Ubuntu Installation :: Getting BusyBox When Trying To Install Natty From USB?
Apr 30, 2011
I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
View 9 Replies
ADVERTISEMENT
May 8, 2010
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
[Code]...
View 4 Replies
View Related
Jan 25, 2011
As the name says, I'm new to Linux. I've never even seen Linux. Super noob. I have installed Ubuntu 10.04 onto a Dell Dimension 2350 P4 1.8ghz, 1g ram, GForce 4x 128mb video card running XP. I installed from a Live CD and rebooted. The screen says "finishing Ubuntu install" does a countdown and loads into BusyBox instead. This is what I see:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter help for a list of built-in commands.
(initramfs)cannot mount /dev/sda1/tmpmountpoint
If I boot from the CD I get: Unable to find a medium containing a live file system I'm stuck, I don't know many commands so step by step. Simply saying 'load grub' means nothing to me.
View 1 Replies
View Related
Oct 13, 2010
Last week I took up the courage to replace my windows 7 completely with Ubuntu 10.04 (Lucid). The Installation went fine and was happy with it.
And then on 10th I upgraded from 10.04 to 10.10 (so called perfect 10), when the laptop restarted it showed me BusyBox v 1.15.3 message on the Boot screen.
View 2 Replies
View Related
Apr 28, 2011
I've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM
View 8 Replies
View Related
Aug 18, 2011
I've got Ubuntu 11.04 on a 40G hard disk in dual boot with a Windows XP on a 300G hard disk.
I've got back data with an USB key from a broken Windows Seven, then I've shutdown my ubuntu, but it has difficulties to stop (a mp3 player, which doesn't work well, has already damaged my Ubuntu previously). Then my Ubuntu doesn't manage to boot : it launches "Busy Box" with "initramf". When I boot in recovery mode it fails to boot something at 5s then it tries to launch something constantly.
I've launched a live CD in order to recover my data, but when I try to mount my hard disk I get :
Code:
I've found this link about this problem : [url], but it's too complicated for me.
I just want to recover my data, a system reinstallation wouldn't bother me.
View 5 Replies
View Related
Jul 9, 2010
I'm recieving a BusyBox v1.13.3 screen after attaching my 2nd sata-harddrive. I bootup the pc, but can't get to the login screen because of this message: Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the system wait for the righ device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/bf2ed1f9.... does not exist. Dropping to a shell!
[code]....
It seems one thing to do is to edit my /boot/Grub/menu.lst but I don't have that file! Even with the command: gksu gedit /boot/grub/menu.lst it just opens up an empty box. Note, the 2nd hdd (sdb) has to be removed to properly boot into Ubuntu to browse my files.
Starting a live-cd (9.10) and mounting the /root partition from sda method doesn't work either because the partiton is not mountable in Palimpset due to it not having a any readable data on it! ps. going to try and get into the Grub Loader during bootup and see if I can add "all_generic_ide" to the end of the assigned /root line. Will get back in a bit.Grub screen doesn't even appear if I attach the 2nd harddrive so can't get into that.
View 7 Replies
View Related
Apr 29, 2011
I've just installed Natty Narwhal onto my laptop, but I cannot find Unity 3D, only 2D. I've installed the propriety NVIDIA drivers, but there still is no 3D option.I've also seen no one who likes Unity, but I do.
View 9 Replies
View Related
May 1, 2011
Having a problem in installing Natty onto my ASUS EEEPC. Ive already changed the boot menu to install from USB, however, it will not mount the USB in order for it to boot. I created the image using the Ubuntu startup disk creator and also downloaded the image from the ubuntu website (ive already read about the faults with using some torrents). I know the USB stick works and is bootable as ive installed Natty onto a Acer aspire netbook using it. how i could get the USB to mount so i am able to install Natty.
View 4 Replies
View Related
Sep 9, 2010
I'm running Ubuntu 10.04 i386 on a K9M6PGM-2 mainboard with an AMD Phenom Triple core @ 2.3 gig. I have 2 gig of RAM and Lucid is on a 320 gig HDD, /dev/sda1 shared w/Win XP. I have in the SDC position an 80 gig with Ubuntu Karmic. Long before the Widows was installed this problem annoyed me. My hope was that by wiping GRUB out and rebuilding it from the Live CD that this problem would be fixed but after several boot process' the problem ihas returned.
When I boot into Karmic and look at /sbin I find the file init but of course cannot open it. Is there any way to fix this?
The nachine might boot into Lucid 3 or 4 days in a row with no problem and then refuse to boot anything but WinXP or Karmic. It seems not to be the GRUB as Wendoze and Karmic boot as expected.
At the /dev/sdb I find;
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 9327 74919096 83 Linux
/dev/sdb2 9328 9729 3229034+ 5 Extended
/dev/sdb5 9328 9729 3229033+ 82 Linux swap / Solaris
and do not know the origin of the partition.
View 1 Replies
View Related
Apr 28, 2011
I have not been able to figure out a way to install Canon LBP2900 laser printer on Natty 64-bit.
View 2 Replies
View Related
Apr 29, 2011
I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies
View Related
May 5, 2011
I have tried to install Darktable on natty with no avail, i have added the ppa's to the software sources but i keep getting this error in the software center. Dependency is not satisfiable: darktable (= 0.8-0pmjdebruijn3~natty)
View 2 Replies
View Related
May 9, 2011
I've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?
View 4 Replies
View Related
May 20, 2011
Tried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
View 1 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Jan 8, 2011
Howto install busybox with Gnome on a USB memory stick and make it bootable?
[URL]
View 2 Replies
View Related
May 13, 2011
In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies
View Related
May 25, 2011
I have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies
View Related
Apr 28, 2011
I have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
View 3 Replies
View Related
May 31, 2011
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
View 2 Replies
View Related
May 5, 2011
I just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
View 1 Replies
View Related
Sep 1, 2011
I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
View 1 Replies
View Related
Feb 5, 2011
2 days ago I turned my computer on and I could not enter to desktop as usually. The computer showed a message on a black screen that ended with: BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
I couldn't do anything else. I don't want to loose my not backed up info. I googled the error and I found that I could boot from a live cd so I downloaded Ubuntu 10.10 and boot it from livecd... Now I am running firefox from livecd trying to fix this error. I note that /dev/sda1 my main partition is not mounted, so I have tried to mount it from gparted and from terminal and I am unable to do it... I don't know if the error I am getting on when booting is because of sda1 is unmounted, I found a similar case here [URL] but "bcbc" user recommend me to open a new post.
View 9 Replies
View Related
May 9, 2011
I created an installation CD and even a usb stick of Ubuntu Lucid Lynx and Natty Narwhal and I keep having freezes during installation.
1. Set my BIOS to boot on CD/ usb stick
2. My computer starts to boot from CD/ usb stick
3. Ubuntu logo plus 5 dots screen shown
4. After that I am shown a snowy green screen with white lines running lengthwise and it freezes.
I already tried creating a new CD and usb stick after re-downloading the .iso installation file and creating the process of creating an installer over and over but still the same problem. Is it a hardware problem or my installer is the problem. I tried installing my old CD of Ubuntu Jaunty that I requested from Ubuntu a long time ago and I can install it without any problems. I am using Jaunty right now...........
View 3 Replies
View Related
May 1, 2010
I did the update from within 9.10 to 10.4. Now when Ubuntu boots up, something happens and it goes to busybox. I tried sitting there and waiting, but nothing happened. So I tried typing exit, and then about a minute or two later it finally finished booting.
It's real nice that everyone else is reporting 20-30 second boot times, but before with 9.10 my boot time was around 60 seconds or so, and now it's around 5 minutes. So how can I fix this? Is there a way to post the boot log here? Where would it be located at on my computer?
View 1 Replies
View Related
Sep 4, 2010
I installed all recommended updates as suggested by the update manager, after installing was asked to restart. During this restart I get the error message "udevadmin trigger is not permitted while udev is unconfigured. After this I am left with a BusyBox v1.13.3 [...] (initramfs)_
View 1 Replies
View Related
Apr 21, 2011
there mylaptop crashed due to extensive heat and i cant boot back to my ubuntu system. every time i try to boot back i get an error message and it only shows BusyBox this happened to me before but one day it just miraculously boot back, now that it happened again im afraid that ill have to reinstall so i went here...
here's the error im gettin
mount: mounting /dev on root/dev failed: No such file or directory
mount: mounting /sys on root/sys failed: No such file or directory
mount: mounting /proc on root/proc failed: No such file or directory
Target filesystemdoesnt have requested /sbin/init
No init found. Try passing init= bootarg.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for alist of built-in commands
View 9 Replies
View Related
May 8, 2011
I've been having a problem with this "BusyBox", and unlike windows, my files are not able to be "stolen" to another operating system. I need to get my files back from /home back.
View 1 Replies
View Related
May 22, 2011
I either installed Hardy heron or its predecessor by accident, but began running it exclusively. I did it way back when while trying to create a test drive disk, and I did not repartition the drive, because all my windoze NT stuff survived. I'm now 8.04. Yesterday I had a bunch of updates to do, did them, closed a ton of windows and then pulled up 3 open office files and each, when it came up said there wasn't enough space to save all needed information as they opened. I then closed them and one hung and froze the whole machine, leading me to do a reset. This is BEFORE rebooting from the updates.
Now when I boot into Ubuntu (I'm dual boot) I start to get the opening Ubuntu GUI screen but then get :
BusyBox V1.1.3 (Debian 1.1.1.3-5ubuntu12)built in shell (ash) line followed by:
initramfs)
I'm essentially a total noob, I've rarely used command line and not for a long time. I made a version 11.04 live disk, and it says that the file system is clean, but will not show me any of my old files, only the NT files and directories. I have a ton of unbacked up important data in Hardy Heron so I don't want to do an install from the 11.04 CD.
I've read several threads so far, and can't seem to find anything addressing this that I understand. The drive is a 160GB drive on an HP Pavilion dual core that has a 154GB NTFS boot partition, which is where I'm sure the Hardy Heron files are, and a 6GB FAT32 HP_RECOVERY partition that windoze lists ad drive D (the NTFS is C) The live disk says the FAT32 partition is /dev/sda1 and the NTFS is /dev/sda2
Where should I start? I've seen stuff about booting into recovery mode, but that isn't an option when I boot from the hard drive, and the only older ubuntu disk I have is for 7.something and generates "defective CD" type error messages.
View 7 Replies
View Related
