Ubuntu Installation :: Mis-detect Vista When Installing Grub?
Jul 6, 2010
I recently installed Ubuntu Studio on my PC, dual-booting it with Vista. Once the installation had finished, and I had rebooted, Grub showed the two Vista options:
Windows Vista (loader)
Windows Recovery Environment (loader)
When I load up "Windows Vista (loader)" it opens my Acer eRecovery Management, but when I load "Windows Recovery Environment (loader)" it opens what looks like a normal version of Vista. Is it possible that on installation, Grub accidentally swapped the two around, or have I probably mucked up my computer?
View 2 Replies
ADVERTISEMENT
Dec 11, 2009
I just spend 10 hours tryng to find a way to get my old grub working again after re-installing windows in an emergency, but it is not working...
View 3 Replies
View Related
Apr 27, 2009
I will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
View 7 Replies
View Related
Jul 10, 2010
I am trying to dual boot my system. MS Vista and Debian lenny 5.05. Installed Vista first, need vista for voice recognition software. Installed Lenny second but grub does not see Vista. Installed NTFS-g3 so I can read and write to /dev/sdc1 where my vista is. But grub still does not detect it. Installed grub2 and upgraded from legacy but still grub2 does not see the vista partition.
View 6 Replies
View Related
Sep 1, 2010
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
View 1 Replies
View Related
May 11, 2010
i did a fresh install of 10.04 on my asus 1005ha netbook (first-gen 1005ha, if it matters), and it works great. However, grub does NOT detect my windows partition. In gparted, the partition is recognized as "unknown". I can't mount it in ubuntu.
This is what fdisk gives me:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
My windows 7 is not corrupted. it is also not virus-infected. I know what i am doing, and i know my windows is fine. it has been running fine prior to installing ubuntu. I'm just saying this becuz i noticed that viruses are a common response to similar problems like this.
View 9 Replies
View Related
Jul 15, 2010
I just upgraded to Ubuntu 10.04 from 9.10. Under 9.10 I dual booted to Ubuntu or Vista in the grub menu. Now that I have upgraded I cannot boot to Vista. When I select the Vista option in the Grub bootloader it restarts the computer and comes back to the grub menu screen again. I have run the boot_info_script. The results are:ot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
[code]....
View 3 Replies
View Related
Apr 23, 2010
I have a vista laptop with ubuntu installed in a partition. Obviously it installed GRUB for dual boot purposes. Now I would like to remove Ubuntu and GRUB as I intend to install Kubuntu/Mint at a later date. I understand I have to fix the master boot first and then remove ubuntu. I do not have Vista recovery CD as the it has been bundled with the system by Toshiba.
View 4 Replies
View Related
Mar 21, 2010
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
View 2 Replies
View Related
May 14, 2010
I Dual-Booted (if im not mistaken is the term for installing two OS) Ubuntu 9.10 and Windows Vista. Using Ubuntu 9.10 as my primary OS and using Vista for some programming ( college stuffs ) Only a moment ago, i reformat/recovered my Vista and only i found out that, my GRUB loader has gone. I'm asking is there any way for me to install a GRUB loader using Vista?
View 7 Replies
View Related
Sep 5, 2010
I recently upgraded to Ubuntu 10.04. Now after rebooting I don't get the grub menu anymore nor can I get into ubuntu or vista (I used to dual boot between ubuntu and vista). I get to a black screen with an blinking cursor.
Disk info:
HP dv5t x64 Intel 2.40 Ghz
View 9 Replies
View Related
Mar 8, 2009
I have a laptop which was originally running Windows Vista, I attempted to install Windows XP on via USB since the laptop couldn't boot the install disk (this has turned out to be a bad disk drive. This fell flat on its back and wouldn't even finish the install (although not before formating the Vista install in to oblivion). Although I was extremely careful to leave the Vista recovery intact. So I managed to get Ubuntu 8.10 (XFCE if that makes any difference) installed over USB. I was wondering, Could I use the GRUB louder to boot into the recovery drive? Laptop is a Toshiba Equium L350D
View 7 Replies
View Related
Feb 27, 2010
I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".
And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"
When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080
Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris
Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.
View 4 Replies
View Related
Jan 16, 2011
I am running vista 64x and i partitioned unbuntu 10.10 on my computer.
I deleted the ubuntu partitioned from my computer through Vista and made it all one drive. SO now all my computer has i the recovery partition which is 9.61GB and the main Vista partition that is 287.65GB. That is ALL.
I restarted my computer and it gives me the following error:
error:
I know you have answered millions of questions about that error, however the problem i have i cant find a solution for anywhere.
Now, i have a GParted disk to manage my paritions because i have had this problem before. However when i put it in the computer it only shows my 2 partitions. (The recovery one and the vista one) Both of them are "unmounted"
How do i disable grub from loading through something like GParted that is boot loaded off a disk at system startup? I only have vista on this computer, but i cant get to it because GRUB is in the way. (I do not know if its grub1 or grub 2, but its ubuntu 10.10)
I DO NOT have a recovery disk for my vista computer, ive lost it, however i have the Windows 7 Upgrade disk, but that will not load from the disk when i turn on the computer.
View 1 Replies
View Related
Feb 21, 2010
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code:
BOOTMGR is missing.
Press CTRL + ALT + DEL to reboot.
[code]...
View 14 Replies
View Related
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
View Related
Feb 10, 2010
I have just suscribed into this forum. I have a problem: my notebook (NOTEBOOK SATELLITE L300-SP5917A - INTEL CORE 2 DUO T6400 (2.00 GHZ - 2 MB L2 - 800MHZ FSB) - 15.4 WIDESCREEN TRUBRITE TFT LCD - 400 GB SATA 2 .5 5400 RPM - 3GB PC2-6400 DDR2) doesn't boot ubuntu after the last security upgrade. I have wubi installed.I have Windows Vista and Ubuntu in the boot menu. I select "Ubuntu" and that leads me to the GRUB shell. I'm new in linux. It seems that GRUB doesn't detect the kernel. Maybe the file menu.lst has been deleted, or something similar, but I can't make my ubuntu to boot.
View 4 Replies
View Related
Jan 14, 2009
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies
View Related
May 14, 2009
How to installs and I used gparted to create my install of fedora 10 on my laptop (which had xp on it). After a major XP crash I reinstalled with Vista business on the XP partition. Now my linux partition is definately there however I Vista boots now and the grub loader does not come up.
View 4 Replies
View Related
Jul 2, 2011
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies
View Related
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
Dec 31, 2010
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
View 9 Replies
View Related
Sep 4, 2010
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies
View Related
Feb 1, 2011
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
View 2 Replies
View Related
Apr 7, 2011
I wanted to install Ubunutu on my laptop and it currently has windows vista installed on it and installed using latest Wubi. I selected Ubuntu from dropdown menu after the system restarted. But when the sytem shows the username page to login the KEYBOARD and MOUSE are not responding.
I am using Lenovo Y series laptop and using the inbuilt keyboard/touchpad.
View 1 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Nov 6, 2009
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
Aug 19, 2010
I'm having an issue installing Ubuntu with Windows 7 Home Premium 64-bit through Wubi. The Wubi installation works great and Ubuntu seems to install after the first reboot after selecting Ubuntu from Windows' boot menu, however whenever I select Ubuntu from Windows' boot menu after Ubuntu installs and it reboots for the second time, it loads the GRUB bootloader, however Ubuntu isn't listed at all.
Windows 7 is listed twice and Windows Vista is listed (seems it picks up the recovery partition for Windows 7 as Vista) and when I select the first Windows 7 from the GRUB bootloader, it just goes back to Windows' boot menu with Windows 7 and Ubuntu as the selections. If I select the second Windows 7 from the GRUB bootloader, it'll boot Windows 7 like normally. It looks like Ubuntu is nowhere to be found. Because of that, I just ended up uninstalling it.
View 4 Replies
View Related
Apr 15, 2010
After installing Fedora 12 from a live CD, I ended up that my Vista completly gone is.
In the grub loader, I cannot see my Vista boot record.
I thought when installing, I choose 'use free space', as there I reservered 7 gigabyte for Fedora.
I can see all the files including my Windows directories and home.
Is there a possibility that I can recover my Vista? and so, make it dual boot?
View 2 Replies
View Related
