Installation :: Boot Vista, XP, And Then Installing With Grub?
Apr 27, 2009
I will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
I recently installed Ubuntu Studio on my PC, dual-booting it with Vista. Once the installation had finished, and I had rebooted, Grub showed the two Vista options:
Windows Vista (loader) Windows Recovery Environment (loader)
When I load up "Windows Vista (loader)" it opens my Acer eRecovery Management, but when I load "Windows Recovery Environment (loader)" it opens what looks like a normal version of Vista. Is it possible that on installation, Grub accidentally swapped the two around, or have I probably mucked up my computer?
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code: BOOTMGR is missing. Press CTRL + ALT + DEL to reboot.
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #7 for /boot/grub. => No boot loader is installed in the MBR of /dev/sdb
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says: "Windows cannot start. A recent upgrade or hardware change may have caused this".
And below that: File: \boot\bcd Status: 0xc000000e info: An error occurred while attempting to read the boot configuration data"
When I run sudo fdisk -l, I get the following: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sda1 1 6 48163+ de Dell Utility /dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS Partition 2 does not end on cylinder boundary. /dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS /dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA) /dev/sda5 19066 19457 3148708+ dd Unknown /dev/sda6 15937 18930 24049242 83 Linux /dev/sda7 18931 19065 1084356 82 Linux swap / Solaris
Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start... File: windowssystem32winload.exe Status: 0xc0000225 Info: The selected entry could not be loaded because the application is missing or corrupt.
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment. Here is my Boot Info Script: .....
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now: - NTFS partition (containing general rubbish) - Ubuntu / partition - Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
I have a Dell Inspiron laptop which was set up to dual boot windows Vista and Ubuntu 10.04. I created a live USB image for Ubuntu 10.04 using Unet bootin and rebooted from from this to install Ubuntu on an SD card. When I remove the SD card and reboot the laptop I no longer get the GRUB loader menu, instead I get the GRUB error message. I can not now boot into Windows Vista or Ubuntu! Obviously I have caused a GRUB error. I have rebooted using the USB live image and run fdisk l and blkid, the outputs are listed below. how I can restore the GRUB loader menu back please so that I can access Ubuntu or Vista?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
So I had Windows Vista installed on my laptop(two 250gb HD). After trying to install fedora 10 with the Live CD, with some errors about root and boot, I ( don't really know why) tried the resize option and changed the second HD to 2 partitions. Put boot on the first. The installation was sucessful, i rebooted, but nothing happened. No windows vista, no fedora. So I tried to change by custom installing(installed fedora on first HD) and I guess I messed up a little. I want to boot again into Vista, but even editing grub menus failed. Any ideas on how to solve this?
fdisk -l Code: Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4118425c Device Boot Start End Blocks Id System /dev/sda1 * 1 25 200781 83 Linux /dev/sda2 26 30401 243995220 8e Linux LVM [Code].....
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
My dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
I have a desktop Windows PC with three hard drives. Having successfully installed Ubuntu on a laptop I used the same CD image to boot Ubuntu on my desktop machine. All seemed well so I selected the option to install alongside the existing OS. I left the choice of drive as presented by the installer (it was the largest one) and asked for an 80G partition for Ubuntu. The installation went well but when the machine was restarted it just booted straight into Windows. No sign of the bootloader menu. I'm guessing the BIOS doesn't look at the drive where Ubuntu is installed, and the installer did not put the bootloader on the Windows boot drive. The Windows drive is too small to install Ubuntu there.How do I fix this so that I can dual boot, or alternatively how do I get rid of Ubuntu and reclaim the 80G for Windows?
I use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1.
Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE.
I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and W7?
I installed Ubuntu 10.04 yesterday and things were running smoothly.However, this morning I turn on my PC to boot up Windows Vista. Basically it said the system did not shut down properly and gave me 2 options to choose from.Neither of them worked.It would start to load then turn black and go back to the Grub screen. I can still boot Ubuntu it doesn't seem to want to boot vista.
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
I've previously had a dual boot Vista/Ubuntu machine that was working fine. Fast forward, I'm not able to boot into Vista at all and decide to reformat, return to factory settings after which I'll simply reinstall Ubuntu to get my functioning dual-boot back. I reformat the drive, everything seems to work fine and when I reboot I'm met by the GRUB screen rather then the Vista bootloader screen I expected. I select the Vista option and rather than starting to boot, seeing the Windows splash and then breaking (as it's been doing for a few weeks leading up to my decision to reformat), I'm promptly given a message that it can't find the disk 5252-ACFA (that Vista was previously on). After further inspection, my Ubuntu partition is still in tact and untouched, so I think the 'reformat' simply reformatted the Vista partition not the entire HD as I'd wanted. How do I modify GRUB to point to the new correct Vista boot?
I currently have both Ubuntu 9.10 and Vista installed, and would like the Grub to boot to Windows as default selection. Unfortunately, I did not remember which OS I installed in the first place, and even could not find the menu.lst either.
I use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1. Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE. I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and Win7?
I've used Windows Vista and Windows XP for quite a while before I decided to swap XP for Ubuntu (mainly for the performance). After formatting the drive, where XP was, and installing Ubuntu 9.10 I've discovered that I can't boot into my Vista any more. I used to use a Windows 7 boot loader to switch between Vista and XP (I had Windows 7 installed before Windows Vista) and now it's gone.
I've tried to boot using the GRUB2 that Ubuntu 9.10 uses but I failed. At first it gave me a "no such partition" error whenever I tried to boot it, but after some changes I managed to get it to go in to some sort of a black screen. But it's as far as it goes.
I have also tried to repair the Windows boot with a recovery disc. Unfortunately I get a "The volume does not contain a recognised file system." error whenever I try to import the bcd.temp file using bcdedit.exe
I really need Vista back up since it has PhotoShop on it and all other things that I need in order to continue working on my schoolwork, which has to be done in a couple of days.
