Ubuntu Installation :: Natty Install, Will Only Boot Once After Install?
Apr 28, 2011
I've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM
View 8 Replies
ADVERTISEMENT
Apr 29, 2011
I've just installed Natty Narwhal onto my laptop, but I cannot find Unity 3D, only 2D. I've installed the propriety NVIDIA drivers, but there still is no 3D option.I've also seen no one who likes Unity, but I do.
View 9 Replies
View Related
Apr 30, 2011
I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
View 9 Replies
View Related
May 1, 2011
Having a problem in installing Natty onto my ASUS EEEPC. Ive already changed the boot menu to install from USB, however, it will not mount the USB in order for it to boot. I created the image using the Ubuntu startup disk creator and also downloaded the image from the ubuntu website (ive already read about the faults with using some torrents). I know the USB stick works and is bootable as ive installed Natty onto a Acer aspire netbook using it. how i could get the USB to mount so i am able to install Natty.
View 4 Replies
View Related
Apr 28, 2011
I have not been able to figure out a way to install Canon LBP2900 laser printer on Natty 64-bit.
View 2 Replies
View Related
Apr 29, 2011
I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies
View Related
May 5, 2011
I have tried to install Darktable on natty with no avail, i have added the ppa's to the software sources but i keep getting this error in the software center. Dependency is not satisfiable: darktable (= 0.8-0pmjdebruijn3~natty)
View 2 Replies
View Related
May 9, 2011
I've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?
View 4 Replies
View Related
May 20, 2011
Tried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
View 1 Replies
View Related
May 13, 2011
In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies
View Related
May 25, 2011
I have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies
View Related
Apr 28, 2011
I have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
View 3 Replies
View Related
May 31, 2011
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
View 2 Replies
View Related
May 5, 2011
I just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
View 1 Replies
View Related
Sep 1, 2011
I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
View 1 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
May 9, 2011
I created an installation CD and even a usb stick of Ubuntu Lucid Lynx and Natty Narwhal and I keep having freezes during installation.
1. Set my BIOS to boot on CD/ usb stick
2. My computer starts to boot from CD/ usb stick
3. Ubuntu logo plus 5 dots screen shown
4. After that I am shown a snowy green screen with white lines running lengthwise and it freezes.
I already tried creating a new CD and usb stick after re-downloading the .iso installation file and creating the process of creating an installer over and over but still the same problem. Is it a hardware problem or my installer is the problem. I tried installing my old CD of Ubuntu Jaunty that I requested from Ubuntu a long time ago and I can install it without any problems. I am using Jaunty right now...........
View 3 Replies
View Related
Oct 23, 2010
Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
View 9 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
Apr 30, 2011
I was unable to install Natty on my slave disk, dev/sdb*. Only option in installer are dev/sda*.On the other hand, Gparted recognize all my Hard disks, sda/sdb whatever, and live disk is capable to mount them all.
View 7 Replies
View Related
May 2, 2011
Sorry if this is in the wrong spot. I tried to install GDM2 Setup to change my login screen theme on my fresh Natty x64 install. Through the terminal, I get this message:
[Code]..
View 4 Replies
View Related
May 14, 2011
How do I install dontzap in natty? (It's not in the repositories.) Or, is there an alternative now?
View 2 Replies
View Related
May 17, 2011
I am trying to install WoW on my machine, but when input the cd in the drive it doesn't even show up. No windows cd show up for that matter. For some background, I am trying to install it on a Virtual Machine, (Virtual Box) and have windows xp on said VM.
View 6 Replies
View Related
Jun 9, 2011
How would I install Remastersys on Natty 11.04?
I tried the instructions from the Remastersys website: For Karmic, Lucid and Newer with grub2 - version 2.0.13-1 and up # Remastersys deb [URL]
But, I receive an error message when the software sources reload.
View 9 Replies
View Related
Jun 2, 2011
This may be too late, but, Do not under any circumstances install or Upgrade to Ubuntu 11.04 Natty, it is the buggiest distro they have ever produced, it is better to stick to 10.04, it's far more stable and stuff just works. Natty use a new desktop called Unity, that is totally useless, there are ssh issues that prevent logging to a remote terminal using a public key, Natty is just useless. I'm going to have to backup my ~ directory and reformat then re-install 10.4, until such times as Natty is fixed!. Check the launchpad bugs section and you'll see there are more complaints about Natty then any other Ubuntu version.
View 14 Replies
View Related
Jul 9, 2011
I'm having a frustrating time trying to install Ubuntu as a dual boot with Windows 7 on a new Acer Aspire 5750.The initial install proceeded without incident until an error along the lines of "Cannot install GRUB to /dev/sda".I continued without installing GRUB, and attempted to install GRUB from the live CD:Code:sudo mount /dev/sda5 /mntsudo grub-setup -d /mnt/boot/grub /dev/sdaThis installed GRUB, but only linking to my Windows 7 partition (sda2).
View 5 Replies
View Related
Apr 28, 2011
In the control center under System, I have the option: "Install RELEASE". Why do I have this? Yes, I did have Natty Beta2 previously, but since it's official release today I would assume I now have the Release Candidate installed as I have done all the available updates.
View 5 Replies
View Related
Apr 28, 2011
In terminal type these commands:
Afterward go into your login screen and there should be a box saying Ubuntu scroll down on it and pick Gnome.
(NOTE do not have system programs or apps running it will cause install to fail.)
I tried this out works perfectly.
View 4 Replies
View Related
May 20, 2011
how to install pess 2011 on natty narwhal.?
View 1 Replies
View Related
May 27, 2011
Anyone been able to install Viewnior on Natty amd64?
View 3 Replies
View Related
