Debian :: Intranet Server With LAMP - Mail Server ?
Aug 23, 2011
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD?
2.I have found this: [url] ... troduction is that applicable?
3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself.
4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
View 1 Replies
ADVERTISEMENT
Mar 14, 2011
I want to setup an intranet mail server as a project. I tried to go through various forums but could not get a satisfactory model. My sceme of things is as follows:The server a virtual machine is after a router which has a built in dhcp server. Prefer to use sendmail but postfix ok client machines should be able to access the mail on evolution/thunderbird or web access using squirrelmail.Mail will not be relayed to anybody outside the intranet.
View 1 Replies
View Related
Oct 14, 2010
Ubuntu 10.10point me the URL of Howto re setup a mail/LAMP server Google brought me the howto from howtoforge. I need the howto from Ubuntu documentation/Greek.
View 2 Replies
View Related
May 16, 2010
I have a LAMP server and need a web page to send email messages. I could do it with my Win 2k server through my cable service but can't seem to get it to work here.
View 9 Replies
View Related
May 23, 2010
setting up my LAMP server to send email messages through my cable network SMTP server. If you respond please realize that I am new to linux/apache. I cannot send emails out with the built in email server on Suse and don't even know if it is enabled. I used to do it with my IIS/ColdFusion server but there were options for the outbound SMTP server and authentication. I have searched and think I have to use something called Pear but to be honest the instructions are vague to say the least and it all looks greek to me.
View 2 Replies
View Related
Jun 4, 2010
I have been trying to set up an old pIII 700Mhz PC as a local intranet server to run some PHP code.
I have got debian installed setup ssh since it is a headless computer mounted a usb hard drive to store the web page remapped apache2 to use the /mnt/sda1/html/ folder and tested that php scripts are running
now what i can't seem to get working is the following:
ftp access to /mnt/sda1/html so I can upload files from my pc on the network and
phpmyadmin so i can easily manipulat mySQL databases.
after reading [URL] I typed in #apt-get install phpmyadmin
it downloads a bunch of stuff and says it is installing it but when i do the next step in the instructions go to
http://192.168.0.100/phpmyadmin/
I get a 404 Not Found error.
View 3 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
Feb 17, 2011
I need to install LAMP server in Debian 6. But like Ubuntu there is no option to install Lamp Server
View 7 Replies
View Related
Jan 21, 2011
Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
View 1 Replies
View Related
Jun 24, 2015
I installed LaMp 2 days ago. First everything works; But until yesterday, I can't start anymore mysql server : it failed each time.
When I look at the status :
Code: Select allsystemctl status mysql
Failed to get D-Bus connection: Erreur inconnue -1
It's like it can't generate mysqld.sock
Code: Select all/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
I keep reading man and trying to find something I didn't configure correctly, but I can't find nothing.
View 1 Replies
View Related
Jul 30, 2011
I just installed LAMP server and it works. Anyway, I have problems with permissions to www/. I can't access it! Its located in /srv/www.
What do you suggest? I need to be able to freely add/modify/remove files under www/ as 'dagrevis' (not 'root').
View 1 Replies
View Related
Jun 8, 2011
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies
View Related
Apr 22, 2010
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
View 5 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
View 6 Replies
View Related
Mar 5, 2011
I need to create a sandbox environment on my LAMP server for PHP/MySql development. Anyone who could point me in the right direction or share their insight?
View 1 Replies
View Related
Nov 3, 2010
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies
View Related
Mar 10, 2011
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies
View Related
Feb 22, 2011
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies
View Related
Mar 20, 2011
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
View 14 Replies
View Related
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Jun 5, 2011
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies
View Related
Aug 17, 2011
I work for an organization with a few hundred employees. We need a very simple CMS for posting basic organizational documentation such has step-by-step instructions, as well as pdf and MS Office documents.We would prefer something that would organize content hierarchically, so we can structure the info into departments and functional areas. A MySQL or similar database is preferred, but flat file is okay as long as it does not limit content/structure too much.We would probably have about 15 to 20 content authors/editors. No workflow, authentication (except authors/editors) or secure content areas are required.
The only limitation would be that the content could only be accessed from a particular range of IPs. (I assume that would be set in Apache.)
View 1 Replies
View Related
Jun 16, 2011
I plan to host a Server. I want to know which is the best for Visualization.
Cent OS = > Xen
VMware = > open source.
i need to host a intranet in my company. they r going use java web based.which way is the best solution improve the I/0 request speed.
View 4 Replies
View Related
Feb 5, 2010
I've been messing around for a few days now trying to figure out what is going on and I feel like I'm making a stupid mistake. Essentially I'm trying to build a LAMP server (PHP) on my Mac Mini using VMWare Fusion 3 using Linux Server 9.10. To start, it's not going well at all. Once I install the LAMP portion after calling it with root permissions, I have no UI. Personally, I need a UI. Am I not understanding this? I figured once I install the LAMP packages and restart the server, there would be a user interface but nothing...
[URL]
View 2 Replies
View Related
Aug 20, 2010
I was using an email server from Icewarp, Merak Mail server V8.0.3 with a keygen for total full free use... I liked this server package... as everything is in there I need and it is controllable from a single window. Now I am planning to move to Linux... They have a Linux version, but not stable and expensive. Is there any thing almost free/less expensive (Specially they need yearly payment for upgrade of even the anti virus and anti spam)?
I need a almost same thing (except of the ftp and VoIP) like Merak (because that I really liked for ease of administration) in Linux? Like a Qmail with real strong Anti Virus and Anti Spam, with unlimited domain and user+autoresponder, mailing list, etc all but controllable from one single GUI?
View 1 Replies
View Related
Feb 19, 2010
I am using Ubuntu on a Windows network.
One of the computers have apache server (working), it has 192.168.1.6 IP, and the name of the computer on the network is "servidor"
I can't access from ubuntu, if I type http://servidor or 192.168.1.6, it goes to [URL], but I can access shared folders, just the host intranet server I can't
I have vmware with windows xp, and I can access http://servidor from there, but not from Firefox in Ubuntu.
View 4 Replies
View Related
May 12, 2011
what is the best configuration in httpd.conf to set up an intranet with Apache on Windows server?
View 1 Replies
View Related
Apr 13, 2010
We have one squid proxy server running on CentOS 5.3 64 bit with Squid 2.6. it works well for me.
but my problem/question is :
Is it possible to skip proxy for all Internet addresses? and only allow proxy if clients are accessing external addresses?
right now users have to explicitly say in the browsers .. BYPASS PROXY SERVER for local addresses after check the use proxy server
and address has to be mentioned. most users are non technical so they don't use this option or put wrong setting in bypass proxy option
View 2 Replies
View Related
May 14, 2010
Both server (web01), in DMZ, and client (app01), intranet, are Linux OEL5.5.
A few hints follows:
1- I ssh to web01, in DMZ, from a intranet machine on my desktop, export my DISPLAY, and try to bring up xclock; nothing happens.
2- traceroute from web01 to app01 fails.
3- NFS mount from web01, nfs server, to nfs client, app01, fails.
How should my network configuration on web01 or app01 be to make this NFS mount from web01 to app01 work?Each server has 4 NICs, I've only used eth0.
View 2 Replies
View Related
Aug 10, 2011
i have qmail toaster installed on centos5.6 , i want to divert my local intranet mail to my gmail account,i am using thunderbird as email client
View 9 Replies
View Related
