Ubuntu Installation :: Stuck Installing 9.04 With Vista And Three Hard Drives
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
ADVERTISEMENT
Jul 21, 2010
I have two drives one is a 500 gig SATA drive running Vista SP 2 now the other Maxtor 160 Gig drive is empty. I would like to install Ubuntu on that drive. Now I just though of installing from the setup however would this screw up my Vista partition ?
View 1 Replies
View Related
Feb 9, 2009
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
View 9 Replies
View Related
Dec 27, 2010
I have been trying to install Ubuntu on my new computer as a duel boot with Windows 7. My computer has four 1TB hard drives, One with Windows 7 installed, two that are used for storing media (both are independent, not in a RAID or anything like that) and one empty hard drive. This hard drive contains a 901.51 GB NTFS partition, and 30.00 GB of Unallocated space, I wish to install Ubuntu in this unallocated space; giving it 20 GB (the 10 GB left over might be used for installing XBMC Live). But when I boot Ubuntu's Live CD the installer doesn't show me the unallocated space, and doesn't really show me any of the extra Hard drives.
View 3 Replies
View Related
Jun 3, 2010
Months ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
View 6 Replies
View Related
May 23, 2010
I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?
View 3 Replies
View Related
Jul 4, 2011
Right so my situation is a little obscure and from all the posts I've read through I can't find one that suits me well enough.My PC's hard drive recently went on the fritz so I backed up all my data, got a brand new Terrabyte hard drive and then put all my stuff on there. I also plugged in the fault drive as a secondary and ahev cleared most of the stuff off it. It's separated into two partitions; E: and F: but together make about 600 gigs. I then have two external Terrabyte hard drives, it's a long story but their connected via USB.
Now I really like the idea fo getting to grips with Linux. I don't want to use a LIVE CD, I've done that already and I want to see how I get along using it as a proper OS. I also really need to keep the Windows Vista for several reasons, most importantly for iTunes which I use to keep my iPhone and iPad up to date and I've heard iTunes and linux don't get along too well, even with programs like WINE. So obviously I'm looking to dual boot and keep all my data but what would be the best way to go about it? Stick it on my primary drive? Or on my slightly faulty drive? Or on one of my two externals? On the bright side, because I'm on a fairly new hard drive, my Vista runs really smoothly, and so I shouldn't encounter too many bugs that windows is renowned for a long the way...
I'd also like to be able to access all my data from both OSs so I don't have to keep jumping from one OS to another. Is that possible? or simple to accomplish?I have a pretty good Nvidia graphics card too, so I'd appreciate it if someone could explain how I get XGl working on Fedora once it's all set up.
View 8 Replies
View Related
Dec 29, 2010
I'm not a stranger to Ubuntu Linux and I was using it for a couple of months with no problems until last week when I turned my computer on and it would go no further than the boot screen and it said 'Error- Insert System Disk'. So I inserted the system disk (Ubuntu Linux 10.something) and after waiting 10 minutes for it to load up it said 'Installation failed, desktop session will now be run and you can try installing again'. So I tried installing whilst on a desktop session and I eventually got to step 4 of 8 and it lets me go no further. This is what step 4 of 8 is:http://oi54.tinypic.com/mx2g79.jpg
And so I cant choose any disks or partitions and so it wont let me go any further. How do I create one? I'm currently running on desktop sessions and they take forever to load up and I cant watch videos or anything because there is no flash. By the way please try and explain to me really simply because I am quite dopey and I wont be able to understand posh complicated computer words.
View 9 Replies
View Related
Feb 19, 2010
I recently used a GParted CD to resize my partition with Vista installed on it in order to make room for another partition in which I installed Linux onto. I, unfortunately, did not back up my data. My Vista partition now does not show up in Grub and when I set it to just boot to the Vista install it will never boot and is stuck in a loop.
I tried using this guide to try to get it back. My problem comes about halfway through this guide when I go to repair my Vista installation nothing shows up under installations. I would really like to get my data from the Vista partition. I guess if I'm SOL then at least I'll remember to backup my data next time..
View 9 Replies
View Related
Nov 13, 2009
I recently installed Fedora 11 x86_64 (dual boot with XP) and am having difficulty finding two of my three hard drives to mount them. This is my setup: 80 GB Hard drive (boot drive) with two partitions, one for XP (NTFS) and one for F11 (ext4). 2x250 GB Hard drives, one is formatted with NTFS, the other one has yet to be formatted (my plan is to use ext4).
All of my drives are SATA, on the same nVidia controller. After the install, I can see only the 80 GB hard drive (both partitions). What do I need to do to find the other two drives? During the install, it called the partitions /dev/sda0, sda1, sda2 and sda3, but I no longer see these drives. If I knew where the drives were I could mount them, but my systems just isn't seeing the drives.
This is the output of df:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_user-lv_root
[code]....
View 6 Replies
View Related
Jul 30, 2010
When you run a Linux live CD it automatically detects your hardware configuration, or at least tries to. Say you got a live CD and it works perfect on one computer, detects all the hardware. If you install the operating system from the live CD to a hard drive, does it only install the drivers you need for your hardware?
If so, say you were to hypothetically do that on a removable hard drive that you lock and unlock with the hardware keys; would that mean if you want to move the drive from one computer to another regularly, the OS would not be configured properly on a different hardware configuration, and wouldn't be able to configure itself properly because it is now on a hard drive? I know that Linux does try to detect new hardware each time it boots, but I guess the short version of the question is: Does installing a distribution on a live CD to a hard drive mean you will not have all the drivers available on the CD?
This is not something I am sure I will ever plan to do, but it would be no different than if you wanted to swap your drive into a new computer. If it could at least still connect to the Internet it might try to reconfigure itself. If installing the live CD means you get absolutely all the contents on the CD, that would answer my question. Maybe someone might know exactly how that would work.
View 14 Replies
View Related
Apr 15, 2010
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
View 2 Replies
View Related
Jun 7, 2010
I have what may appear an odd question. I have never installed Linux before, but I'm very impressed with the Ubuntu philosophy and this forum so I thought I'd give it a shot. I have a Windows wifi network at home with three laptops: One is Windows 7 and the other two are running Vista. My wife uses the Windows 7 laptop and I am using one of the Vista boxes, with the other one currently running in a spare room. I'd like to use the Vista box as a NAS (for our photos, backups, etc) but I need to keep Vista on it for a variety of reasons. Just hooking up the USB drives to the Vista laptop and sharing them out isn't really the way I want to go, and besides it wouldn't let me install Linux...
What I'd like to do is install Ubuntu into VMWare Player or VirtualBox and have it share out the USB drives on the network. The drives are NTFS and I'd like to keep them that way, because I'd like the flexibility of being able to plug them directly into one of our laptops if need be, or access them from the Vista host OS. I understand I'll need to install SAMBA to get this shared out, and I found a tutorial for that so I can try that out. I did download and play around with FreeNAS, but it has lots of issues with NTFS corruption whereas Linux has the NTFS driver for a few years now. I haven't tried an Openfiler appliance yet but that may be a plug-and-play option as well. My questions are:..........
View 4 Replies
View Related
Aug 27, 2010
I have been running ubunto 9.10 and love it. Orginally I was planning on using it from time to time but now with vmplayer and xp I am not sure if I will need my dual boot very much at all.
I have a 400 GB hard drive I want to give more HD space to Ubuntu but after doing some searching read that linux should not be huge. I was going to resize using GParted, put vista to say 50GB, leave Ubuntu along at 67 GB. Then how can I make the left over 275GB for both to used for Data?
I have my HD set up as dual boot details below:
View 2 Replies
View Related
Feb 9, 2010
I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
View 9 Replies
View Related
Jul 3, 2011
I started installing fedora 15 from CD on a dell Vista Laptop (2hz 1g ram) but after the logo finished turning white it stays on the blue screen with the bird.I have been trying fedora 13 and xubuntu on this cheap old con of a laptop from pc world and things run smooth (E-system 1.7hz 512RAM vista
View 1 Replies
View Related
Aug 28, 2010
I am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
View 1 Replies
View Related
May 23, 2010
Having a little problem with 10.04 installation. I have two hard drives installed on my PC. One that had Hardy Heron and one data. When the install program launches from a CD boot, it fails and drops me to a live session to check out the problem. I can see both drives and mount them but if I then launch the installer, it does not give either as an option for installation.
View 4 Replies
View Related
Jul 18, 2010
When i try to install ubuntu 10.04 on my desktop i get through the first 3 steps which are Language, Region, and Keyboard. when i get to Prepare partitions, there is nothing there (same problem with 9.10). I followed the steps of another thread about removing the raid settings and I am sure i did that correctly but it did not work, when i try to find my drives in terminal they can not even be found.
Both of my drives are SATA, one is 250gb, other is 500gb. They are both recognized by other operating systems. I have switched the SATA headers that they are plugged into. I really am just not sure what else to do here. Im not totally stupid at linux, ive been using it for a few years and i have taken two classes for linux in the past year. I really feel dumb for not being able to figure this out :/
View 1 Replies
View Related
May 1, 2011
Alright so i'm trying to install ubuntu 11.04 except it's not recognizing my hard drives. I have two 80gigs plugged in via sata. And neither of them are being recognized by ubuntu. I have tried plugging them in together, and separately, still nothing. I'm getting pretty frustrated. Ubuntu 11.04 just doesn't seem to be working for me. I can run from the liveCD, but i get no unity desktop environment
View 3 Replies
View Related
Sep 1, 2011
I am installing Ubuntu on my server that has 2 2tb disk drives. My plan for this server is to set it up as my web server (using apache), will need a mysql database and would like a ftp site. I could really use some advice on how to partition the hard drives.
View 1 Replies
View Related
Mar 18, 2009
i am new in Linux. i have two drives one IDE and other SATA in my computer.i want to keep windows XP , WIndows 2003 server on one drive and two flavours of linux on the other drive, let say oopen suse and redhat.please help me how i install these sofwares to make multi boot the machine.
View 2 Replies
View Related
Jan 21, 2010
I am attempting to install on a HP ML110 box. It has 2 SATA drives installed. From the live cd I can do fdisk -l and see both drives, I can see both from GPated but during the actual install it doesn't see any drives in which to install.
View 1 Replies
View Related
May 1, 2010
this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
View 1 Replies
View Related
May 4, 2010
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies
View Related
Mar 13, 2011
I installed Ubuntu 10.04 in a Raid 0. The install went fine. When I shut down my machine then boot it back up it shows no raid volumes defined and my hard drives as offline. Then the Disk boot error message. I am new to Unbuntu and I am sure the solution is simple I just need to know what to do.
View 9 Replies
View Related
Jun 3, 2011
Is there any performance degradation or complications that arise from having Linux installed on a separate, physical hard disk from Windows in a dual-boot setup? I have a computer that I'd like to dual-boot Ubuntu and Windows but the current hard drive is quite fragmented and the Windows partitioner won't allow me to make a partition large enough to comfortably run Linux+several gigabytes of media that need to be stored. The rig, however, may have room for another internal drive, so I thought that having a separate physical disk reserved completely to Linux would be an easy solution. The tech guy at the local computer store suggested there might be difficulties with this configuration because one drive needs to be the "master" and the other a "slave", resulting in boot complications.
View 5 Replies
View Related
Jul 6, 2010
I recently installed Ubuntu Studio on my PC, dual-booting it with Vista. Once the installation had finished, and I had rebooted, Grub showed the two Vista options:
Windows Vista (loader)
Windows Recovery Environment (loader)
When I load up "Windows Vista (loader)" it opens my Acer eRecovery Management, but when I load "Windows Recovery Environment (loader)" it opens what looks like a normal version of Vista. Is it possible that on installation, Grub accidentally swapped the two around, or have I probably mucked up my computer?
View 2 Replies
View Related
Mar 22, 2011
I'm trying to install Sid in Virtualbox using debian-testing-amd64-businesscard.iso : Expert install, Sid mirror, Standard system utilities....So far, so good. After that I want to install a minimum gnome, but this time ( I've done it before with success ) I got stuck :
What is the best way to proceed ?
View 11 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
