Ubuntu Installation :: "grub Rescue>" Booting After Upgrading From 9.10 To 10.4?
Jun 15, 2010
I had windows 7 and I just wanted to try ubuntu and I am totally new to linux, however, I installed ubuntu 9.10 using wubi and it was fine when I boot it asks me for windows or ubuntu no problems. Then it asked me to upgrade to 10.04 I agreed and installed it. After installition restrting it gave me this grub thing I don't know what to do I googled it but I couldn't fix the problem please help I need my computer soon.
Also I tried but I couldn't boot from windows or ubuntu cd.
this may help: if I printed "ls" it gives me "(hd0)"
View 9 Replies
ADVERTISEMENT
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies
View Related
Jan 21, 2011
Update Manager showed updates available so I installed them about 1hr ago. When the update was complete I clicked the "Reboot to complete installation" button.
Upon reboot I received the following error message...
Code:
Kernel panic -not syncing : VFS : unable to mount rootfs on unknown -block(0,0)
Pid :1, comm: swapper Not tainted 2.6.35-24-generic #42-Ubuntu
I rebooted and was taken to a boot menu. Both the most current version 2.6.35-24-generic and 2.6.35-24-generic[Safe Mode] gave me the same errors so I booted the the previous version 2.6.35-23-generic
I then ran the following in the console...then did a reboot
Code:
sudo update-grub-update
The result was Grub Rescue Shell where I did...
Code:
set root=(hd0,1)
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
error: couldn't read file.
initrd.img is there but it can't be read.
View 2 Replies
View Related
Oct 10, 2010
i have using ubuntu for 3 days with no problem i have 3 operating system vista,7,ubuntu vista and ubuntu on c: drive today i want to use vista for something and when i open it on ubuntu boot menu my laptops recovery try to recover and just give an eror like:EROR with 200 punto when i restart computer i just saw eror: no such partition Grub rescue> command screen i have no recovery dvd and ubuntu cd now i left them to my friend so can i repiar it just with commands if ubuntu is demaged because of recovery screen on D: partition i have win7
i just start using ubuntu i dont know any thing about it
View 5 Replies
View Related
Mar 18, 2011
my ubuntu installation has stopped booting after i deleted and again created one of my partitions (not the ubuntu partition but my data partition). but now when i switch on my netbook it says: error: unknown filesystem grub rescue>
i used gparted live to resize. this is my disk partition structure:
[Code]....
before doing this, my ubuntu partition was /dev/sda7, the swap partition was /dev/sda 6, and the data partition was /dev/sda 7.
View 3 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Apr 11, 2010
First the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
View 9 Replies
View Related
Oct 30, 2010
I had a problem with my grub (system displayed "unknown filesystem" and then the grub rescue prompt). I then used a livecd of ubuntu 9.04 and ran fsck for a while (closed it in the middle). Grub then worked. But when i select ubuntu 10.04 it goes to the purple screen and stops there. There's some error before loading the purple screen.
View 1 Replies
View Related
Jun 5, 2010
I've got Ubuntu 10.04 installed on one partition, and Windows Vista on another. I was messing around with my partitions, and now I can't boot to either one. I just get an error when I boot up on GRUB which says "error: no such partition", and then a prompt saying 'grub rescue>'. I've read up on other people's posts, and they said that I should reinstall GRUB from a livecd, but that doesn't look like it does anything. It seems that GRUB is trying to boot from hd0,8, and that doesn't exist anymore. I can change the 'root' and 'prefix' variables to the right partitions, but the 'boot' or 'chainloader' command doesn't work. You should be able to boot from 'grub rescue>', because that's what it's for, right?
I just want to be able to boot into Ubuntu, not Windows.
PS: Sorry if I'm specifying way too much information(or not enough), I'm fairly new to forums.
View 6 Replies
View Related
Mar 19, 2011
I've tried reading other threads about grub rescue but it seems like it only works if the USB stick can actually be read. Sorry if I sound dumb, I'm really new to all of this.I installed Jolicloud (it's based off Ubuntu, apparently) to dual boot with Windows 7 which I got with my netbook. When I tried to get rid of Jolicloud, I think I accidentally deleted a partition-- now whenever I boot up my netbook, I get the black "grub rescue" screen of death.
I tried getting the netbook to boot from my USB but it won't do it. The USB light flashes but nothing happens. I know there's things in there because I can boot from the USB using my desktop. Jolicloud was initially installed from the USB so I don't know why it won't read it anymore.
View 1 Replies
View Related
Apr 30, 2011
The day that the upgrade came out (not beta, the true release) I upgraded via the Update Manager. The upgrade went great until it asked me to reset to finalize. Upon doing that, I was greeted with a less than friendly grub-rescue> screen. The materials I currently have at my disposal are a 10.10 installation disc, and an 8.04 installation disc, and a rescatux disc (super grub) that seems to yield an error upon any of the four options presented... how can I use these (both have Live CD) to fix the grub...
View 9 Replies
View Related
Jun 30, 2011
I installed Fedora on my pc over Ubuntu and now Grub wont go any further than rescue mode. (Apparently grubs boot folder was on the Ubuntu partition. Now I see why a dedicated boot partition is handy.) I used VMware to install Fedora as im currently out of CDs. VMware is setup to use the Physical HDD for the primary HDD in the VM. (I made sure VMware disabled access to the windows partitions so the guest couldn't access them.)
I am in Windows 7 at the moment and am avoiding rebooting as that will basically lock me out of the only computer I have access to. I tried running the Ubuntu LiveCD to restore grub but dont know how to mount Fedoras LVM partitions. What can I do to repair grub or at least install an MBR that is capable of booting windows? I can boot floppies and cds using VMware but am not sure what to use to fix this.
Fedora LiveCD wont mount any of the partitions to install Grub
Ubuntu LiveCD may work if I can mount the LVM partitions.
View 9 Replies
View Related
Jan 7, 2010
I have windows 7 64bit on an internal harddrive, a larger internal harddrive for storage and a 1tb mybook external for storage. I have an ubuntu 9.10 iso burned to a cd that i got from the ubuntu site and I had previously installed dual boot successfully on my other computer, a laptop.
I went to install it on my desktop as well and when i was selecting how much space to allocate i noticed it was using the mybook and not the internal. I couldn't see an option to change which harddrive it used so in my ignorance i allocated 50gigs to ubuntu on my 1tb external mybook. This was obviously the wrong decision as after restarting the grub bootloader would not open and grub rescue came up everytime after that.
I have tried booting from the cd, reinstalling from the cd, and using a windows 7 repair cd. I can't even get into non installed version of ubuntu to try and use terminal. I have spent the 5 hours on the internet trying to figure out what to do and i have no clue. I want to get ubuntu off the mybook and get back on windows 7 where i can then reinstall ubuntu properly on one of my internal harddrives.
View 4 Replies
View Related
May 7, 2010
I am sorry to post another thread regarding this problem, but after searching for hours in this forum and the internet, no suggested solution fixed my problem.I have 3 disks of 1TB in size. The first /dev/sda is where windows 7 64 is installed (partitioning: MBR).The second /dev/sdb is where I installed ubuntu 10.4 64bit (partitioning: GPT).The third is just for storage and is ntfs. No boot here.the grub2 is installed on mbr (/dev/sda)Also did a update-grub just to be sure, and testdisk.Grub finds all the oses and sort the to the list (including windows 7).Upon selecting Ubuntu, ubuntu boots fineBut If I select windows 7, I get a blackscreen and a blinking cursor on top left. No disk activity.I had a similar problem booting windows 7 when I had installed 9.10 in the past. The fix was to add the line:echo insmod part_msdoson the /etc/grub.d/00_header file because grub was inserting only the part_gpt module thus not recognizing the mbr partitions.
This is not a solution anymore.Trying to have a fix at least to boot into windows 7 using the windows disk, using repair, and command prompt as suggested somewhere here on the forum, did not solve anything. On the Repair dialog on start, windows see the installation, I choose fix, and it ends up that there are no problems to fix. After going to console, and issuing The BootRec commands, the /ScanOs and /RebuildBcd, say there are no windows installation. Great work Microsoft!. The installation is found on gui screen, but not on console.I did a clean install from the ubuntu 10.04 cd, just to see if solves the problem. but no. Same thing.And a stupid thing I did on update: I checked to install grub on every disk (just disks not partitions), when grub-config window showed up. Don't ask me why, I ask myself and I don't get an answer.Anyway, as I said, at least ubuntu boots fine and all disks are accessible. So, fortunately no data loss. The windows 7 option available on the grub menu ends up in a blinking cursor.Just in case, here is the results of my boot info script:
---------------------------------------------------------------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 6 Replies
View Related
Jun 26, 2010
I downloaded Ubuntu 10.04 Desktop and have tried booting the ISO from a USB stick and also installing it to my HD with Wubi.Unfortunately my experience hasn't been any better than when I tried Ubuntu 8.10When booting the Live iso from my USB stick, my display goes into sleep mode (IE is receiving no signal) from the momentUbuntu begins booting until eventually the desktop appears several minutes later. If I was the average punter I would probably have assumed nothing was happening and rebooted.
As I have some experience with Linux (barely), I thought to try Ctrl-Alt-F1, which brought the monitor back to life and showed the terminal. As soon as I switched back to the main window (Ctrl-Alt-F8 I think) the display went back into sleep mode.Once it had booted, I did "sudo apt-get update", which worked and then "sudo apt-get upgrade", which did a lot of updates and then sent my monitor back into sleep mode, requiring me to reboot!When I tried to boot the Wubi install, again the display went into sleep mode as soon as Ubuntu started booting but this time the desktop never appeared and after about 5 minutes I rebooted.My motherboard is a Gigabyte MA780G-UD3H and I'm using the onboard HD3200 IGP and a Phenom II X3 720 and 4GB DDR2 1066Mhz RAM.
View 2 Replies
View Related
May 19, 2010
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
View 3 Replies
View Related
Feb 6, 2010
I just installed Ubuntu 9.10 on hd1 - /dev/sdb1 at the end of the installation I chose to install grub at hd0 - /dev/sda1. The file system I chose was ext4 for ubuntu "/" - 50 GB,
ext3 for "/home" - 5 GB, and 1.5 more for swap. When the installation was complete I got the following prompt:
GRUB loading
error: no such disk
grub rescue>
>
There was nothing I could do, pressing TAB did not show me all the commands like grub is expected to. Typing 'help' did not show any commands as well, instead it showed me - "NO SUCH COMMAND" or something like that (I did not took note of what the output was). I believe the problem is in the grub loader - which was not really installed properly in hd0 - /dev/sda1 (which is FAT32 - windows)
View 9 Replies
View Related
Feb 11, 2010
I had windows XP and Ubuntu installed on my Asus 1000HE and the hard drive is failing so I need to RMA it. They told me to restore it to factory defaults which I just press F9 at boot 3 time and Ghost takes over and reformats, creates 2 partitions and installs XP on one of the and the other is for another OS or just storage if needed.
I did that now I get a grub rescue prompt when I boot my netbook. Is there a way that grub installed itself to my PE partition that's a hidden partition that came with the netbook? I've taken the drive out of the netbook and put it into my desktop and formatted both main partitions but not the restore one. Yet I still get the grub rescue prompt, how can that be?? I can't even boot from flash drive or get to bios it just goes straight to the rescue.I need to send the netbook back but can't unless its restored. Right now I'm on the 9.10 live flash drive I made on my desktop and my only hard drive attached it the netbooks.
View 4 Replies
View Related
Mar 9, 2010
i get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
View 9 Replies
View Related
Mar 18, 2010
I tampered with installation process while I was reinstalling ubuntu, now I have this command on my screen and I'm stuck.
GRUB RESCUE>_
What do I need to type, to continue installation.
View 1 Replies
View Related
Mar 21, 2010
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies
View Related
Jun 19, 2010
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
View 6 Replies
View Related
Sep 10, 2010
I have ubuntu in sda7. sda6 had bt4, sda3 had Win7. From Win7 I removed sda6. Now when I start my computer I get grub rescue. How can I tell grub that ubuntu in sda6 and not in sda7 anymore or how can I create sda6 again so ubuntu goes sda7.
View 1 Replies
View Related
Sep 23, 2010
Here is a brief history of my problem:
-Ran Windows XP Media Center for most of the life of this HP Pavilion notebook with 2 hard drives, C: and D:, no partitions except the default HP recovery partition
-Yesterday, installed Ubuntu 9.10 through Wubi on D: from an ISO (because the CD drive doesn't work). I assigned it 30gb on D:, which I assume created a 30gb FAT32 partition on this secondary drive.
-Dual booted successfully from Grub between XP and Ubuntu, so I thought, "Mission accomplished" and started making friends with GNOME. Got a pretty good score in Tetris.
-Was asked if I would like to update to the latest Ubuntu (10.04 I think?) which struck me as a good idea. Everything went smoothly until it asked me to reboot.
-Reboot brought me to a command-line that says "grub rescue>" and above it says "error: no such device: e76e00f3-........" (there's more, I can write it out if that helps)
-Rebooted several more times (cause that usually fixes things) but just got back to "error: no such device: ..." and "grub rescue>"
And that's where I am now. I have almost no experience with how Linux (UNIX?) works differently than Windows or how to use the command line. I know that the hard drives are (hd0), (hd1) instead of C: and D: and that everything important seems to start with "sudo" and that's about it. I was going to ease myself into the whole thing gradually, picking up little bits as I go along. But now I'm just stuck in command line limbo and none of my usual troubleshooting strategies apply here, not even yelling rude things about the computer's manufacturer.
View 9 Replies
View Related
Nov 30, 2010
I am reading spc456's thread with the same subject line and trying to work through the thread with suggestions by drs305.
My situation is very similar. It started with a sudden Windows boot problem (still my primary OS):
Quote:
This was only if I selected Windows from the boot menu. I thought I could cure it with the Windows-7 Repair Disk from neosmart.net. This appears to have wiped my Boot partition completely and now I can't boot anything. (I'm using the Ubuntu 10.10 live as I type this.)
I downloaded boot_info_script055.sh and here are the RESULTS but I don't know what needle to look for in that haystack.
Code:
Boot Info Summary:
Well, I see why the Windows boot didn't show up. Looks like 30-OS_prober was failing to find the Windows boot record, which makes sense if the whole blessed (ahem) boot partition has been hosed.
I tried to follow the grub-install instructions:
Code:
But since grub2 is obviously not going to find the Windows boot record, I will continue with drs305's.
Code:
No, I have not mounted /dev. Where would I do that? Against which FS?
In any case, I am now printing the article "How to restore the Ubuntu/XP/Vista/7 bootloader" to see if I can get that going.
To my dismay, I discovered that the disk supplied with my Dell machine is NOT a Windows Installation disk, so no straightforward "fixmbr" command will be possible at this time.
I'll let y'all know how I have fared with this. I am sceptical because it's not merely the master boot record that has gotten corrupted but the whole blessed (have I used that adjective already?) boot partition.
View 4 Replies
View Related
Dec 11, 2010
Trying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code:
error: out of disk.
grub rescue>
I tried using following some instructions i found after googling for the problem:
Code:
ls (displays the partitions and devices Grub can see)
set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
View 2 Replies
View Related
Dec 15, 2010
So earlier today I was running out of space on my regular Windows 7 partition and I played around with extending it. I ended up somehow deleting grub and messing up my entire system. I've spent the last 2 hours looking for the answer to this and everyone has been saying to boot from a live disk and fix it that way.
Well, I've tried everything, the only way I can boot right now is via USB and it will NOT allow me to. I checked on other computers and even re-installed and formatted by external hard drive to try and get it to work and it refuses. I've changed my BIOS to boot from USB so I have no idea as to why this is happening. Also, I've tried using the "ls" command to find my partition via "ls (hdX,Y)/" and all of them come up as unknown filesystems.
View 9 Replies
View Related
Feb 9, 2011
I am new to ubuntu OS, I am having quiet a hard time solving out certain problems. I have Ubuntu 10.10 and Win Xp installed on the same hard drive partition i.e. C drive. Now yesterday accidentally I deleted a folder from C while I was logged in to Windows. Now today when I restarted my pc I got this error message :
error : No partition found
grub rescue>
Then somehow I managed to reinstall the Grub loader. Now whenever I restart my PC I get this error message :
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub>
View 1 Replies
View Related
Mar 28, 2011
i have a dual booting the first one being ubuntu 10.04 within which i have installed windows7.Unfortunately,i've formatted that part of my hard disk in which i've had ubuntu. Now my problem is i cant load into any of the two os and i dont want to loose my vital data in the system.I've tried booting using the live CD but in vain.i desperately need my info in my laptop.
View 3 Replies
View Related
Mar 29, 2011
I just installed Ubuntu on a separate hard drive alongside Vista, and after restarting, my computer booted to a screen that said, "error: no such device: xxxxx-xxxx-xxxxx-xxxx (I don't remember exact number, if I need them I'll go back and write em down) grub rescue>"
After a bit of searching I found this thread: [URL].. I tried the first part twice which didn't change anything, so I tried the last part which was too fix the vista bootloader, which worked perfectly, and now I can get into at least one operating system. Would anyone please help me get a bootloader working so I can choose between Ubuntu and Vista? Also, is it worth mentioning that right before the computer shut down after installation, I had a huge list of I/O errors?
EDIT: After further searching I read that the I/O errors were commonly because of a faulty cd or it was spinning too fast. I think my problem with that was that it was spinning too fast, it was incredible loud and there was a huge amount of wind coming out of my computer XD. iirc I have to go to the BIOS to change disc speed?
EDIT2: I think all my problems stem from a faulty CD. I remember setting the burning speed too the highest setting when I burnt the live CD, I guess I thought faster was better.
View 9 Replies
View Related
