Ubuntu Installation :: Multi HDD Dual Boot - Vista + Lucid Lynx - GRUB ?
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
ADVERTISEMENT
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Jul 22, 2010
I run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
View 1 Replies
View Related
Mar 21, 2010
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
View 2 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Nov 6, 2009
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies
View Related
Jan 25, 2009
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
View 9 Replies
View Related
Jul 25, 2010
I'm using Lucid and trying to dual-boot into Vista.
All I see when I select Vista in the GRUB loader is in the .png image I have attached to this post.
Very confusing....I can get to Vista by inserting the install disk, but then it overwrites (I believe) the GRUB loader.
Also:
Is there any way to reinstall GRUB from the Lucid installation disk without installing another Lucid OS??
View 1 Replies
View Related
Aug 28, 2010
how to change (rename, delete) lines from boot list in grub 2, Ubuntu 10.04? For example, when I boot my pc, I have a boot list with options "Ubuntu 10.04", "memtest" and "Windows 7". I want to delete "memtest" line, as I don't need it, and rename "Windows 7" line to, for example, "Windows 117". How can I do that? Where I should look and edit? In old grub it was enough to edit /boot/grub/menu.lst, but in Ubuntu 10.04 there is no such file and other grub2-related files (like grub.cfg) do not contain this info to rename or delete lines. So, I can't figure out what to do.
View 3 Replies
View Related
Dec 26, 2010
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies
View Related
Jun 27, 2010
I recently installed Ubuntu Lucid on my sisters laptop and it will now no longer boot into Windows Vista.
When Vista is selected, the loading bar is briefly displayed before the screen turns black and returns to GRUB.
EDIT : More specifically, first a long bar is displayed at the bottom of the screen that says something like 'loading windows files' above it. Then the standard vista loading bar, with (c) microsoft under it. Then I get an hourglass pointer and a message "please wait a moment" in the centre of the screen. After a few seconds, the screen then goes black and the computer reboots.
I used a live CD to install Ubuntu and I chose the default automatic option for the dual boot partitioning. All the data on Windows can be accessed from Ubuntu, it just will not boot.
Here is the output of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
View 3 Replies
View Related
May 28, 2010
I was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
View 2 Replies
View Related
Mar 18, 2011
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies
View Related
Feb 15, 2010
Here the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies
View Related
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
View Related
Apr 10, 2010
I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
View 2 Replies
View Related
Dec 12, 2009
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies
View Related
May 11, 2010
I am preparing to do a fresh install of lucid lynx dual boot with vist@ Currently I am running 9.04 in this configuration. The install guide for Lucid says the new grub2 doesn't support more than 2 operating systems. plus I apparently can't edit it either. Besides vist@ there is a hp recovery partition which has a seperate entry in my existing grub. Does this mean I can't use the lucid desktop disk for a fresh install because I would have 3 operating systems? Lynx, vist@ and HP recovery partition.
I only have two applications left I am using on vist@, but I have no recovery disk, only an old image for my vist@. I am very concerned about this upgrade. 5.04 went smooth and each one since then has been a bit harder. I could not get 9.10 to run and had to go back to 9.04. I hope I am not at the end of the road. How about using grub instead of grub2?
View 9 Replies
View Related
Jun 9, 2010
I've planed to install Ubuntu Lucid Lynx 10.04 x64 on my rig. dual boot setup windows 7 preinstalled Intel ICH10R RAID0 manual partition setup 200mb ext3 /boot 2gb swap 100gb ext4 / GUI installer can see my RAID and allows me to create this partitions manually. But when install begins i'm getting error :
Quote: The ext3 file system creation in partition #5 of Serial ATA RAID isw_dgaehbbiig_RAID_0 (stripe) failed
[Code]...
fdisk -l from Live cd shows me separated HDDs without RAID0 wrap (sda and sdb) Also in advanced section where i can configure boot loader default is /dev/sda, which is part of RAId_0. I'm checking isw_dgaehbbiig_RAID_0 as location for loader, assuming that this would be MBR. am i doing this step right?
View 4 Replies
View Related
Aug 7, 2010
I'm running dual boot with Vista and Ubuntu Lucid Lynx. for few days i was running Ubuntu only, downloaded some files and created some directories. few minutes ago, i switched to Vista to see something and i wanted to burn some of the files i downloaded using Ubuntu but couldn't find those folders.
i thought maybe its related to different file system or something so i switched back to Ubuntu and surprise! my folders are not there, instead i got a file, of unknown type with the same name as the folder had! in another folder case it's was an image (some print screen of my browser screen - Mozilla) and again with the name of what was the folder! first - what the hall had happened? second - can i recover my data somehow?
View 7 Replies
View Related
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Aug 2, 2010
I want to try OpenSUSE but don't want to get rid of Ubuntu yet. How can I install it so I will be able to dual boot? I have an empty partition of ~150GB ready for it.When I am installing OpenSUSE 11.3 I get this content in the boot section:
Code:
The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot.
[code]...
View 1 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Mar 20, 2011
There have been many postings on doing Raid 0 setups, and it seems the best way looks like softRaid, but there were some arguments for fakeRaid in dual boot situations. I've seen some posts on dual boot windows/linux in Raid 0, but I was hoping to do a multi-boot using a grub partition, with several Linux distros and Windows 7. There will also be a storage disk for data, but not in the array. From what I gather, I'll need a grub partition which can only reside on one of the two disks, one swap partition on each disk, then the rest I can stripe.
I've got two 73GB WD raptor drives to use for the OS's and programs. I'm just getting my feet wet with the terminal in linux (Ubuntu makes it way too easy to stay in GUI), and the inner workings of the OS, so I have several questions:
Is this going to be worth the effort? Obviously I'm trying to boost performance in boot and run times, but with Grub on a single drive, will I see much gain?
Does this sound like the right methodology (softRAID)? I only have two spare PCI slot's, which don't seem like they would be condusive to hardware raid, but someone who knows more could convince me otherwise.
[Code]...
View 5 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Jan 13, 2010
I'm trying to get a dual boot set up for vista and 9.10
I already have 3 logical partitions
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48000000
[Code]....
View 1 Replies
View Related
Jan 26, 2010
If I were to install windows vista shrink the partition to fit only the OS and dual boot Ubuntu over it would I be able to use windows programs on the Ubuntu install.
In a sense I am wondering if I can use Ubuntu as my primary OS and use my Windows Utilities through Ubuntu on the Ubuntu partition?
If not would it be possible to install them on the windows partition and launch them through Ubuntu?
View 3 Replies
View Related
Aug 27, 2010
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
View 9 Replies
View Related
Oct 29, 2010
I just netinstalled Squeeze to a netbook with Windows7. The installation went well without any problem. Linux is also working OK. When I boot now, grub does not show Windows7. I took default settings during installation. I mean I did not do anything special. What should i do to fix it? Should I run osprober and grub-update?
View 3 Replies
View Related
