Ubuntu Installation :: Installing My Sql Server ?
Sep 20, 2010
There are no .exe files which you just click on and then follow the instructions like windows. I'm having troubles installing my sql server. I need to install mysql-5.1.50-linux-i686-glibc23.tar.gz. The website is [url]. I tried some commands in the terminal but it's of no help.
I also need to install earlier versions of firefox (at least before 3.6). So I downloaded 3.5.13 from the mozilla website but have no clue on how to install it.
View 2 Replies
ADVERTISEMENT
Mar 3, 2011
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
View 1 Replies
View Related
Mar 8, 2010
i am trying to install denyhost on ubuntu 9.10 server, to make it run as daemon.I am following steps from this linkI have downloaded version 2.5 of denyhosts, but i cannot find thi sfile/usr/bin/denyhosts.py
View 1 Replies
View Related
Mar 24, 2010
i need to make a FTP server, i tried using the forums but well.... it was no good, i tried with svftpd but i still lack of knowledge and everything.
View 3 Replies
View Related
Jun 13, 2010
I'm about to install Ubuntu Server 10.04 on my home server. I have looked around, a lot, without finding a nice way to record or log all the steps of the installation.
I see two general paths of how my problem might be solved:
Is there any installation log file which I could look in to see which options I choose? It would be best if it included all steps, including partitioning and, in my case, setting up an encrypted volume with a KVM-volume inside it.
Are there any ways to record the installation or take screenshots of it? It's done using the console (with no X window system available). Maybe fbgrab could work, but I do not know how to make it available during the installation.
I could also use a pen and paper. But that is error prone as I do not have the patience to write everything down. It's my last resort though.
View 3 Replies
View Related
Aug 3, 2010
I'm installing ubuntu server 10.04 on HP Proliant DL140 G3, but in the partition part, HD doesn't appear.
two SATA disks are configured as RAID1, the card is HP Embedded SATA RAID, which came along with the server.
fdisk shows there're two disks, sda and sdb.
Ubuntu website says HP DL140 is certified.
is it because lack of drives?
View 2 Replies
View Related
Jan 29, 2011
I'm trying to install server 10.10. I shose my language, than i give the command to install the server. At that moment my screens gets black. A couple of minutes later i get te following screen..
View 7 Replies
View Related
May 21, 2010
I have a 64 bit Dell laptop happily running 10.04 32-bit and Windows 7 booting with GRUB. I want to also install Lucid server on a spare 20GB empty partition and I would like to have Lucid server available in the GRUB menu along with Lucid 10.04 and Windows 7.
I don't want to blow away what I already have working and last time I booted from the server CD to try to install it (9.10), it didn't look as easy as when I installed workstation. Will an install of Lucid server gracefully and safely allow itself to be put on a spare partition and install itself in GRUB or so I need to do this manually? If I lose my Lucid workstation install, I am in trouble.
View 3 Replies
View Related
May 27, 2010
I am having trouble installing Ubuntu Server 10.04LTS on an IBM x3650 server (Model 7945 K2G). The install CD cannot find the drives, so I cannot continue with the installation. Manually selecting mptsas as the storage driver doesn't work either.I have tried various permutations:
1. 64 / 32 bit Ubuntu Server
2. Using weBIOS to configure a RAID0 redundant virtual drive or not
3. Loading BIOS defaults or messing with most of the related settings
This particular server makes use of the ServeRAID M1015 controller (based on an LSI SAS2008 device).
View 5 Replies
View Related
Apr 30, 2011
I created a Ubuntu Server 11.04 32 bit USB installer with the Universal-USB-Installer-1.8.4.4. I booted it up and get to the ubuntu install menu, were my first choice is "English" as language. Then I get to an installation menu were I proceed to "Install Ubuntu Server", but when doing so the screen just go blank and nothing happens. I've searched around for a solution but can't seem to find one.(Note: I've installed Ubuntu Server on other computers without facing this issue, so I don't know what went wrong this time.)
View 2 Replies
View Related
Feb 5, 2010
How to installing ubuntu 9.10 server in command line mode?
View 1 Replies
View Related
Feb 1, 2011
I'm trying to make a fresh install of Ubuntu 10.10 Server 64bit but is stuck with the Partitioning Disk part and Ubuntu 10.04 LTS provides the same error. The installation wizard gives me a menu:
!! Partitioning disks
This menu allows you to configure iSCSI volumes
iSCSI configuration actions
[code].....
View 1 Replies
View Related
Mar 11, 2009
I've a rented dedicated server with (presumably) no window manager installed.How would I go on about installing Xfce? (the ultimate goal is being able to VNC into it)I checked but that seems to assume you already have a window manager, so I was a bit wary of just trying it.
View 1 Replies
View Related
Jan 31, 2010
I hope this is an easy question to answer, how do update my nVidia drivers? Can I add a repository so it automatically updates? I have downloaded the latest verson from the nvidia website. When I so a "sudo ./NVIDIA-Linux-x86_64-190.53-pkg2.run" I get "Error: You appear to be running an X server; please exit X before installing"
View 1 Replies
View Related
Sep 6, 2010
I cannot find dpkg directory in /usr/bin folder and while installing mysql server it gives the following error Errors were encountered while processing:
/var/cache/apt/archives/mysql-server-5.0_5.1.30really5.0.75-0ubuntu10.5_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 1 Replies
View Related
Jan 4, 2011
I am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?
View 6 Replies
View Related
Oct 19, 2010
i am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to)
debian-503-ia64-CD-1(notice diffrent version tryed to)
debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
View 7 Replies
View Related
Feb 22, 2011
Perty self explanitory, I'm trying to boot up ubunto server edition 10.10 from a USB stick (pen drive) and it works fine until step 3 when it says "Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not put in the drive. If so you can insert it and try again
Try again to mount the CD-ROM? <Yes> <No>"
I don't have an installation cd-rom! I put the .iso file onto a memory stick, inserted it into my old computer (which i will turn into a server later) , restarted it and got past the first two slides and got this error? Do I have to put the iso on a cd-rom?
View 3 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
Sep 17, 2010
I would like to install and configure Transparent squid proxy on a gateway server ,but i dont have a local OR intranet DNS server.I am facing issues do that ,regard .My IP series is 192.168.1.1/24
View 5 Replies
View Related
Jan 12, 2010
I know this seems obvious but i'm stuck. I'm trying to install squid via the command "yum install squid" and here is the output:Quote:
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
[code]....
View 1 Replies
View Related
Oct 9, 2010
I wanted to install an ftp server on my open suse server.
View 1 Replies
View Related
Jun 23, 2011
I have been trying to get Gnome and VNC installed on Ubuntu 10.10 Server 64 bit which is running on a VPS which I have no physical access to (only SSH). I have successfully done this on CentOS before (using guides I found through Google) but I cannot seem to get it set up in Ubuntu. First of all, I have good reasons for needing a *full* GUI via VNC on my VPS. I am aware of the security implications. Like I said, I have done this before on CentOS, but I want this machine to use Ubuntu as I need a Debian environment. So far, I have clean installed, then installed the desktop environment by:
Code:
sudo apt-get install ubuntu-desktop
Then I have created a sudoer user through which I installed vnc4server following instructions on [URL] I have tried a variety of tweaks since then but the closest I have managed to come to connecting to VNC is a grey VNC window (of the correct geometry that I specified), with a black pattern with the X mouse pointer which moves around. I know I can't be far off with this, but I am not getting Gnome or the software installed. I am using TightVNC on my local Ubuntu machine to connect.
View 2 Replies
View Related
Oct 13, 2010
I just came to ask a question which its answer will help me to get rid of installing linux ubuntu server 64-bit edition over 100 times. (hell of a job) the point is to prepare an installation CD in which all my company requirements like specifide partitioner and some packages included. the question is, Is that possible? if yes, HOW?
View 2 Replies
View Related
Oct 25, 2010
I'm thinking of installing Ubuntu, but before I do that I'd like to know if installing it removes your copy of Windows. If it does, is there any way I can work around that?
View 1 Replies
View Related
Apr 27, 2010
When I start the bootable cd of ubuntu server 8. in a few seconds I get this error:
[116.429557] Kernel panic - not syncing: Fatal exception in interrupt
View 1 Replies
View Related
Jul 21, 2010
I am going to install an FTP server on a headless server running ubuntu. The thing is that I want to be able to manage it completely via a web interface or a remote gui from any other system. The idea is that the manager of the accounts of the ftp could do his tasks without having to ssh into the server or anything (since he will completely ignore its a linux system and he does not need to know how to use it or log in or whatever). Is there any way to manage an ftp server like this?
View 9 Replies
View Related
Jul 19, 2011
I am attempting to get a Brother HL-2270DW B&W Laser Printer working (USB/LAN/Wifi Capable) and on my journey of instructions from the brother website, it stated there are a few "Pre-required Procedures"Quote:
# Pre-required Procedure (4)
Related distributions
Debian, Ubuntu
[code]....
View 3 Replies
View Related
Jul 8, 2011
I have a HP Officejet J3680 Printer with a USB connection. How do I install it on Ubuntu server?
View 6 Replies
View Related
Jan 5, 2010
I'm trying to install DekiWiki, which has as a dependency mysql-server. This is what's going on:
Code:
root@servername:~# apt-get install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
[Code]...
Do you think this package might be corrupted, and if so can I manually specify a different version or a different package? I don't know what else to do; ctrl+c to kill it results in dpkg hangups that yeah, I can purge, but I'd rather not be doing that more than is really necessary.
View 2 Replies
View Related
