I installed Ubuntu 11.04 and then I installed WICD using Synaptic and then uninstalled Network Manager. WICD worked fine until I rebooted. Then I could not connect at all. Wicd displayed the wireless lans and even authenticated OK. But wicd was not able to obtain an IP address.
View 1 Replies
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
I have just installed Debian 5 and KDE. All works fine. I wanted to add in a 200GB IDE drive and all worked fine except when I use Konqueror to look at the drive contents it is unmounted. I can mount it o.k., but my question is:
Where do I put the mount command so that the drive mounts at startup? Do I have to set permissions as well and if so can i do this so that the drive is r/w accessible to me as a non root user? My system is just a desktop machine running Openoffice and Internet access.
I have a Z_Star webcam, which used to work perfectly well with OpenSUSE 11.3. At some time after updating to 11.4 (Tumbleweed, in fact) the device wasn't recognized any longer. Skype and Kopete both show that I have no available webcam device. The lsusb command (see below) shows the camera is there. What am I missing?
Code:
> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
In Installed Fedora and the network did not mount or establish a connection. I installed and uninstalled over the last three days, ClearOS, Ubuntu, OpenSUSE all packages installed the network with any issues. I am looking at the best solution for Kannel/Mbuni for MMSC and WAP services.I want to build our own system -Grass Roots andlearn and grow from there.I am right now recuseing the network connection(selected) from the bootdisk ISO and rebooting the system. The network connection Fail again. NetworkManger has - "This Service is Dead"I am a newbie with Linux, I have some on-hands and I am learning as I go. Lots of material to read and FAQ site, and this forum,
View 2 Replies View RelatedI am running Mandriva Linux 2010.
It works beautifully.
Now I am running into problems with some websites; they complain the Adobe Flash Player is old.
It suggested downloading.
I obliged to them and downloaded. Everything worked fine.
However, those website still complains about an old Adobe Flash Player.
I just followed the instructions and installed it. Please read the following:
I am doing an online VMware certification course as a part of my education. I can't do it because of this prroblem. It complains about an old Flash Player.
I have a whitebox server with three network adapters, two gigabit adapters using the intel 82573V chips, and an intel pro/100 adapter based on the 82562 chip. These are embedded on an MSI motherboard. None are passing traffic.I initially booted the box using a Knoppix 5.0.1 CD, and the NICs worked fine. When I installed CentOS 5.4, no joy.Interestingly, Intel recommends the e1000e driver (which I am using), but the Knoppix CD used the e1000 driver. Anyway, I pulled an updated e1000e driver from elrepo,installed it, and verified that it was in use with 'ethtool --driver eth2', and the correct driver/version was displayed.
Symptoms are no traffic passes, rx/tx packet counts in ifconfig are both 0 (no errors, either). Routing table looks fine; three routes: one for 169.x.x.x, 172.16.x.x (my subnet), and one for 0.0.0.0, all destined for eth2, and all up. When I ping 127.0.0.1, and the local adapter address, I get good replies. As soon as I ping a remote host on my subnet, I get 'Destination host unreachable'. Now, at one point, I actually got it to work. I applied a small patch from Intel to change a value in the EEPROM, rebooted as instructed, and the adapter came up and passed traffic. I did a 'yum update' to update my packages, and shortly thereafter, everything stopped working again.
I updated my laptop to 10.04 earlier today and it worked fine but it was being a bit glitchy so i rebooted my laptop and it worked fine until it showed an error saying "cannot reserve MMIO region".
View 9 Replies View RelatedI have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
I have a Natty installation that I just did yesterday on my personal PC. I am not home currently, but I can access my router (uses DD-WRT), and my Media Center Machine (Ubuntu 10.10) via SSH. For some reason, when I rebooted my router via SSH my personal PC (with Natty) did not renew an IP.Is there a way I can use magic packets or any other method from my other Ubuntu machine that I have remote access to, to force that other machine to renew it's IP?
View 1 Replies View RelatedI installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
When there is a power failure at my university for about 30 minute, my computer stays up because of a UPS, but the switch it is connected to via ethernet is reset. After this, my machine loses network connectivity until I manually select the network using nm-applet.
In System -> Preferences -> Network Connections, the network has the "Connect automatically" box checked.
However, in /etc/NetworkManager/nm-system-settings.conf, there is a line that says:
Code:
no-auto-default=00:30:48:b0:11:07,
and that is the MAC address of the ethernet card.
I'm running Ubuntu jaunty.
I have been running Meerkat in its various forms for the last few weeks. Wireless connection has not been a problem at all. I rebooted about 15 mins ago and on restarting the wireless connection will not connect. I checked to see what the problem was and clicked on Edit Connections and on the wireless tab.
My wireless is set to auto and its name is SKY 24550. I now have 2 entries in the same name and the one that is trying to connect is asking for wep 128 bit security details to be entered. My connection used WPA&WPA2 personal.
Ok, I thought I'll delete the new one (with the different security setting) and try again.
No good, it still asks for the same security details.
So I go back into edit connections and the new one is back again! I can't get rid of it, and while it's there the one that should connect isn't getting the chance.
Fortunately ethernet is working ok and I also have a Natty install which also connects ok through the old wireless connection, but not in Maverick.
Title : AGK(Auto Gordian Knot)
Auto Gordian Knot]
*****************
input file=C:*MEAD*AAMOV4.avi
external file=C:*MEAD*AAMOV4.srt
output file=C:MEADAAMOV4_agk.av
[Code]....
The "AAMOV4.avi" file and the "AAMOV4.srt" file worked fine in "MEDIA PLAYER".
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies View Related[10.04]-Gobi Loader Fails on 10.04 RC, Worked on 9.10? I was using a program called "Gobi Loader" to manually setup my Qualcomm 9212 3g internal USB modem on my Verizon Wireless Gateway LT2016U NetBook. Gobi Loader program loads the modem's firmware so it is usable by Ubuntu OS. This worked fine on Ubuntu 9.10, but on Ubuntu 10.04 RC when I run Gobi Loader it just hangs. I've Googled for hours and have not found a solution to this issue. For me it is a big issue as in Ubuntu 10.04, my 3g access is not working. (I'm paying Verizon Wireless $60 dollars a month for 3g access my Ubuntu 10.04 can't use.)
The only option I see now is to install Windows(R) XP, then reinstall Ubuntu 10.04 and dual boot. I would have to boot into Windows(R) XP first, the soft reset and boot into Ubuntu 10.04. (but this is not something I wish to do) This Qualcomm 9212 3g internal USB modem is quite popular in NetBooks, and I can't be the only person in the universe who is using Ubuntu 10.04 on it so there must be some way to make this 3g modem work on Ubuntu 10.04?
I have a bcm4312 wireless network adapter that worked in F11 after following this guide: [URL]. Now, the wireless adapter won't work.
View 14 Replies View RelatedI had 10.10, and all was well. Then I installed natty, and WiFi worked for a while, then stopped working. I later went back to 10.10, and WiFi still isn't working. The WiFi icon in the top bar looks like it's scanning. But it just keeps on scanning, continuously. Then it asks me for the password, so it obviously connects to something if it knows the network needs a password.
But here's the weird thing, my router also creates a BT Open Network, which I think is some pay service that BT offer, apparently through anyone's wifi since it's not password protected. I can connect to that. But not the actual network that leads to the internet. This happened a while back, and of course I can't install any updates on it because I can't get online. I am writing this from XP on the same computer, and XP can connect to the network no problem.
I have recently installed Ubuntu 11.04 on a Toshiba Satellite laptop that used to have Vista installed on it. I've been trying out various Linux live discs (eventually choosing Ubuntu) for over a year now, and whenever I've been on a live disc, the laptop has been able to connect wirelessly to the internet and browse the web. I have a NETGEAR router and I have always been given the option in the upper right to connect to NETGEAR. Tonight, when I installed Ubuntu, I chose to wipe the hard drive completely (I backed up stuff already), and it asked me if I had an internet connection. I tried to connect to NETGEAR but it wouldn't work. This made me a little suspicious, but I chugged along with the installation anyway. Now that it's fully installed, when I go up to see the list of wireless connections, it doesn't give me any options; everything is greyed out. What do I do now? I just wiped an entire hard drive and can't use the internet.
View 1 Replies View Relatedmy wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
I'm not getting a response over on the Ubuntu WIreless Forum (which looks like it's getting slammed with questions), and weigh in on whether or not you believe I have a hardware failure on my hands? As I state in the post, I ran fine from the original installed version, 8.10, through 2 upgrades (to 9.04 and 9.10). Now none of them work (When the problems began I re-installed each of them in turn in order to test).
View 2 Replies View RelatedThat's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
I have an HP a670y desktop computer using the included wireless antenna (looks like a big Sorry game piece). I am running Ubuntu 10.04 x64 dual booted with Windows Vista x64. I haven't had internet for a while but just got it today and decided to do some updating in both Windows and Ubuntu. It had detected my router and I copied and pasted the WEP key then it asked for my password, but my keyboard wasn't connected so I clicked cancel for the password window and it connected anyway.
I opened the Synaptic package manager and started downloading some updates while I did some browsing on the internet. I had restarted my computer when the updates were done and it asked again for my WEP key. I copied and pasted just as I did before and entered my password and after it tried to connect it asked for my password again. I thought maybe the internet was down so I decided to boot up Windows and it connected right away. I wonder if one of my updates messed something up. Has anyone else had this happen?
I've been using Windows all my life (and still have to use it at work) but I made the big leap yesterday and installed Ubuntu on my personal machine (at last). With my "Windows-centric" mind, there are a million things that I still don't get, but I must say the community and forums look quite impressive and easy to access (kudos! ). I am testing this today!My current problem is with the wireless adapter. I have a Belkin N Wireless USB adapter (FSD8053v3) and Belkin, of course, doesn't make linux drivers. When I installed Ubuntu, it recognized it automatically and I could connect to my network, but navigation was very slow so I tried to install Belkin windows drivers using ndiswrapper. It worked immediately, and navigation was very fast. However after a reboot, I lost the connection, I can't even see any of the neighbouring networks.
View 9 Replies View RelatedI did an inplace upgrade on my Dell Latitude X1 from Fedora 14 to 15 using dist-sync as per instructions on the website. It was not entirely smooth but I believe all the packages are now present and correct. Initially, about half the packages were still on f14 and the machine barely booted. I booted single user (nothing else was possible) and persuaded yum to fetch & install the rest.I was using wicd on 14 to connect wirelessly and it "just worked". I used wicd because I found NetworkManager didn't work.
On upgrade to 15, wicd now fails, and NetworkManager still does.icd i get an authentication failure, though the pw is correct. The only clue in the logs I can see is that wicd complains of not finding python-iwscan, and doesn't seem happy in using dhclient. Of course p-iwscan isn't in Fedora. Is p-iwlib similar? For wlassistant onnect failed.NetworkManager is currently refusing to acknowledge the existence of wireless on the machine, though occasionally it has addmitted the possibility. Then however I can neither scan for an SSID nor enter one manually ** Using iwconfig and setting the key manually *appears* to connect to the AP, but dhclient won't get IP data for it (if I ask nicely, it appears to try but isn't transmitting anything)The wireless card is an Intel ipw2200 chipset built into the X1. The ethernet port is working ok now, using a Broadcom chip.
still stalling after all those months, everything is explained here
[URL]
the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers
my net worked HP printer will not print-broken pipe - this started after I had to switch off the printer at the mains in order to attend to a paper jam. Now it will not print apart from a test page. I am using Fedora 10 and the device info is "hp:/net/Officejet_Pro_L7500?ip=192.168.0.4"
View 5 Replies View RelatedBrand new to this world. Trying to figure out how to roll-back an app (Wicd). Specifically trying to do this: "edit /etc/apt/sources.list and added links to the karmic repositories for the universe group."
how do I find the karmic repositories links?
