I have tried to install Darktable on natty with no avail, i have added the ppa's to the software sources but i keep getting this error in the software center. Dependency is not satisfiable: darktable (= 0.8-0pmjdebruijn3~natty)
View 2 RepliesTrying to install Darktable on Natty. At this point it seem I have entered the info to add and update the repository ok, but it isn't showinmg up as an option to install in the Ubuntu Software Center. Here is my type in:
[Code]...
I just learned about the pretty new raw processing program Darktable which seems to be very capable. [URL] Has anyone here installed it on Fedora already? how to do this. I already tried to install darktable-0.5.tar.bz2 but got stuck.
View 9 Replies View RelatedI've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM
View 8 Replies View RelatedI have added the PPAs to my repositories. However when I try to launch Darktable, a window appears stating that the program is starting, then nothing. The installation appeared to work and DarkTable is listed in the Graphics section of my applications menu.
View 1 Replies View RelatedI've just installed Natty Narwhal onto my laptop, but I cannot find Unity 3D, only 2D. I've installed the propriety NVIDIA drivers, but there still is no 3D option.I've also seen no one who likes Unity, but I do.
View 9 Replies View RelatedI've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
Having a problem in installing Natty onto my ASUS EEEPC. Ive already changed the boot menu to install from USB, however, it will not mount the USB in order for it to boot. I created the image using the Ubuntu startup disk creator and also downloaded the image from the ubuntu website (ive already read about the faults with using some torrents). I know the USB stick works and is bootable as ive installed Natty onto a Acer aspire netbook using it. how i could get the USB to mount so i am able to install Natty.
View 4 Replies View RelatedI have not been able to figure out a way to install Canon LBP2900 laser printer on Natty 64-bit.
View 2 Replies View RelatedI tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies View RelatedI've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?
View 4 Replies View RelatedTried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
View 1 Replies View RelatedIn previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies View RelatedI have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies View RelatedI have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
I just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
View 1 Replies View RelatedFor the past two days ive been trying to get my Teamspeak 3 server to work to no avail. It would be a real favor if anyone wouldnt mind installing it quickly for me, or help in any other way possible. And i have checked every guide and forum post under the sun
View 2 Replies View RelatedI have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
I've tried the bug-reporting tool in Gnome to no avail so far. This isn't a huge problem, more a cosmetic one. I'm running Squeeze beta 2, which was a fresh install. I have a Maxtor USB portable HD, which I use to back up personal data. It auto-mounts fine, as soon as I connect it. I have full read-write access from my regular user account; but when I'm finished accessing it, when I right-click and select "Safely remove" I get an error every time. The error has to do with "unable to unmount . . . ." and I wish I had the exact text but I don't. Anyway, when I open a terminal and check the mount point, the drive *has* unmounted, so I'm not worried about data loss. But why the error? BTW, the drive is formatted as one partition with NTFS.
I'm not looking for an answer so much as I am just trying to see that someone involved in trying to get Squeeze ready to release hears about this. It's no big deal, but it looks bad.
See the attached picture. I'm using Ubuntu 10.04. I've tried removing and re-installing flash using both Terminal and Ubuntu Software Center to no avail.
View 9 Replies View RelatedI created an installation CD and even a usb stick of Ubuntu Lucid Lynx and Natty Narwhal and I keep having freezes during installation.
1. Set my BIOS to boot on CD/ usb stick
2. My computer starts to boot from CD/ usb stick
3. Ubuntu logo plus 5 dots screen shown
4. After that I am shown a snowy green screen with white lines running lengthwise and it freezes.
I already tried creating a new CD and usb stick after re-downloading the .iso installation file and creating the process of creating an installer over and over but still the same problem. Is it a hardware problem or my installer is the problem. I tried installing my old CD of Ubuntu Jaunty that I requested from Ubuntu a long time ago and I can install it without any problems. I am using Jaunty right now...........
I've got openSUSE 11.2 installed. Works quite well in general.Today I tried using my microphone for the first time but had no success. I tried to playing with volume settings but to no avail.I recording something with arecord -f cd test.wavand tried playing it back with aplay test.wavbut got nothing.Then I thought I'd look at my sound card configuration. I selected the "Configure your sound card" from the start menu. And to my astonishment no card has been configured (I was surprised because I am able to hear sounds, play music, etc.).Anyway, I tried configuring my card. I selected Creative Labs | XFi, clicked through the menus, and eventually I got an error:
"The kernel module for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters"Also, the command dmesg | grep soundgives me this[ 35.179567] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.12/linux-2.6.31/sound/pci/ctxfi/ctatc.c:1265: ctxfi: chip 20K1 model Unknown (1102:1003) is found
Ive recently installed lubuntu 10.04 on an old sony vaio. ive been able to connect to the internet (satellite broadband) for a few months then no connection. the connection is fine so its definatly the network on the vaio. ive tried pinging to no avail.
View 5 Replies View RelatedI am unable to print on a new installation of Natty.The print configuration utility reports that no printing service is available. I have comfirmed that cups is installed and get a positive response to "whereis cupsd" When I attempt to start cups from the cl (service cups start) I receive the following response: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.63" (uid=1000 pid=5577 comm="start cups ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init"))
There are no errors produced in the logs - either cups or syslog and if I turn apparmour to complain mode nothing improves: sudo aa-complain cupsd
I am aware of this post: [URL]... but since the workaround has no effect and in the absence of error messages I am not sure that it applies and cannot implement - and note that no print drivers are in play since I can't get cups to start.
I was unable to install Natty on my slave disk, dev/sdb*. Only option in installer are dev/sda*.On the other hand, Gparted recognize all my Hard disks, sda/sdb whatever, and live disk is capable to mount them all.
View 7 Replies View RelatedSorry if this is in the wrong spot. I tried to install GDM2 Setup to change my login screen theme on my fresh Natty x64 install. Through the terminal, I get this message:
[Code]..
How do I install dontzap in natty? (It's not in the repositories.) Or, is there an alternative now?
View 2 Replies View RelatedI am trying to install WoW on my machine, but when input the cd in the drive it doesn't even show up. No windows cd show up for that matter. For some background, I am trying to install it on a Virtual Machine, (Virtual Box) and have windows xp on said VM.
View 6 Replies View Related