I have an old laptop I am trying to upgrade the Ubuntu version on. It is an HP Pavilion N3110. System specifications:
433 MHz Intel Celeron Processor
256 MB SDRAM
20 GB hard disk drive
24x IDE CD-ROM drive (CD-224E)
1.44MB floppy disk drive
[Code]...
I have an ubuntu server with a printer plugged to it through USB. I used to set the server ip on the Printing panel to print remotelly to it, but it doesn't work anymore since I upgraded to karmic. I can see the printer in the printer panel, and I can even print a test page through the panel, but I can't print from any other application. When I come to the printing screen, the printer has the message retrieving information from printer and I can't print. I guess the cups server is working well as I can print the test page, and I used to print with hardy, looks like if the changes made in the printing panel don't have any effect on the system.
View 1 Replies View RelatedThe installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536.
default connected 2048x1536+0+0 0mm x 0mm
[code]....
I had a wubi install- but it only let me dedicate 60 GB. I quickly ran out of that available space and decided I'd better try one of those tools to move my stuff on a partition of it's own.
I just used LVPM to transfer Wubi to the HDD, and.. it worked. Almost.
All I had to do was edit my grub file. I did that in Wubi, opened the menu.lst file with gksudo and added this just before windows: (I want Ubuntu to be first on the list, ofc)
Code:
# This is a divider, added to separate the menu items below from the Debian
# ones.
# title Other operating systems:
# root
## Added By Human Being
code....
(Please tell me if anything up there isn't needed, is wrong, or if I left something out..)Now it makes me press "S" before I can see the login screen at boot-up.
I want the quickest boot possible for Ubuntu, with a way for us to use Windows if needed.
It's looking for an Ubuntu 10.10 AMD64 CD, and I have the 10.10 Alternate AMD64 DVD.. and that message doesn't respond at all... I can press "S", and then it goes to the login screen, all works fine. I can update, I looked to see if the check-box for a CD upgrade was checked, but it wasn't.. I ticked the box (just for science), put in the alt-disk, and.... again it waited forever.. So that must be the wrong CD. Unticked it.. Also I just updated this morning fine. Still, that 'Press "S" to skip' at boot up is annoying
Do I have to download the standard Ubuntu 10.10 AMD64 ISO again.. (before it kept freezing), or is that futile.. I mean, all it's going to do is downgrade, (if it does anything..) right?
I upgraded my system today from Kubuntu 10.10 (or whatever the last full release was) to 11.04 using the automated web process. I know, I know, I should have tested off a live cd or a thumb drive, foolish mistake. On upgrade the video card works, and it boots fine... but I have no keyboard and mouse. I checked the forums and realized that maybe it was a problem with the brand of keyboard and mouse I was using. so I've tried four manufacturers (even tried switching between wired and bluetooth) to no avail.I've also tried starting in recovery mode, but the problem persists.
To be specific, my bios sees the hardware just fine, and I'm able to hold down shift and pull up the selection options pre-OS, and select which one to run... and I can see the red optical light on the mouse no problem, so it's not a defect of either the motherboard or the input devices themselves. However, once in the OS, in recovery mode, or anything else, I'm left without a keyboard or mouse. As my system only has USB ports and not PS2, I can't check a hardware spec beyond what I've tried.Also, it doesn't work if I select the "boot into an older version of linux" which is odd.Can someone make a recommendation? Is there a way to get a liveboot cd of the previous version of Kubuntu that worked?
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
I have 10.04 installed and Update Manager has worked fine for months, until about 2 weeks ago. When I ask Update Manager to update its indexes, I get this error message returned almost immediately
"Method http has died unexpectedly!
Sub-process http returned an error code (127)
Method http has died unexpectedly!
Sub-process http returned an error code (127)
The internet connection is working fine on this machine. I have another 10.04 machine sitting right next to the problem computer, and Update Manager works fine on that machine. I verified that all settings are the same between the 2 machines in these areas
1. All Update Manager SETTINGS (including SOFTWARE SOURCES)
2. System -> Preferences -> NETWORK PROXY (which is a Direct Internet Connection)
3. System -> Preferences -> NETWORK CONNECTION
It appears to me that the connection to Ubuntu repositories is failing but I can't find anything different between the 2 machines.
In Installed Fedora and the network did not mount or establish a connection. I installed and uninstalled over the last three days, ClearOS, Ubuntu, OpenSUSE all packages installed the network with any issues. I am looking at the best solution for Kannel/Mbuni for MMSC and WAP services.I want to build our own system -Grass Roots andlearn and grow from there.I am right now recuseing the network connection(selected) from the bootdisk ISO and rebooting the system. The network connection Fail again. NetworkManger has - "This Service is Dead"I am a newbie with Linux, I have some on-hands and I am learning as I go. Lots of material to read and FAQ site, and this forum,
View 2 Replies View RelatedI have a small atom-based workstation.I used preupgrade to move from F10 to F11.The process seemed to go smoothly.I boot up and everything is working as I expect, except for yum update.
View 1 Replies View RelatedI have replaced Ubuntu 8.04 with a clean install of 9.10 In 8.04 I used to be able to print to my Canon Pixma ip1500 using the resources at [URL] In 9.10 I can no longer get my Canon Pixma ip1500 printer to work because on the one hand: Open pstocanonbj_3.3-1.1_i386.deb with GDebi Package Installer
Code:
Error: Dependency is not satisfiable: libcupsys2-gnutls10 (>= 1.1.23-1) and on the other hand:
In http://packages.debian.org/etch/libcupsys2
download libcupsys2-gnutls10
"Download Page for libcupsys2_1.2.7-4+etch9_i386.deb on Intel x86 machines"
Open with GDebi
Code:
Error: Breaks exisiting package 'libcups2' conflict: libcupsys2 (< 1.3.7-6)
I am running Mandriva Linux 2010.
It works beautifully.
Now I am running into problems with some websites; they complain the Adobe Flash Player is old.
It suggested downloading.
I obliged to them and downloaded. Everything worked fine.
However, those website still complains about an old Adobe Flash Player.
I just followed the instructions and installed it. Please read the following:
I am doing an online VMware certification course as a part of my education. I can't do it because of this prroblem. It complains about an old Flash Player.
I'm installing Fedora 11 x86_64 from the DVD iso. The SHA256 checksum was fine, and the media checked out fine just prior to install. The F11 install seems to go perfectly and I get all the way through the installation. However, on reboot, I get this message, "No bootable device -- insert boot disk and press any key"!!!!I'm installing to an old Intel 975XBX2 motherboard with 4GB of memory, which I have used successfully, flawlessly for every single Fedora install since F6. I've only been using one hard drive with a FAT32 partition, and an NTFS partition for Windows XP, the remainder of the disk is Fedora.I've probably tried this F11 install about 8 or 9 times already with no success; actually, the installation seems to go perfectly, but I just cannot boot the PC. I think there's something wrong with GRUB being written into the MBR of the hard drive, because I cannot boot DOS on that FAT32 partition, I can't boot into the NTFS partition which contains XP, nor can I boot into F11.Anyone else having problems with the boot? I've been a long time Fedora user and was counting on the reliability of F11: Wondering if that Anaconda re-write had anything to do with all of these problems?
View 14 Replies View RelatedI am unable to install fedora 10 (both Live_CD and DVD) as the screen freezes at the Login page in LIVE_CD and in the welcome page in the DVD installation. Anyway i have narrowed down the issue by goin via the forum. Issue is with the graphics card only. I have tried the following steps to get around this issue,try removing "rhgb" from the bootline - not worked xdriver=vesa - Worked, i got via the Login page in Live_CD but the desktop is not completely visible and its freezes. vga=ask - not worked as i dont know which option to choose try removing "rhgb" from the bootline I am using 845GV motherboard, onboard Graphics card.
View 1 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
I have a Compaq Evo N610c that was running 9.10. I was reluctant to upgrade to 10.04 since everything was working like a clock. But, alas, the "newer is better" bug bit me and I just HAD to try out 10.04. So, I installed it in a dual boot mode, keeping my 9.10 in tact. I'm glad I did! I use an Enterasys Roamabout CSIBD-AA-128 wireless lan card to connect to my network. I use WEP 128-bit encryption for the network. I connect without issue in 9.10.
In 10.04, I am unable to connect to the network. I am sure that the card is recognized, as the system "sees" my network and tries to connect. I am asked for "wireless network authentication required". I have tried both passphrase (WEP 40/128-bit key) and WEP 128-bit passphrase (network name 5rueckls). When I enter either, the computer looks like it is trying to connect, but never gets there. Settings under the "Editing Auto 5rueckls" include Mode: Infrastructure, MTU: Automatic, IPv4 Settings Method: Automatic, IPv6 Settings Method: Automatic, Wireless security: WEP 40/128 (key entered), WEP Index 1, Authentication: Open System. Available to all users is "ticked". I am very new to the whole Linux/Ubuntu environment, but have made alot of progress! I can follow direction very nicely.
Logitech webcam:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I'm currently learning how to program in PHP i have recently installed LAMP server and apache2 and MySQL, i have run a bunch of commands, so i can really remember them all..the ones i can remember is:
Code:
apache2 php5-mysql libapache2-mod-php5 mysql-server
sudo tasksel install lamp-server
sudo apt-get install apache2
and when i entered url in my browser bar i got a screen saying it worked but no content has been added.
I tried put my test file (called index.php) into /var/www/ still not worked renamed it to index.html still not worked.tried url and with index.html wasn't working.
i woke up today to try find out what was wrong. BUT NOW I CAN'T ENTER url.I got a "server not found" screen like when you enter an incorrect adress
i tried to restart apache using:
Code:
sudo /etc/init.d/apache2 restart
but get's
Quote:
* Restarting web server apache2 apache2: Syntax error on line 233 of /etc/apache2/apache2.conf: Syntax error on line 12 of /etc/apache2/conf.d/index.php: Expected </?php> but saw </div>
[fail].
What happened? I turn on Ubuntu and plug in my USB key. It refuses to do anything other than make a few loading noises.
View 5 Replies View RelatedI ran 11.1 for about a year and had only a few issues; but for some (stupid?) reason, decided to go to 11.2.
Now my hibernate does not work (it worked almost flawlessly on 11.1. Both from shutdown options and when closing the lid.
It seems to disconnect the ethernet, but then just reconnects and resumes normal operation.
This is a IBM T42 laptop. It also does not hibernate when I close the lid, which also worked fine on 11.1.
I can't leave this thing running all the time and I don't want to do a full shutdown every time I stop using it.
I've installed all the updates and upgrades.
I am a new user of Slackware 13.37 (KDE) on my laptop. Unfortunately, suspend to ram is not working properly. It worked the very first time I tried it, but has failed since. The computer suspend properly (light turns orange) but when I click any button it restarts computer and recovers journals.
View 2 Replies View RelatedI recently installed openSUSE 11.4 and the wi - fi conection doesn't work, but with Ubuntu worked without problem. What can I do to get wi-fi connection working on this distribution again?
View 9 Replies View Related[10.04]-Gobi Loader Fails on 10.04 RC, Worked on 9.10? I was using a program called "Gobi Loader" to manually setup my Qualcomm 9212 3g internal USB modem on my Verizon Wireless Gateway LT2016U NetBook. Gobi Loader program loads the modem's firmware so it is usable by Ubuntu OS. This worked fine on Ubuntu 9.10, but on Ubuntu 10.04 RC when I run Gobi Loader it just hangs. I've Googled for hours and have not found a solution to this issue. For me it is a big issue as in Ubuntu 10.04, my 3g access is not working. (I'm paying Verizon Wireless $60 dollars a month for 3g access my Ubuntu 10.04 can't use.)
The only option I see now is to install Windows(R) XP, then reinstall Ubuntu 10.04 and dual boot. I would have to boot into Windows(R) XP first, the soft reset and boot into Ubuntu 10.04. (but this is not something I wish to do) This Qualcomm 9212 3g internal USB modem is quite popular in NetBooks, and I can't be the only person in the universe who is using Ubuntu 10.04 on it so there must be some way to make this 3g modem work on Ubuntu 10.04?
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
I installed Ubuntu 11.04 and then I installed WICD using Synaptic and then uninstalled Network Manager. WICD worked fine until I rebooted. Then I could not connect at all. Wicd displayed the wireless lans and even authenticated OK. But wicd was not able to obtain an IP address.
View 1 Replies View RelatedDoes anyone know how I might enable my boot to Ubuntu again? Here is what I have found but do not know what I should fool with. I thought I would ask for help before I screw it up worse.I have Ubuntu 10.04.1 installed inside W7 effectivly creating a dual boot system. It's been running fine for about 2 months. Now when I try to boot into Ubuntu by selecting the boot Ubuntu option in the Windows Boot Manager, it fails and goes back to Windows Boot Manager. There are 2 screens that flash by in about 1/2 a second when enter is pressed after the ubuntu selection and before it reverts again to the Boot Manager. With the help of a camera and good timing, I captured a picture of the text displayed.
The first screen displays;Try (hd0, 0) NTFS5 No wubildrTry (hd0, 1) NTFS5 _The second screen displays;error unknown command loadfonterror file not foundIn the windows C: drive I find the 2 files; C:wubildr created 12/19/10 size 87kbC:wubildr.mbr created 11/7/10 size 8kb (created the date I installed Ubuntu)In C:ubuntuwinboot... I find the same two files with the same size and creation dates as in the windows c: drive. In addition I also find a file, C:ubuntuwinboot.wubuildr.cfg, created 11/7/10, size 2kb, described as a MS Office Outlook configuration file.There are also a files;C:ubuntudisksootgrub but the grub directory is empty. The grub directory was created 11/7/10. Should there be a file in the grub directory?
I have a bcm4312 wireless network adapter that worked in F11 after following this guide: [URL]. Now, the wireless adapter won't work.
View 14 Replies View RelatedF12 DVD upgrade from F11 worked flawlessly but, what happened to my Freecell game??
View 2 Replies View Relatedon fc7-10 the sound on my laptop worked, in fc11 it is broken. just did a yum update How to get sound up and going?
[Code]...
I used to run an application named DBabble (client) through Wine back when I used 11.1. Then, the version of Dbabble client was 2.2h -I still have the exe-. Now I tried this same version on 11.3 with Wine, and this is what I got:
ImageBam - Fast, Free Image Hosting and Photo Sharing
Latest version of the client is 2.9i, and this one seems to work fine, but the server I want to connect needs client 2.2h. I thought it was the Wine version, but a friend tried the exe in a system with 11.1 and latest Wine, and it worked for him.
So there's probably a change in 11.3 that broke this app under Wine. Is there a solution or workaround for this on 11.3?