OpenSUSE Multimedia :: Microphone Not Working Playing With Volume Settings But To No Avail?
Sep 13, 2010
I've got openSUSE 11.2 installed. Works quite well in general.Today I tried using my microphone for the first time but had no success. I tried to playing with volume settings but to no avail.I recording something with arecord -f cd test.wavand tried playing it back with aplay test.wavbut got nothing.Then I thought I'd look at my sound card configuration. I selected the "Configure your sound card" from the start menu. And to my astonishment no card has been configured (I was surprised because I am able to hear sounds, play music, etc.).Anyway, I tried configuring my card. I selected Creative Labs | XFi, clicked through the menus, and eventually I got an error:
"The kernel module for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters"Also, the command dmesg | grep soundgives me this[ 35.179567] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.12/linux-2.6.31/sound/pci/ctxfi/ctatc.c:1265: ctxfi: chip 20K1 model Unknown (1102:1003) is found
View 4 Replies
ADVERTISEMENT
Nov 25, 2009
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies
View Related
Jan 23, 2010
Mp3s are playing nicely, so does the test sound with Yast. I copied some outputs which you might need to help me figure out whats wrong with my settings.
The motherboard has an onboard sound chip (which I do not use), and I am actively using the PCI sound card (Aureon 5.1, CM8738).
The microphone is coming with the webcam Logitech E 3500 (which worked under 11.1, but updating to 11.2 keeps me without skype functionality).
View 9 Replies
View Related
Jun 11, 2011
I don't know what to do. All my attempts to make changes with alsa-mixer failed.
View 9 Replies
View Related
Apr 6, 2010
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code:
arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
rpm -qa '*alsa*'
Code:
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-oss-1.0.17-25.2.i586
alsa-devel-1.0.21-3.2.i586
[Code].....
View 10 Replies
View Related
Oct 29, 2010
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
View 1 Replies
View Related
Nov 13, 2010
how can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS
- recording audio with Sound Recorder
- installed PulseAudio Device Choooser and PulseAudio Volume Control
- Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
View 3 Replies
View Related
Oct 25, 2010
I have a Dell laptop and have multi-media buttons, some of which control the audio volume. But once a game is running like Sauerbraten, I cannot control the volume. The controls within the game are relative to the master volume, so if the volume is too low, I have to exit the game to adjust it.
View 1 Replies
View Related
Jul 17, 2010
I have some DVD's that I've saved to my comp as an ISO, in Ubuntu they would play fine in Movie Player or VLC, but I've just tried to play one on Debain Lenny and I have the following issues.
Movie Player:
Will play the video but wont bring up the main menu so that I can select which episode that I want. It won't even skip to the next one, it just starts playing the first.
VLC:
So I then though I'd down the trusted ol' VLC. VLC brings up the main menu but I can't select any thing. It just sits there and playing the menu screen for a bit and my mouse clicks seem to have know effect (except double clicking to change to full screen). Then it starts playing the first one, if I try to skip it goes back to the main menu and starts all over again.
This particular issue I sometimes had in Ubuntu with Movie Player (depending on the ISO) but VLC would still play it fine.
Update:
Just got VLC to run the menu correctly by doing the following:
File => Open Capture Device => File Tab => Browse to the file, select it. => Click OK.
I don't really want to have to do this every time I want to watch a video. Does any one know of a setting that will do this when ever I click on the ISO to play it?
View 4 Replies
View Related
Aug 2, 2015
I am running debian linux wheezy, and recently, all of a sudden, all videos in my iceweasel browser have been refusing to play videos of any kind at full volume. I am, however, able to download the video and play it at full volume on vlc player or sytem video player.Why iceweasel is acting this way?
View 0 Replies
View Related
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
May 20, 2010
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies
View Related
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
View Related
Dec 4, 2010
I can't seem to get my microphone working. All the levels are maxed, nothing is muted. I've checked pavucontrol, alsamixer, and sytem-preferences-sound, but according to all that, there is nothing muted, and all the levels are maxed. I'm running ubuntu 10.04. My mic works fine in Windows vista, but not in Ubuntu. I am thinking I may need to update my drivers or something. Also I've gone over the forums but haven't found a solution that works, many of them involve changing the levels in system-preferences-sound, but again, that doesn't work. I've posted the results of aplay -l [URL].
View 1 Replies
View Related
Feb 15, 2010
I've been trying to get my webcam microphone working in flash on Kubuntu 9.10.I have a Logitek Pro 9000, and video and audio work in other applications (skype), but video is all that works in flash (I have flash 10 installed). In the flash settings, it lists the only microphone option as "Linux Microphone", which does nothing. This seems to be a common problem, with a few solutions offered.
One I've tried, which seems fairly straightforward for gnome users, is here. However, whenever I run pavucontrol, I get an error reading "Connection failed: Connection refused".Does anyone know how to either get pulseaudio open, or how to get the microphone working in flash without it?
View 2 Replies
View Related
Feb 22, 2010
I Have a mike that will not work. Period. I have tried to record audio with both Sound recorder and Audacity.
View 1 Replies
View Related
Jan 11, 2011
I had difficulty getting my internal microphone -
p { margin-bottom: 0.08in; } card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I was able to get it to work in the Sound Recorder Application and in the System Testing function, but when I do the Skype Test Call, or call someone with Skype, while I can hear the other person perfectly well, my microphone does not appear to work at all, so it is a strictly one way conversation.
I've made sure with the ALSA Mixer that everything is turned on, and all my sound settings are fine, but microphone won't work in Skype.
View 6 Replies
View Related
Jan 4, 2010
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies
View Related
Feb 11, 2010
I'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
View 2 Replies
View Related
Aug 28, 2010
I have a HP Pavillion dv4 1313dx that has been running Ubuntu Lucid Lynx 10.04 wonderfully, but I am getting nothing out of the microphone.
I am a VERY beginning user (All I really know how to do in terminal is copy/paste, cd, ls, and, chown) and if I can fix this easily, I'd love it.
I already know to check the sound preferences, and nothing is picked up on the microphone, but I think it's there.
View 9 Replies
View Related
Sep 24, 2010
The microphone of my laptop doesn't work, I'm on a HP Pavilion dv7 and neither the build-in or a microphone plugged in works.
I tried many things (like this: https://answers.launchpad.net/ubuntu/+question/78574) to get it work, but none has worked. But I'm quite sure it worked in some earlier ubuntu version.
I'm running kubuntu so it's not a problem in pulseaudio.
Can anyone please help me with this, because I really hate it I have to restart in windows every time for the mic. code...
View 9 Replies
View Related
Oct 10, 2010
I updated my ubuntu today from 10.04.1 to 10.10 and my microphone stopped working. There is no connector option in the input tab to choose the microphone. I checked everything in alsamixer and still nothing. I had no problems in 10.04.1.
View 9 Replies
View Related
Nov 29, 2010
I'm running Xubuntu 10.10 on an ASUS Eee 1215T; the sound hardware on the system is a Realtek ALC259, and there's also sound output through HDMI with an ATI RS690/780 HDMI chip (both according to alsamixer). I was recently fiddling with the sound settings to try to get sound output through the HDMI port. I was successful in that, but I can no longer record sound using the built-in microphone. I'm pretty sure this is something I messed up, since sound recording worked correctly when I first installed Xubuntu, but I'm not sure what I need to do to fix it. I've tried all the promising-looking settings in gnome-volume-control and xfce4-mixer to no avail, and alsamixer also shows everything, both playback and capture, at 100% volume and un-muted; alsamixer also shows that the capture is turned on. I only used these tools (gnome-volume-control, xfce4-mixer, and alsamixer) to get the HDMI output working.
View 8 Replies
View Related
Jan 20, 2011
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies
View Related
Jan 21, 2011
I've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
View 3 Replies
View Related
May 4, 2011
I just installed Ubuntu 11.04 onto a Toshiba L30-10W. The built-in speakers work and the headphone jack work, but I can't get the microphone jack to work. I've tried all of the ALSA options (e.g.- options snd-hda-intel model=laptop), but none of them work.
View 6 Replies
View Related
Jun 17, 2011
I have a Logitech ClearChat Stereo headset, and can hear music playing with the headset connected to the PC speakers (external Logitech). Have setup Empathy to be able to talk to someone using Google Talk. It seems to have been setup correctly, as I can see 2 contacts in the offline list. I don't have PulseAudio installed (I think ??), and can see only System | Preferences | Sound , which doesn't show me much. Here are the settings at present (inboard audio card) ..
Code:
:~$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
How can I test that the microphone is working correctly?
View 2 Replies
View Related
Apr 6, 2010
I've just installed Ubuntu Karmic on a HP pavilion AMD 64 bit.I've a weird problem: the microphone works good, but using skype 2.1 beta, it stops working when te my webcam. Even after restarting skype, the microphone doesn't work. To make the microphone work, it seems to me that I've to reboot.
View 4 Replies
View Related
Jun 28, 2010
The audio coming into the headset works just fine; however, the microphone stopped working after I rebooted a few days ago.I am running Ubuntu 10.04.
View 7 Replies
View Related
Sep 22, 2010
Logitech c210 built in microphone not working?
View 5 Replies
View Related
