP. PHP script within an *.html file is not executed. Does not display anything but view->source_code shows the <?php ... ?>
[Code]...
Doesn't display anything except the page title is there. View page source --- shows <?php phpinfo() ?> not the phpinfo() output. Both files are in /var/www/ with 644 permissions.
[Code]...
View 9 Replies
View Related
Aug 25, 2010
Basically I've made a right **** up of my apache2 configuration and I just want to un-install apache2 and re-install so I can start again.
I've done research on this but the guides have always been for people installing using "apt-get" or "rpm" packages. I've tried these methods but nothing has worked.
The way I installed lamp was from selecting it in the different options when installing ubuntu-server from disk.
Is there any way I can do this through the terminal and not through synaptic, only reason being is that I'm ssh'ing across a local network.
View 2 Replies
View Related
