I'm installing ubuntu server 10.04 on HP Proliant DL140 G3, but in the partition part, HD doesn't appear.
two SATA disks are configured as RAID1, the card is HP Embedded SATA RAID, which came along with the server.
fdisk shows there're two disks, sda and sdb.
Ubuntu website says HP DL140 is certified.
is it because lack of drives?
I have Windows 7 on SSD and have installed Ubuntu on a separate HDD.
When the PC boots, I get the boot manager menu, if I choose Windows 7 it fails with error "no such device or partition".
I can mount the SSD and see all the Windows files still there, I think that the boot manager just needs to be pointed in the right direction but not sure how.
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
After installing Ubuntu on a hardrive that already had XP on it, when I get to the part where I choose what OS to boot, and I select XP, all I see is the Windows loading screen for about 3 seconds, then the pc shuts down and restarts itself, and goes back to the OS options code...
View 5 Replies View RelatedI just bought a Intel D525MW ITX board, a PicoPSU and a stick of 2GB ram.
I burned the new stable debian netinst to a disk and booted it up from a usb cdburner. At this point I had a usb keyboard and a usb kingston pen drive (temporary / ) connected. The computer would freeze whenever I chose a menu item. I rebooted a couple of times, same thing. I disconnected the usb pen and were finally able to start a graphical install. I quickly reconnected the pen and the install went fine as far as I could see.
Now. When I boot from the pen it just freezes showing "GRUB lading. Welcome to GRUB!" and a blinking underscore.
I were able to boot the usb pen on my Alienware laptop just fine - although it wanted a reboot after it ran a fsck.
Ok, so I have Linux Mint 7 "Gloria", using kernel 2.6.28-11.
I got a new GeForce 8400GS and replaced my ATi pile of sh*t with it
no problem, Mint starts up fine as if nothing happened. code...
Everything seems fine, so I reboot and all seems fine, except when
I try to play music or a video I get no sound at all. I'm fairly
certain that something in the first links instructions (the Ubuntu ones)
removed something it shouldn't have, but I have no idea what to look
for.
I take an image from installed fedora14 with systemimager. Then I installed a copy of it on another system. After successful installation, Machine was rebooted and then I couldn't log in to system.
I tried log into system with in it 1 and that was done, then I created another user, but after running init 3 in commandline, it didn't log into the system again.
There are no .exe files which you just click on and then follow the instructions like windows. I'm having troubles installing my sql server. I need to install mysql-5.1.50-linux-i686-glibc23.tar.gz. The website is [url]. I tried some commands in the terminal but it's of no help.
I also need to install earlier versions of firefox (at least before 3.6). So I downloaded 3.5.13 from the mozilla website but have no clue on how to install it.
I've got a DNS problem I cannot figure out. I've been digging and pinging all day and I've waited for caches to expire and I'm not having much luck.From my desktop mac, I can't seem to resolve mail.port-o-call.net:
Code:
My-Mac:~ sneakyimp$ ping mail.port-o-call.net
ping: cannot resolve mail.port-o-call.net: Unknown host
[code]....
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
View 10 Replies View Relatedi am trying to install denyhost on ubuntu 9.10 server, to make it run as daemon.I am following steps from this linkI have downloaded version 2.5 of denyhosts, but i cannot find thi sfile/usr/bin/denyhosts.py
View 1 Replies View Relatedi need to make a FTP server, i tried using the forums but well.... it was no good, i tried with svftpd but i still lack of knowledge and everything.
View 3 Replies View RelatedI'm about to install Ubuntu Server 10.04 on my home server. I have looked around, a lot, without finding a nice way to record or log all the steps of the installation.
I see two general paths of how my problem might be solved:
Is there any installation log file which I could look in to see which options I choose? It would be best if it included all steps, including partitioning and, in my case, setting up an encrypted volume with a KVM-volume inside it.
Are there any ways to record the installation or take screenshots of it? It's done using the console (with no X window system available). Maybe fbgrab could work, but I do not know how to make it available during the installation.
I could also use a pen and paper. But that is error prone as I do not have the patience to write everything down. It's my last resort though.
I'm trying to install server 10.10. I shose my language, than i give the command to install the server. At that moment my screens gets black. A couple of minutes later i get te following screen..
View 7 Replies View RelatedI have a 64 bit Dell laptop happily running 10.04 32-bit and Windows 7 booting with GRUB. I want to also install Lucid server on a spare 20GB empty partition and I would like to have Lucid server available in the GRUB menu along with Lucid 10.04 and Windows 7.
I don't want to blow away what I already have working and last time I booted from the server CD to try to install it (9.10), it didn't look as easy as when I installed workstation. Will an install of Lucid server gracefully and safely allow itself to be put on a spare partition and install itself in GRUB or so I need to do this manually? If I lose my Lucid workstation install, I am in trouble.
I am having trouble installing Ubuntu Server 10.04LTS on an IBM x3650 server (Model 7945 K2G). The install CD cannot find the drives, so I cannot continue with the installation. Manually selecting mptsas as the storage driver doesn't work either.I have tried various permutations:
1. 64 / 32 bit Ubuntu Server
2. Using weBIOS to configure a RAID0 redundant virtual drive or not
3. Loading BIOS defaults or messing with most of the related settings
This particular server makes use of the ServeRAID M1015 controller (based on an LSI SAS2008 device).
I created a Ubuntu Server 11.04 32 bit USB installer with the Universal-USB-Installer-1.8.4.4. I booted it up and get to the ubuntu install menu, were my first choice is "English" as language. Then I get to an installation menu were I proceed to "Install Ubuntu Server", but when doing so the screen just go blank and nothing happens. I've searched around for a solution but can't seem to find one.(Note: I've installed Ubuntu Server on other computers without facing this issue, so I don't know what went wrong this time.)
View 2 Replies View RelatedHow to installing ubuntu 9.10 server in command line mode?
View 1 Replies View RelatedI'm trying to make a fresh install of Ubuntu 10.10 Server 64bit but is stuck with the Partitioning Disk part and Ubuntu 10.04 LTS provides the same error. The installation wizard gives me a menu:
!! Partitioning disks
This menu allows you to configure iSCSI volumes
iSCSI configuration actions
[code].....
I've a rented dedicated server with (presumably) no window manager installed.How would I go on about installing Xfce? (the ultimate goal is being able to VNC into it)I checked but that seems to assume you already have a window manager, so I was a bit wary of just trying it.
View 1 Replies View RelatedI hope this is an easy question to answer, how do update my nVidia drivers? Can I add a repository so it automatically updates? I have downloaded the latest verson from the nvidia website. When I so a "sudo ./NVIDIA-Linux-x86_64-190.53-pkg2.run" I get "Error: You appear to be running an X server; please exit X before installing"
View 1 Replies View RelatedI cannot find dpkg directory in /usr/bin folder and while installing mysql server it gives the following error Errors were encountered while processing:
/var/cache/apt/archives/mysql-server-5.0_5.1.30really5.0.75-0ubuntu10.5_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
I have a NAS server running Debian with Dnsmasq (local DNS and DHCP service). This is working well, including fetching upstream requests from my ISP's DNS service and caching them locally. I have another PC not running Ubuntu which happily resolves DNS and non-DNS names. E.g.
Code:
ping hagrid.
ping hagrid
both work.
However, this is not the case on my Ubuntu PC. It is only able to resolve DNS names, not non-DNS names.
Code:
ping hagrid.
works but
Code:
ping hagrid
does not.
I have the standard nsswitch.conf and host.conf.
No idea whats going on here I host a couple of domains. Recently I changed ISP and had a change of IP address. I changed my zone files to the new address and updated my nameservers to the ones given by the new ISP and now, my main domain wont work, I can however, receive mail, checking using DNS quick check works and other domains are fine. I'm using OPENSUSE 11
domain
http://www.smalljokes.net
works fine
http://www.hatchnet.com.au
fails
I'm sure i'm missing something simple.
I am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?
View 6 Replies View RelatedWhen I download fast and much my server freeze however if I don't download anything the server can run for weeks without problems but as soon I start downloading fast it doesn't take long until the server freeze again, I mean totally frozen so I have to manually power it down and then turn it on again. This started happening recently I think it started happening after I updated to 9.10 it have always worked perfectly before. Is there anyway to fix this? If not is there a way to downgrade back to 9.04 or 8.10 where everything were working fine?
View 2 Replies View RelatedI have recently downloaded and installed ubuntu 10.4, and I am finding it impossible to connect to the Internet.
I connect to the Internet through an Ethernet cable. My university (Tuebingen, Germany) provides the Internet through this server:
http://10.196.128.11/upload/custom/green/welcome.html (English link).
When I open my browser in windows vista (I have a duel-boot system), my browser (Firefox) automatically goes to this page, and I log in, and am able to then use the Internet.
Ubuntu also searches for this 10.196.128.11 server, but it continually states "waiting for server to respond". I have checked all the settings I could find in windows and compared them to the ones in ubuntu, and they seem to be identical to me. I am using firefox in ubuntu too so I cannot understand the problem.
I'm running Ubuntu 10.10 with all the updates. I'm in an NFS/NIS networked environment. My mounts eventually work, but mountall fails with this message in /var/log/boot.log:
mount.nfs: Failed to resolve server myservername: Name or service not known
Here's the entry in /etc/fstab:
myservername:/nfs/share/path /mount/path nfs
rw,_netdev,bg,hard,intr,rsize=8192,wsize=8192 0 0
Here's the host entry in /etc/hosts:
123.45.678.901myservername
I've noticed that mountall seems to be trying to mount my share before it has network access.
I am using BIND9 and I wand to deny some queries per domain basis.Example: I don't want client1 to query the server for Ip address (A) for domain.comThe server should respond with an error, no such domain, nothing, etc.It's not authoritative for domain.com. I don't want the server to resolve recursive or iterative that domain.
View 3 Replies View Related