Ubuntu Installation :: How To Install Canon LBP2900 On Natty 64-bit
Apr 28, 2011I have not been able to figure out a way to install Canon LBP2900 laser printer on Natty 64-bit.
View 2 Replies
ADVERTISEMENT
Debian :: Installing Driver For LaserJet Canon LBP2900 At Squeeze
Apr 23, 2011Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...
View 6 Replies View RelatedUbuntu Installation :: Wireless Install Of Canon MX860 All-in-one Scanner?
Oct 19, 2010I've done a ton of searching and all I've found seems geared to having your printer/scanner connected via USB cable in order to get the scanner working. I have the printer working wirelessly but thus far no go on the scanner. I've downloaded and installed the scangearmp packages.
I've tried installing the sane package via git according to this blog but when I try to run configure I see this: mustek_usb2 backend requires pthread library - disabling and usb isn't listed among the installed backends. I don't even know whether I need usb because this is wireless, but after compiling I run scanimage -L and nothing comes up. I'm still a Linux newb, and have learned a ton in the past couple of days, but this one is stumping me.
Ubuntu Installation :: Natty Install, Will Only Boot Once After Install?
Apr 28, 2011I've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM
View 8 Replies View RelatedUbuntu Installation :: No Unity 3D On New Natty Install
Apr 29, 2011I've just installed Natty Narwhal onto my laptop, but I cannot find Unity 3D, only 2D. I've installed the propriety NVIDIA drivers, but there still is no 3D option.I've also seen no one who likes Unity, but I do.
View 9 Replies View RelatedUbuntu Installation :: Getting BusyBox When Trying To Install Natty From USB?
Apr 30, 2011I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
Ubuntu Installation :: Can't Install Natty From USB Stick
May 1, 2011Having a problem in installing Natty onto my ASUS EEEPC. Ive already changed the boot menu to install from USB, however, it will not mount the USB in order for it to boot. I created the image using the Ubuntu startup disk creator and also downloaded the image from the ubuntu website (ive already read about the faults with using some torrents). I know the USB stick works and is bootable as ive installed Natty onto a Acer aspire netbook using it. how i could get the USB to mount so i am able to install Natty.
View 4 Replies View RelatedUbuntu Installation :: No Bootable Device After Natty Install
Apr 29, 2011I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies View RelatedUbuntu Installation :: Install Darktable On Natty With No Avail?
May 5, 2011I have tried to install Darktable on natty with no avail, i have added the ppa's to the software sources but i keep getting this error in the software center. Dependency is not satisfiable: darktable (= 0.8-0pmjdebruijn3~natty)
View 2 Replies View RelatedUbuntu Installation :: Backups Before Fresh Install Of Natty?
May 9, 2011I've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?
View 4 Replies View RelatedUbuntu Installation :: Natty Narwall Install Crash ?
May 20, 2011Tried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
View 1 Replies View RelatedUbuntu Installation :: Option To Not Install Grub On Natty/11.04 CD Removed?
May 13, 2011In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies View RelatedUbuntu Installation :: Why Is Natty Minimal Install So Much Bigger Than On Maverick?
May 25, 2011I have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies View RelatedUbuntu Installation :: No Video Output After Natty Clean Install With AMD-64 Alternate
Apr 28, 2011I have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
Ubuntu Installation :: Wubi Install Of Natty Running Unusually Slow?
May 31, 2011After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
Ubuntu Installation :: New Natty VBox Install - Splash Breaks Login Prompt?
May 5, 2011I just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
Ubuntu Installation :: Install Natty Narwhal Desktop 32-bit On My Dell Dimension 4700?
Sep 1, 2011I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
View 1 Replies View RelatedUbuntu Installation :: Canon MX Printer Installation On Kubuntu Lucid 10.04 AMD64
May 20, 2010Canon MX320, MX330, MX860 printer installation on Kubuntu Lucid 10.04 AMD64 bit. I am sure Ubuntu Lucid is similar. Once I upgraded to Lucid 10.04 AMD64 bit I found that getting a Canon Pixma MX printer installed was not going to be easy. So I thought it help others if I posted my experience here. To pull this off you will need both the Debian package, (.deb), and the source package from either
Canon Europe: [URL]... Or Canon Australia: [URL]... NOTE: The only reason to get the source is to access the ppd files. They are in the Debian package but it is a lot more work to walk newbies through unpacking the .deb. Since there are errors in the source code it makes impossible to compile a driver. Therefore, you will need to install the 32bit Debian package and force the architecture, then add the correct printer driver from the ppd file in the source package. While these instructions worked for me there are a few assumption I make which mat affect your outcome. My MX860 has a wireless network connection.
In other words I have no idea if this will or will not work on a USB attached printer. (If someone would be kind enough to post back if they get that configuration working that would be cool.) The other assumption is that the general reader is relatively new to Lunix and the command line interface. The commands were cut and pasted from my working kconsole, so they should work for anyone.Here we go:........
Ubuntu Installation :: Can't Install Ubuntu Lucid Lynx Or Natty Narwhal
May 9, 2011I created an installation CD and even a usb stick of Ubuntu Lucid Lynx and Natty Narwhal and I keep having freezes during installation.
1. Set my BIOS to boot on CD/ usb stick
2. My computer starts to boot from CD/ usb stick
3. Ubuntu logo plus 5 dots screen shown
4. After that I am shown a snowy green screen with white lines running lengthwise and it freezes.
I already tried creating a new CD and usb stick after re-downloading the .iso installation file and creating the process of creating an installer over and over but still the same problem. Is it a hardware problem or my installer is the problem. I tried installing my old CD of Ubuntu Jaunty that I requested from Ubuntu a long time ago and I can install it without any problems. I am using Jaunty right now...........
Ubuntu :: Convert .rpm To .deb And Install Canon Drivers?
Mar 20, 2011I was just wondering how I would go about converting a .rpm package to .deb in order to install my Canon LBP1120 Laser Shot drivers
View 4 Replies View RelatedUbuntu :: Can't Install Canon Pixma Ip1800 Printer On 10.10
Oct 15, 2010There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies View RelatedGeneral :: Install Canon Pixma Ip1300 On Ubuntu?
May 29, 2010I have a Canon Pixma Ip1300 color printer but I don't know how to install it on ubuntu 10.
View 3 Replies View RelatedFedora :: How To Install Canon Scanner
Mar 16, 2010I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies View RelatedOpenSUSE Hardware :: How To Install Canon MP190 (11.2 X64)
Mar 20, 2010 i am having trouble installing my multifunctional Canon MP190 under openSUSE 11.2 x64. I have downloaded the 32-bit drivers (there are no 64-bit drivers available) from Canon 's site (PIXMA MP190) in .rpm format but that 's about it This is what i have done so far:
1) I untarred the file i downloaded ("MP190_RPM_drivers.tar")
2) Inside there are 2 more tar files
- MP190_RPM_printer.tar
- MP190_RPM_scangear.tar
3) Trying at first to install the printer functionality, i untarred the "MP190_RPM_printer.tar" file and i got 3 more files
- cnijfilter-common-3.00-1.i386.rpm
- cnijfilter-mp190series-3.00-1.i386.rpm
- cnijfilter-common-3.00-1.tar.gz
4) I tried clicking the file "cnijfilter-common-3.00-1.i386.rpm" but it gives me an error saying:
Code:
Subprocess failed. Error: RPM failed: error: Failed dependecies:
libpopt.so.0 is needed by cnijfilter-common-3.00-1.i386
OpenSUSE Hardware :: How To Install A Canon MX330
Apr 8, 2010Im attempting to install a Canon MX330 as my default printer. I have made reference to several posts that deal with Canon printers and have followed them without success.
I first searched [URL] for the appropriate drivers and came up with -cnijfilter-common-3.10-1.i386.rpm and cnijfilter-mx330series-3.10-1.i386.rpm.I then issued rpm -ivh for both, but got the error message libpopt.so.0 is needed by cnijfilter.I then issued ls -l /usr/lib/libpng* and saw that libpng.so.3 wasn't found. I next issued zypper in libpng3 and then -- ln -l usr/lib64/cups /usr/lib/cups and ln -l usr/lib/cups/filter/pstocanoni /usr/lib64/cups/filter Then I issued /etc/init.d/cups restart. Finally, I entered ln -s /usr/lib/cups/filter/pstocanonij /usr/lib64/cups/filter. ls -l /usr/lib/libpng* shows ---
and smoltGui shows that the driver for the printer is still unknown.If I try to use Cups to install the printer, I can't get past the screen that asks for the driver, since my driver is not listed and I don't know how to enter both drivers as new PDDs.
CentOS 5 Hardware :: How To Install Canon Mp 160 Driver
May 8, 2009As I try to install the driver for canon mp 160 driver, I realize that canon dun't open their drivers to open source. code...
I should follow something similar to http://forums.fedoraforum.org/archive/index.php/t-144423.html, right? i.e. download the rpms and rpm -Uvh in the same directory, right?
Ubuntu Installation :: Get Canon Printer Working Wirelessly?
Apr 13, 2011after looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.
View 1 Replies View RelatedUbuntu Networking :: Install A Canon PIXMA MG5250 Wireless Wifi Printer?
Dec 30, 2010I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
View 9 Replies View RelatedUbuntu Installation :: 9.10 - Canon Color ImageClass MF8050cn Printer
Apr 2, 2010I'm using Ubuntu 9.10 64-bit on an Intel i7. I just bought a Canon color ImageClass MF8050cn laser printer and connected it to the network. I let the software pick a driver, but when I print my document goes into a black hole never to be found again. I also have a Mac and a Vista machine which can both connect just fine and print in color. So it's not the printer.
Has anyone successfully made this work? If so, what driver are you using, where do I get it if it's not in Synaptic, and what settings do I use? I checked on the Canon site, but they only support Windows and Mac. Before anyone goes there, I would like to use a non-generic driver for this if possible. I'm at work right now and the printer is at home, so I can't get specifics at the moment.
Fedora :: Install Canon PIXMA IP1900 Under F13 AMDx86_64 Plattform?
Jul 6, 2010I have installed Fedora 13 on AMD x86_64 plattform. I want to add the Canon PIXMA iP1900 printer, but cups doesnot have in the repo. (127.0.0.1:6xx). Then i visited canon-europe webpage, and i downloaded the rpm version of the printer driver. But it no works! and the printer isnot added to the repolist of cups.Who can i solve this problem in Fedora 13 ?
View 1 Replies View Related
