OpenSUSE :: Windows App Which Worked In 11.1 Doesn't In 11.3
Nov 1, 2010
I used to run an application named DBabble (client) through Wine back when I used 11.1. Then, the version of Dbabble client was 2.2h -I still have the exe-. Now I tried this same version on 11.3 with Wine, and this is what I got:
ImageBam - Fast, Free Image Hosting and Photo Sharing
Latest version of the client is 2.9i, and this one seems to work fine, but the server I want to connect needs client 2.2h. I thought it was the Wine version, but a friend tried the exe in a system with 11.1 and latest Wine, and it worked for him.
So there's probably a change in 11.3 that broke this app under Wine. Is there a solution or workaround for this on 11.3?
View 4 Replies
ADVERTISEMENT
Jun 19, 2011
I did an inplace upgrade on my Dell Latitude X1 from Fedora 14 to 15 using dist-sync as per instructions on the website. It was not entirely smooth but I believe all the packages are now present and correct. Initially, about half the packages were still on f14 and the machine barely booted. I booted single user (nothing else was possible) and persuaded yum to fetch & install the rest.I was using wicd on 14 to connect wirelessly and it "just worked". I used wicd because I found NetworkManager didn't work.
On upgrade to 15, wicd now fails, and NetworkManager still does.icd i get an authentication failure, though the pw is correct. The only clue in the logs I can see is that wicd complains of not finding python-iwscan, and doesn't seem happy in using dhclient. Of course p-iwscan isn't in Fedora. Is p-iwlib similar? For wlassistant onnect failed.NetworkManager is currently refusing to acknowledge the existence of wireless on the machine, though occasionally it has addmitted the possibility. Then however I can neither scan for an SSID nor enter one manually ** Using iwconfig and setting the key manually *appears* to connect to the AP, but dhclient won't get IP data for it (if I ask nicely, it appears to try but isn't transmitting anything)The wireless card is an Intel ipw2200 chipset built into the X1. The ethernet port is working ok now, using a Broadcom chip.
View 5 Replies
View Related
Jul 9, 2011
my wireless network doesnt recognize that any network is around. The broadcom STA driver will not install and it says "Please have a look at the log file for details: /var/log/jockey.log" the jog file says
2011-07-09 21:21:33,921 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2011-07-09 21:21:33,987 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code].....
I'm on 11.04, im on a macbook 6,2 i7. The wifi worked when i booted from cd but now it doesnt work once i installed.
View 2 Replies
View Related
May 20, 2010
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
View 2 Replies
View Related
Nov 25, 2010
xfce mixer identifies my card (atiixp) and i put the volume to the max and make sure there is no mute, but now sound comes out from flash nor mp3's, nor assualt cube. they all worked in ubuntu with gnome. any ideas?
View 3 Replies
View Related
Jun 4, 2010
I ran 11.1 for about a year and had only a few issues; but for some (stupid?) reason, decided to go to 11.2.
Now my hibernate does not work (it worked almost flawlessly on 11.1. Both from shutdown options and when closing the lid.
It seems to disconnect the ethernet, but then just reconnects and resumes normal operation.
This is a IBM T42 laptop. It also does not hibernate when I close the lid, which also worked fine on 11.1.
I can't leave this thing running all the time and I don't want to do a full shutdown every time I stop using it.
I've installed all the updates and upgrades.
View 3 Replies
View Related
Mar 30, 2010
I have never been able to use the Screen Saver in the Desktop settings, as even clicking on a Screen Saver, crashes the whole Desktop Settings.Here is what I get:
Code:
Application: systemsettings (1.0)
KDE Platform Version: 4.4.1 (KDE 4.4.1) "release 228"
[code]...
View 9 Replies
View Related
Mar 24, 2011
I have a Z_Star webcam, which used to work perfectly well with OpenSUSE 11.3. At some time after updating to 11.4 (Tumbleweed, in fact) the device wasn't recognized any longer. Skype and Kopete both show that I have no available webcam device. The lsusb command (see below) shows the camera is there. What am I missing?
Code:
> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
View 9 Replies
View Related
Sep 10, 2011
I recently installed openSUSE 11.4 and the wi - fi conection doesn't work, but with Ubuntu worked without problem. What can I do to get wi-fi connection working on this distribution again?
View 9 Replies
View Related
May 21, 2011
In Installed Fedora and the network did not mount or establish a connection. I installed and uninstalled over the last three days, ClearOS, Ubuntu, OpenSUSE all packages installed the network with any issues. I am looking at the best solution for Kannel/Mbuni for MMSC and WAP services.I want to build our own system -Grass Roots andlearn and grow from there.I am right now recuseing the network connection(selected) from the bootdisk ISO and rebooting the system. The network connection Fail again. NetworkManger has - "This Service is Dead"I am a newbie with Linux, I have some on-hands and I am learning as I go. Lots of material to read and FAQ site, and this forum,
View 2 Replies
View Related
Sep 11, 2010
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
View 1 Replies
View Related
Jul 19, 2010
with 11.2 and now with 11.3 (using KDE4) i got two issues with emacs:
1) The emacs window doesn't properly snap to other windows. There is mostly a small gap inbetween.
2) When switching between buffers with C-x b the emacs window shrinks vertically from below!
View 1 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Jan 20, 2010
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
View 7 Replies
View Related
Nov 16, 2010
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
[Code]...
View 9 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
May 7, 2010
Uploaded a bunch of photos to my Linux machine. (Windows got a bug, didn't want to infect any other windows machine, so I decided to "Scrub" files with Linux.) I'm now attempting to rip these files to dvd to upload onto other computers. Burning to DVD seems to be fine, but windows doesn't read any of the jpg's.
View 1 Replies
View Related
Apr 23, 2011
I have a hp pc that has a hard drive of 750 gb and a recovery hard drive of 31gb. I installed linux side by side with windows 7 for dual booting. Now I can't boot windows 7 anymore. During the installation of linux, I chose the advanced option so as to manually partition the drives for linux. On the available list of drives, I chose the 750gb and clicked on modify. I chose 150gb for the root "/" (on ext4) and 700mb for swap out of the 750gb and clicked install. After finishing the installation I restarted the pc and sought to test linux. The linux works fine but when i tried to start windows, I have a boot error. My pc doesn't seem to recognize windows anymore. It takes me straight to the HP recovery tool. I don't understand why. So I logged into ubuntu and check the disk utility and I discovered that I have a whooping 600gb unallocated space. It's like my whole windows is gone. This is what Disk Utilty shows
150gb ext4 | Free 600gb | RECOVERY 31GB NTFS | HP_TOOLS 108MB FAT
What can I do to recover my windows back?
View 3 Replies
View Related
Jan 3, 2011
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies
View Related
Aug 14, 2010
I have a Latitude X200 with Orinoco mini pci WLAN card. It worked perfectly on openSUSE 11.2 but I can't get wireless with 11.3. Wired works fine. I really have no idea how to troubleshoot this problem.
View 1 Replies
View Related
May 17, 2011
I am a new user of Slackware 13.37 (KDE) on my laptop. Unfortunately, suspend to ram is not working properly. It worked the very first time I tried it, but has failed since. The computer suspend properly (light turns orange) but when I click any button it restarts computer and recovers journals.
View 2 Replies
View Related
Nov 19, 2009
I have a bcm4312 wireless network adapter that worked in F11 after following this guide: [URL]. Now, the wireless adapter won't work.
View 14 Replies
View Related
Nov 24, 2009
F12 DVD upgrade from F11 worked flawlessly but, what happened to my Freecell game??
View 2 Replies
View Related
Nov 27, 2009
on fc7-10 the sound on my laptop worked, in fc11 it is broken. just did a yum update How to get sound up and going?
[Code]...
View 3 Replies
View Related
Aug 18, 2010
I have a Compaq Evo N610c that was running 9.10. I was reluctant to upgrade to 10.04 since everything was working like a clock. But, alas, the "newer is better" bug bit me and I just HAD to try out 10.04. So, I installed it in a dual boot mode, keeping my 9.10 in tact. I'm glad I did! I use an Enterasys Roamabout CSIBD-AA-128 wireless lan card to connect to my network. I use WEP 128-bit encryption for the network. I connect without issue in 9.10.
In 10.04, I am unable to connect to the network. I am sure that the card is recognized, as the system "sees" my network and tries to connect. I am asked for "wireless network authentication required". I have tried both passphrase (WEP 40/128-bit key) and WEP 128-bit passphrase (network name 5rueckls). When I enter either, the computer looks like it is trying to connect, but never gets there. Settings under the "Editing Auto 5rueckls" include Mode: Infrastructure, MTU: Automatic, IPv4 Settings Method: Automatic, IPv6 Settings Method: Automatic, Wireless security: WEP 40/128 (key entered), WEP Index 1, Authentication: Open System. Available to all users is "ticked". I am very new to the whole Linux/Ubuntu environment, but have made alot of progress! I can follow direction very nicely.
View 10 Replies
View Related
May 9, 2011
first i make one partiton ten format it add mount point and fire luksopen command and create secert file and enter this in crypttab but when i rebbot it showes scert file not found and partion remain unlocked
View 1 Replies
View Related
Apr 17, 2010
This is my first ever question. I'm a new-bee when it comes to configuring lenny at admin level, however with the help from the forum I was able to get my SONY Vaio VGN cs 190 configured successfully. I've gnome-core installed and here is my concern. I've Windows running on the same machine. I've a realtek sound card with Dolby SoundRoom. It works beautifully in Windows, as I've Dolby Control Center application to control the amount of bass I need. I also have a logitech Z-2300 2.1 Speaker system. Even though, it's a 2.1, it produces amazing sound. If I disable Dolby using Dolby Control Center, I fail to listen wonderful sounds whether I'm playing music or movies in Windows.
I'm not quite pleased with my experience of movies or music with Lenny as there is no Dolby Control Center application to control it. I've tried several suggestions, but none was fruitful. I've even tried Wine, but I'm not happy with it. If I can get this Dolby Control Center to work, I can completely take off Windows from my Laptop, which is my ideal goal.
View 1 Replies
View Related
Mar 9, 2010
Logitech webcam:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 5 Replies
View Related
Dec 14, 2010
I'm currently learning how to program in PHP i have recently installed LAMP server and apache2 and MySQL, i have run a bunch of commands, so i can really remember them all..the ones i can remember is:
Code:
apache2 php5-mysql libapache2-mod-php5 mysql-server
sudo tasksel install lamp-server
sudo apt-get install apache2
and when i entered url in my browser bar i got a screen saying it worked but no content has been added.
I tried put my test file (called index.php) into /var/www/ still not worked renamed it to index.html still not worked.tried url and with index.html wasn't working.
i woke up today to try find out what was wrong. BUT NOW I CAN'T ENTER url.I got a "server not found" screen like when you enter an incorrect adress
i tried to restart apache using:
Code:
sudo /etc/init.d/apache2 restart
but get's
Quote:
* Restarting web server apache2 apache2: Syntax error on line 233 of /etc/apache2/apache2.conf: Syntax error on line 12 of /etc/apache2/conf.d/index.php: Expected </?php> but saw </div>
[fail].
View 9 Replies
View Related
Jun 24, 2010
What happened? I turn on Ubuntu and plug in my USB key. It refuses to do anything other than make a few loading noises.
View 5 Replies
View Related
