Ubuntu Installation :: Grub Rescue When Upgrading From Karmic To Lucid?
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
After I upgrading from Karmic to Lucid, I haven't been able to update my version further and also running apt-get shows error... Can anyone tell me why this is happening?
I had windows 7 and I just wanted to try ubuntu and I am totally new to linux, however, I installed ubuntu 9.10 using wubi and it was fine when I boot it asks me for windows or ubuntu no problems. Then it asked me to upgrade to 10.04 I agreed and installed it. After installition restrting it gave me this grub thing I don't know what to do I googled it but I couldn't fix the problem please help I need my computer soon.
Also I tried but I couldn't boot from windows or ubuntu cd.
this may help: if I printed "ls" it gives me "(hd0)"
I have just upgraded my OS from ubuntu 9.10 to 10.04.Now I'm facing problem of not having write permissions to USB drives (Pen drives).I have to use terminal with sudo to copy , move files and unmount media.
If I try to open Cinelerra from the GUI, it does nothing. If I try from the terminal I get this:
Code: cinelerra: error while loading shared libraries: libfaad.so.0: cannot open shared object file: No such file or directory I've been looking around all over the place and can't find a way past this. I really want to get it going again, can anyone help?
I've checked in synaptic and I have libfaad2 2.7-4
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager System is AMD 64 Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore. Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
I have a dedicated server running Ubuntu-server Jaunty. As you know, this OS no longer has security updates. I'm trying to upgrade it to the latest LTS (Lucid) but first thing's first: I'm having trouble upgrading from Jaunty to Karmic.
Here's the problem. I get the following when I try do-release-upgrade:
Code: $ sudo do-release-upgrade -d Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool
[Code]....
force an upgrade to Karmic instead of Lucid? (And no, sadly, re-installing is not an option as this is a server with no direct physical access)
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I recently got a Dell Netbook Mini10v with Ubuntu 8.04 preinstalled. It does not give the option to upgrade using the normal features in the GUI (as far as I can tell) how should I go about upgrading my system to 9.10?
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
I really want Python 2.6, which is not part of the standard Hardy packages. I just tried installing the Python 2.6 Linux distro direct from python.org. While I didn't see any error messages during the installation, I'm still defaulting to Python 2.5, and 2.6 installed to a different folder than 2.5.
A secondary wish: I would also like GROMACS 4.0 instead of 3.3. Again, Karmic has it as standard, Hardy doesn't.
I'm running dual hard drives in a software RAID1 configuration. My system is Linux only, so I have no Windoze compatibility issues to worry about.
Still, I've gathered that upgrading in the presence of RAID is different, and more problematic, than a standard upgrade.
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
I can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade Leyendo lista de paquetes... Hecho Creando �rbol de dependencias
I just upgraded Ubuntu Karmic to Lucid alpha 3. It works fine except for a few things that can be expected in an alpha version. Anyway, I would like to know if it would be better to upgrade to the final release of Lucid or if I should do a clean install. I don't mind losing my files and settings because there is nothing important on my laptop, but it would be nice not to.
On the 28th of April I upgraded my system (laptop with "SIS Mirage 3 Graphics" video card) from Karmic to Lucid and my screen resolution was reduced from 1024*768 to 800*600. I tried during one day to find the suitable driver but no luck on SIS web page.
I eventually found it on the followwing address : [URL]
It works very well and the resolution has jumped now to 1280*800. The only remaining and identified problem is with grub2 : my system is dual-boot (Windows XP and Ubuntu) and the "recovery" mode does not work anymore for ubuntu, I will maybe have to wait for a next update.
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code: Boot Info Script 0.55 dated February 15th, 2010 Boot Info Summary: => Lilo is installed in the MBR of /dev/sda sda1: File system: ext3
I just had a look on the Virtualbox site and thus far there is no listing for a Lucid specific release.Can I use the Karmic release or is this going to cause problems? I don't want to use the Ubuntu OSE version because I need USB support.
When will an updated version of Empathy be available for Lucid? Or is there an easy way to install the Meerkat version?
I intend to continue using Lucid for a couple years, but the version of Empathy available in Lucid has some issues with logging chats -- there's no way to disable chats from being logged and there's no easy way to delete chat logs. The current version allows one to disable logging but it's not available in Lucid, only Meerkat.
After doing clean installs of the last two Ubuntu Releases, Jaunty and Karmic, I decided to try an upgrade to Lucid. The upgrade went well and I'm satisfied with it, however I have a question about the repositories.All the sources in /etc/apt/sources.list correctly point to Lucid, but in Software Sources / Other Software I still see references to Karmic. Is this something to be concerned about? Can I (or should I) change them to Lucid?
using update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
Well the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
