Ubuntu Installation :: Way To Get Liveboot Cd Of Previous Version Of Kubuntu That Worked?
Apr 29, 2011
I upgraded my system today from Kubuntu 10.10 (or whatever the last full release was) to 11.04 using the automated web process. I know, I know, I should have tested off a live cd or a thumb drive, foolish mistake. On upgrade the video card works, and it boots fine... but I have no keyboard and mouse. I checked the forums and realized that maybe it was a problem with the brand of keyboard and mouse I was using. so I've tried four manufacturers (even tried switching between wired and bluetooth) to no avail.I've also tried starting in recovery mode, but the problem persists.
To be specific, my bios sees the hardware just fine, and I'm able to hold down shift and pull up the selection options pre-OS, and select which one to run... and I can see the red optical light on the mouse no problem, so it's not a defect of either the motherboard or the input devices themselves. However, once in the OS, in recovery mode, or anything else, I'm left without a keyboard or mouse. As my system only has USB ports and not PS2, I can't check a hardware spec beyond what I've tried.Also, it doesn't work if I select the "boot into an older version of linux" which is odd.Can someone make a recommendation? Is there a way to get a liveboot cd of the previous version of Kubuntu that worked?
Since m computer updated FF to 3.6.x FF runs really slowly if a page with java/js or flash opens. It gets so slow I can hardly use it at all. This is a known problem that many people are complaining about, as seen here:
[URL]
I would like to depreciate back to 3.5.8 or 3.5.9 until this issue is resolved, as currently this is preventing me from working the internet on my websites, etc. How can I get a previous version of Firefox to install? Using Jaunty 9.04
I am now using ubuntu 10.10. I am going to install ubuntu 11.04 on April 28 (after it is released). I want to preserve: 1) the list of extra programs installed by me on ubuntu 10.10 (I want to install the same programs in 11.04 also) 2) program settings
My questions: 1) From synaptic package manager menu: File -> Save Markings (save full state, not only changes) saves in a text file the list of programs installed on my system. I used that file to install the same programs in several computers running ubuntu 10.10. Is there a way to use that list in 11.04 also.
2) Copying the directory ~/.mozilla preserves all settings of firefox from previous installation. Like that what files should be copied for gnome applications (gnome-panel, nautilus, etc.)
I upgraded from 10.10 to 11.04. on boot up I sometimes get only the purple screen freeze and sometimes I actually get to the grub menu. I select the generic kernel and get the black screen freeze. same if I do the recovery mode. but if I get lucky on a reboot and can get the grub menu up again, I select previous linux version and then select 2.6.35 generic and it will boot into 11.04 with Unity. So, how can I get this thing to boot normal with the correct kernel version? I am fairly new to this linux world and don't want to have to go back to windows if I can help it.
Is there a relatively easy way to restore the "previous" version of an RPM in FC10? The last set of updates killed my GUI and I'd very much like to get back to whatever I had before I got updated to:
I recently got my Dell XPS 17 and configured it to do dual boot into Win 7 and Maverick. Apparently, Maverick does not play nice with the newer hardware in this laptop so I decided to upgrade to Natty Beta. All has gone fine except for one little thing. When bootting Grub shows my WIn7 and Natty options but it also shows an option to use the older ubuntu version. It does not actually work as it stops receiving input at the user selection screen. I can't remove the image as it does not show up in synpatic nor is the package found when using the apt-get remove [linux image version] command.
I searched the forums and found that this guy: http://ubuntuforums.org/archive/inde...t-1489362.html
was having the exact same problem as me and had tried exactly the same things as I have, and I still don't know how to remove those old files. I don't even know where these config files could be so that I can manually go in and remove them. I could live with the option in the Grub but I'm kind of a tidy freak and it annoys me to have a non-functional booting option taking up space.
Is it correct for me to think that a clean reinstall of natty would purge that ghost from the Grub? Also, how easy is this process and can the process mess up the MBR and not be able to do the dual-boot?
Every time kubuntu updates its headers/boot image I get another version on disk in /boot. These also show up in menu choices when I boot. I currently have 7 or 8 versions and would like to get down to three or four.
In the past I just deleted the files of related versions from /boot but is this the preferred method? Is there a better/safer way to get rid of old kernels?
I'm using Ubuntu 10.04 on my computer, I asked a couple months ago here if my PC would run it and it does well, but I believe that not as well as I want to, mainly because of my computer. Right now I have the following:
RAM: 433 MB AMD Sempron, 1800 MHz 3000+ HD 120 Gb
So I believe that maybe if I change my Ubuntu version to, lets say, 9.10 it will work a little better, because right now the PC have a lot of lag and some other troubles when working with PDF and the GIMP, etc. and I think its mainly because of the low memory. So, what do you think? Should I change my PC to 9.10 or some other previous version of Ubuntu?
My latest update (this am) included a chromium update. Chromium now will not do much, gets hung up on most searches, can't access gmail and a few other misc strange things so I thought I would try to go back a version, since it is in .archives. I deleted the current version 5.0.393, and trying installing the older version, and it said it wouldn't cause a newer update is available. I tried reinstalling the newer version again, with no luck.
I did an update to Firefox 3.6.16 and now it crashes each time it loads the homepage. I don't want to use Firefox 4 yet because some of the addons are still incompatible. So, how do I get the previous version of Firefox 3.6.15 for Ubuntu 10.10?
upgraded to Banshee 1.9 and now I can't get my podcasts to play on my iPod Classic. I've purged banshee, searched on-line how to download previous versions but I just can't figure it out.
I have ubuntu 10.10 installed and running boxee.When flash updated to 10.2 the other day flash videos stopped working correctly.Is there somewhere I can get the previous version of flashplugin-installer and replace the 10.2 version?
I'm using F11 and I've downloaded and installed kernel 2.6.30.4-25.fc11.x86_64 from koji. Since I'm dumb.... I've installed with rpm -Uvh kernel* so now I've loose the latest stable fedora kernel... I've tried to manually download kernel but when I try to install it complains because it's older then the current installed. How can I restore to kernel 2.6.29?
I am running Fedora 12 and I am trying to install the DHCP. well I use the yum -y install dhcp command and this is what I get "Transaction Check Error: file /user/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686 file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-18.P1.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686"
I am a newbie at this and I tried the yum remove, yum update and the yum update says dhcp packages available but not installed.
I just updated to the new Ubuntu version 11.04. The new user interface is innovative, but I can't work effective with it. Is there a way to reset the UI (especially the gnome panel) to the the way it was in earlier versions??
This is to request assistance or information as to why the evolution application will not accept the evolution-backup-tar.gz file from a previous version.
Situation: I upgraded by way of a fresh install from openSuSE 11.2 to 11.3 (GNOME desktop). Before upgrading, I produced the above mentioned backup file so that I could import all the mail, addresses etc. into the new application.
Result: it does not work. The process starts up seemingly normal but then simply sits there forever with the message "evolution shuts down" - but it does'nt. I have to kill it to stop it.
I am looking forward to a resolution since it would be a real pity if I lost the mail history.
Just wondering if anyone would be kind enough to point me to a link for the adobe flash plugin version previous to version 10.1 for i386. I don't have anything in /var/cache/yum/i386/12/adobe-linux-i386/packages/ because I think I cleared yum's cache. I'm experiencing major regressions with flash 10.1, stuttering videos and some videos no longer play. Version 10.1 is a major disaster for adobe. It really is appalling for an update. Also, if anyone else is experiencing flash version 10.1 issues, please share and if anyone is considering upgrading to it, my advice is keep the old one handy, you will likely need it.
I know this is a very silly post, however I just can't find the link to download a previous version of Open SUSE.if someone could direct me to a page where I can download the Open SUSE 10.2
I was trying to do a live boot of puppy on my new laptop.I installed puppy to a flashdrive via unetboot in. i did the normal BIOS screen but up but then it said as puppy was trying to boot up "pup-431.sfs not found"but when i booted up windows and i was able to find the file on my flashdrive.
Having trouble figuring this out. I've got a package that I've installed from out-of-repos and Kubuntu feels the need to "upgrade" this package to a version that I do not want to use. I've found out how to do this in Ubuntu, but not in Kubuntu. A commandline solution would be fine, although I've googled it and not come up with any working results.
I am almost brand new user of Ubuntu 9.10 loaded using Wubi. After an update I can no longer boot from the highest version (-20-generic), but have to start from a previous version (-14-generic). How do I clean up the boot image/configure grub (v 1.97 beta which I believe is Grub 2)?
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536. default connected 2048x1536+0+0 0mm x 0mm
