I am a new user of Slackware 13.37 (KDE) on my laptop. Unfortunately, suspend to ram is not working properly. It worked the very first time I tried it, but has failed since. The computer suspend properly (light turns orange) but when I click any button it restarts computer and recovers journals.
View 2 Repliesmade a script with funtions, everything worked until 15 minutes ago, and i can't figure out what did go wrong.I think it has to do something with the 3 first rules of code... but for my opinion that should be fine (i used '777' just to be sure)
Code:
test_mount() {
$touch /current_mount
[code]...
Edit: This problem started when I accidentally used a 64-bit package to upgrade my 32-bit system. I upgraded Firefox, and now it won't start. I don't know where to find any relevant error messages. How do I figure out what's wrong? I downloaded the Firefox update from [URL] and installed it with the command
Code: su -c "upgradepkg mozilla-firefox-3.6.4-x86_64-1_slack13.0.txz" The result was as follows:
[Code]....
Does anyone know how I might enable my boot to Ubuntu again? Here is what I have found but do not know what I should fool with. I thought I would ask for help before I screw it up worse.I have Ubuntu 10.04.1 installed inside W7 effectivly creating a dual boot system. It's been running fine for about 2 months. Now when I try to boot into Ubuntu by selecting the boot Ubuntu option in the Windows Boot Manager, it fails and goes back to Windows Boot Manager. There are 2 screens that flash by in about 1/2 a second when enter is pressed after the ubuntu selection and before it reverts again to the Boot Manager. With the help of a camera and good timing, I captured a picture of the text displayed.
The first screen displays;Try (hd0, 0) NTFS5 No wubildrTry (hd0, 1) NTFS5 _The second screen displays;error unknown command loadfonterror file not foundIn the windows C: drive I find the 2 files; C:wubildr created 12/19/10 size 87kbC:wubildr.mbr created 11/7/10 size 8kb (created the date I installed Ubuntu)In C:ubuntuwinboot... I find the same two files with the same size and creation dates as in the windows c: drive. In addition I also find a file, C:ubuntuwinboot.wubuildr.cfg, created 11/7/10, size 2kb, described as a MS Office Outlook configuration file.There are also a files;C:ubuntudisksootgrub but the grub directory is empty. The grub directory was created 11/7/10. Should there be a file in the grub directory?
I wanted to remove apache and it worked but everytime it`s installed it comes with the old settings...and I want the default ones..I don`t know to manage an apache server but i`m learning! I tried these commands and not of then didn`t had any effect:
apt-get remove apache2
aptitude remove apache2
rm -rf /etc/apache2 , rm -rf /var/www
dpkg -P apache2
and of course ... --purge remove apache2
I had open office 3.2 installed and working perfectly then I ran yum update it installed a lot of packages
Open Office no longer worked
On the net I found (note it is truncated in th edisplay but if you put your pointer on it it disp[lays correctly
Code: [url]
It explains the problem, .. yum installs a package that is incompatible with OOo 3.2
Code:
It explained how to edit yum.conf so it will not do this and how to reinstall open office.
In Installed Fedora and the network did not mount or establish a connection. I installed and uninstalled over the last three days, ClearOS, Ubuntu, OpenSUSE all packages installed the network with any issues. I am looking at the best solution for Kannel/Mbuni for MMSC and WAP services.I want to build our own system -Grass Roots andlearn and grow from there.I am right now recuseing the network connection(selected) from the bootdisk ISO and rebooting the system. The network connection Fail again. NetworkManger has - "This Service is Dead"I am a newbie with Linux, I have some on-hands and I am learning as I go. Lots of material to read and FAQ site, and this forum,
View 2 Replies View RelatedI am running Mandriva Linux 2010.
It works beautifully.
Now I am running into problems with some websites; they complain the Adobe Flash Player is old.
It suggested downloading.
I obliged to them and downloaded. Everything worked fine.
However, those website still complains about an old Adobe Flash Player.
I just followed the instructions and installed it. Please read the following:
I am doing an online VMware certification course as a part of my education. I can't do it because of this prroblem. It complains about an old Flash Player.
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View Related3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies View RelatedI have enabled the gnome (2.30) screensaver and set it to suspend the machine after so many minutes. It works fine!Now, there are cases that I want to use the machine in "server mode". That is, there would not be physical activity on the machine while it serves files, or acts as a ssh terminal. As there is not physical activity, the machine would suspend after the time elapses. Is there a utility/script/something to inhibit suspend? ps. I had no luck with the dbus/python scripts do circulate in the Internet, nor is the "inhibit" applet anywhere available in my gnome distribution. I use ubuntu lucid.
View 2 Replies View RelatedI was thinking, is it possible to keep the internet connection on while in suspend mode? i mean that you could maybe use download something, or use something that doesnt use hdd?
View 4 Replies View RelatedI ran 11.1 for about a year and had only a few issues; but for some (stupid?) reason, decided to go to 11.2.
Now my hibernate does not work (it worked almost flawlessly on 11.1. Both from shutdown options and when closing the lid.
It seems to disconnect the ethernet, but then just reconnects and resumes normal operation.
This is a IBM T42 laptop. It also does not hibernate when I close the lid, which also worked fine on 11.1.
I can't leave this thing running all the time and I don't want to do a full shutdown every time I stop using it.
I've installed all the updates and upgrades.
Put 'nix box to sleep from command line?
I found that the solution was to do: pmi action hibernate
But when I typed in that, it showed: Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Hal was not provided by any .service files
I have fedora 13. What is the difference between suspend and resume? If I suspend, how do I turn on the pc? If I hibernate, how do I get out of hibernation?
View 3 Replies View RelatedI was trying to get this feature: wake up my htpc from s3 with my remote control and the solution is to modify /proc/acpi/wakeup and a descriptor in /sys. Here are the details: I'm using a Microsoft IR receiver for MCE remote that appears as dev 2 of bus 2 in lsusb
root@htpc:~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 045e:0714 Microsoft Corp.
Bus 001 Device 005: ID 045e:0715 Microsoft Corp.
Bus 001 Device 004: ID 045e:0707 Microsoft Corp. Wireless Laser Mouse 8000
Bus 001 Device 003: ID 045e:070c Microsoft Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub....
That's USB0 I have to enabled, why not usb 1 or 2 (bus 2 in lsusb)? Moreover why are all the disabled/enabled preceded with a star and S4 and not S3 mentioned? Nevertheless that wasn't enough to get it work. I looked in gconf-editor in apps/gnome-power-manager/general but I have no can-suspend or something similar... (I'm running on 10.10, with 10.04 I could suspend only once, afterwards the computer didn't go to suspend, just black screen then login screen). So I looked in /sys/ and found that 'cat /sys/bus/usb/devices/2-1/power/wakeup' (notice the 2.1 as bus 2 device 2 (0,1,...) gave 'disabled' so a echo enabled > /sys/bus/usb/devices/2-1/power/wakeup and now I can wake-up with the remote when I want.
What I don't understand:
Why USB0 in /proc/acpi/wakeup ?
Why have to change in /proc and /sys ?
Is it possible to automate this to get it work even if I change the usb port the receiver is plugged in ?
First of all let me introduce myself. My name is Rasheed and i am from UAE, after not having any reply from a week in Fedora's official forum i came across the linuxquestions through google and hoping to help others and resolve my issues as well with the help of experts here. So here is my problem what i am currently having. I am going through a serious issue right now. My laptop crashes when SUSPEND/HIBERNATE or unplugging the laptop's charger.
View 14 Replies View RelatedI am using ubuntu 9.10 and when i close the lid of the laptop it does not hibernate or suspend?
what do i do?
I have a bcm4312 wireless network adapter that worked in F11 after following this guide: [URL]. Now, the wireless adapter won't work.
View 14 Replies View RelatedF12 DVD upgrade from F11 worked flawlessly but, what happened to my Freecell game??
View 2 Replies View Relatedon fc7-10 the sound on my laptop worked, in fc11 it is broken. just did a yum update How to get sound up and going?
[Code]...
I used to run an application named DBabble (client) through Wine back when I used 11.1. Then, the version of Dbabble client was 2.2h -I still have the exe-. Now I tried this same version on 11.3 with Wine, and this is what I got:
ImageBam - Fast, Free Image Hosting and Photo Sharing
Latest version of the client is 2.9i, and this one seems to work fine, but the server I want to connect needs client 2.2h. I thought it was the Wine version, but a friend tried the exe in a system with 11.1 and latest Wine, and it worked for him.
So there's probably a change in 11.3 that broke this app under Wine. Is there a solution or workaround for this on 11.3?
I have a Compaq Evo N610c that was running 9.10. I was reluctant to upgrade to 10.04 since everything was working like a clock. But, alas, the "newer is better" bug bit me and I just HAD to try out 10.04. So, I installed it in a dual boot mode, keeping my 9.10 in tact. I'm glad I did! I use an Enterasys Roamabout CSIBD-AA-128 wireless lan card to connect to my network. I use WEP 128-bit encryption for the network. I connect without issue in 9.10.
In 10.04, I am unable to connect to the network. I am sure that the card is recognized, as the system "sees" my network and tries to connect. I am asked for "wireless network authentication required". I have tried both passphrase (WEP 40/128-bit key) and WEP 128-bit passphrase (network name 5rueckls). When I enter either, the computer looks like it is trying to connect, but never gets there. Settings under the "Editing Auto 5rueckls" include Mode: Infrastructure, MTU: Automatic, IPv4 Settings Method: Automatic, IPv6 Settings Method: Automatic, Wireless security: WEP 40/128 (key entered), WEP Index 1, Authentication: Open System. Available to all users is "ticked". I am very new to the whole Linux/Ubuntu environment, but have made alot of progress! I can follow direction very nicely.
first i make one partiton ten format it add mount point and fire luksopen command and create secert file and enter this in crypttab but when i rebbot it showes scert file not found and partion remain unlocked
View 1 Replies View RelatedMy suspend-to-disk and suspend-to-RAM stopped working months ago. I've grasped at straws about why ever since, but I really don't think it's a software problem, because I've reinstalled my system (MEPIS) repeatedly. What sort of hardware failures could cause this? What should I be looking for? I notice that at boot, Linux always says "no resume image found," even if I left the system in suspension or hibernation. I can post parts of the dmesg if someone tells me what to look for; I can't display the whole thing because it's too long to fit here.
View 7 Replies View RelatedThis is my first ever question. I'm a new-bee when it comes to configuring lenny at admin level, however with the help from the forum I was able to get my SONY Vaio VGN cs 190 configured successfully. I've gnome-core installed and here is my concern. I've Windows running on the same machine. I've a realtek sound card with Dolby SoundRoom. It works beautifully in Windows, as I've Dolby Control Center application to control the amount of bass I need. I also have a logitech Z-2300 2.1 Speaker system. Even though, it's a 2.1, it produces amazing sound. If I disable Dolby using Dolby Control Center, I fail to listen wonderful sounds whether I'm playing music or movies in Windows.
I'm not quite pleased with my experience of movies or music with Lenny as there is no Dolby Control Center application to control it. I've tried several suggestions, but none was fruitful. I've even tried Wine, but I'm not happy with it. If I can get this Dolby Control Center to work, I can completely take off Windows from my Laptop, which is my ideal goal.
I have never been able to use the Screen Saver in the Desktop settings, as even clicking on a Screen Saver, crashes the whole Desktop Settings.Here is what I get:
Code:
Application: systemsettings (1.0)
KDE Platform Version: 4.4.1 (KDE 4.4.1) "release 228"
[code]...
Logitech webcam:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I'm currently learning how to program in PHP i have recently installed LAMP server and apache2 and MySQL, i have run a bunch of commands, so i can really remember them all..the ones i can remember is:
Code:
apache2 php5-mysql libapache2-mod-php5 mysql-server
sudo tasksel install lamp-server
sudo apt-get install apache2
and when i entered url in my browser bar i got a screen saying it worked but no content has been added.
I tried put my test file (called index.php) into /var/www/ still not worked renamed it to index.html still not worked.tried url and with index.html wasn't working.
i woke up today to try find out what was wrong. BUT NOW I CAN'T ENTER url.I got a "server not found" screen like when you enter an incorrect adress
i tried to restart apache using:
Code:
sudo /etc/init.d/apache2 restart
but get's
Quote:
* Restarting web server apache2 apache2: Syntax error on line 233 of /etc/apache2/apache2.conf: Syntax error on line 12 of /etc/apache2/conf.d/index.php: Expected </?php> but saw </div>
[fail].