Ubuntu Installation :: Upgrading From FC To Karmic On Triple Boot Mac
Mar 14, 2010
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
View 2 Replies
ADVERTISEMENT
Jun 8, 2011
I have a dedicated server running Ubuntu-server Jaunty. As you know, this OS no longer has security updates. I'm trying to upgrade it to the latest LTS (Lucid) but first thing's first: I'm having trouble upgrading from Jaunty to Karmic.
Here's the problem. I get the following when I try do-release-upgrade:
Code:
$ sudo do-release-upgrade -d
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
[Code]....
force an upgrade to Karmic instead of Lucid? (And no, sadly, re-installing is not an option as this is a server with no direct physical access)
View 4 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
Mar 19, 2010
I recently got a Dell Netbook Mini10v with Ubuntu 8.04 preinstalled. It does not give the option to upgrade using the normal features in the GUI (as far as I can tell) how should I go about upgrading my system to 9.10?
View 2 Replies
View Related
Jun 18, 2010
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
View 9 Replies
View Related
Jan 30, 2010
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
View 9 Replies
View Related
Jan 24, 2010
I really want Python 2.6, which is not part of the standard Hardy packages. I just tried installing the Python 2.6 Linux distro direct from python.org. While I didn't see any error messages during the installation, I'm still defaulting to Python 2.5, and 2.6 installed to a different folder than 2.5.
A secondary wish: I would also like GROMACS 4.0 instead of 3.3. Again, Karmic has it as standard, Hardy doesn't.
I'm running dual hard drives in a software RAID1 configuration. My system is Linux only, so I have no Windoze compatibility issues to worry about.
Still, I've gathered that upgrading in the presence of RAID is different, and more problematic, than a standard upgrade.
View 1 Replies
View Related
Apr 17, 2010
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
View 7 Replies
View Related
Jun 7, 2010
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies
View Related
Sep 10, 2010
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
Feb 5, 2010
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
View 4 Replies
View Related
Sep 11, 2010
I have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies
View Related
Dec 21, 2010
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies
View Related
Jan 14, 2010
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies
View Related
Mar 14, 2010
I recently installed ubuntu onto a pc running MS vista. Then I somehow managed to install a second instance of ubuntu. Both of these were on the (drive e Then because of HDD problems, I had to reformat my original drive with MS Vista (drive C). Because of installation problems with ms vista - I ended up installing it onto the drive e: also. But now I can no longer load ubuntu because the "GRUB" loader is missing. So my questions are:
1: How can I restore the "GRUB" loader? So I can access ubuntu again
2: How can I remove/uninstall the second ubuntu installation?
3: Is it possible to have a triple boot system with ms vista / ubuntu 32-bit / ubuntu 64-bit?
View 5 Replies
View Related
Apr 29, 2010
I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
View 2 Replies
View Related
May 12, 2010
I just upgraded to lucid lynx from karmic koala 64 bit. During the upgrade it complained about grub not working. It said if i didnt know what drive to mount i had to select all of them, which i did. Did i now damage my triple boot ? i had also win7/ winxp on my hd, but altho it says windows 7 in the grub menu if i select it nothing happens just a cursor blinking. I can get into Ubuntu okay. I looked at the forum here and saw someone being advised to get Bootinfo script.
[Code].....
View 9 Replies
View Related
Jul 30, 2010
I have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
View 4 Replies
View Related
Sep 20, 2010
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies
View Related
Nov 10, 2010
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies
View Related
Jul 31, 2011
I would like to triple boot vista, opensuse and ubuntu.
I need to set aside 165 gb for Vista (which has been backed up to an external drive).
Would like to make a fresh install of Ububtu and Opensuse with Ubunto being the main OS. I figured 100 GB for Ubuntu and 55 GB for Opensuse would probably be fine (the remainder I need to set aside for Vista).
Ive popped in the Ubuntu DVD and am about to install it but am stuck on the "allocate drive space" part. I do not understand how to partition the hd and what to set each partition to in the "Use as" and "Mount Point"
View 3 Replies
View Related
Aug 22, 2009
I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.
sda contains both my Windows and Ubuntu partitions...
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x07dccf10
[Code].....
View 3 Replies
View Related
Mar 11, 2009
I have a dual boot with vista on disk 0 and ubuntu on disk1. I just installed a disk 2 that I would like to use to try out other distros. Ubuntu is the only linux experience I have had. I'm really not very good at all of this, so my questions before I start loading another distro are:
1. Does Fedora use GRUB as its installer?
2. When I installed ubuntu on disk 1 (sdb1), the install was very simple. I chose sdb1 for the install, it loaded it, and when it was done I simply had the choice of which drive to boot into. Will installing Fedora on disk 2 (sdc1) be just as simple, or will I encounter steps I must take to make it so that I have a choice of which disk/OS to boot into?
View 3 Replies
View Related
Oct 2, 2009
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
View 1 Replies
View Related
Jan 27, 2010
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies
View Related
May 25, 2010
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies
View Related
Jan 17, 2010
I think I've got myself into a bit of a situation. I've got 3 operating systems across 2 hard drives, and i need to get them loading properly.
I have my primary ubuntu 8.10 install @
/dev/sda1
I have a new Windows XP install @
/dev/sdb2
And I have a new install of Ubuntu 9.10 @
/dev/sdb3
I'd like to be able to selectively boot into all 3 until I can return my current 8.10 install. Can someone show me how to get my /boot/grub/menu.lst file in order?
View 4 Replies
View Related
Jan 22, 2010
I was able to install Windows 7 64 bit and ubuntu 9.10 along with Mac OS X (10.6) to my MacBook Pro 3,1 (Santa Rosa). Some minor issues remain to be addressed, but all three OSs are functional. My question relates to the rEFIt menu where I only see Mac OS X and Windows as available options, unless I happen to have the ubuntu Live CD inserted or my external drive attached which result in Penguin and/or additional Mac icon, respectively. I get to ubuntu or Windows through the Windows icon in rEFIt, then select one or the other from a long menu in grub, with ubuntu set as the default. BTW: The included OS X option doesn't work from here, of course, and I'd like to remove it at some point since I can't use it, but that's even less important at the moment.
I get "Error 15: File not found" when I try "find /boot/grub/stage1" or "find /grub/stage1" from within the grub utility, as suggested by a previous poster as a start to discovering and relocating the grub loader in order to change the boot behavior. Manually I can navigate to /boot/grub, but I am not at all sure if this is the same thing. With everything essentially working, I don't want to trash what I have. But it would be convenient if I could select Mac OS X, Windows, or ubuntu directly from the rEFIt menu. I am not frightened by command line work but have somewhat limited experience and will welcome any constructive input. I saw posts on this topic dating back to 2008 or early 2009, but current topics didn't seem to match up. I'm also new to posting here and ask for you patience if I am not approaching the forum in the correct way or location.
View 3 Replies
View Related
May 28, 2010
I'm currently running Hardy and XP in a dual boot setup. I want to install Lucid but don't want to overwrite my working Hardy partition and am worried by the number of reported problems with Grub2. XP is currently taking up all of my first hard drive. Second hard drive is : Hardy, then swap, then separate /home. After a bit of research, does this sound like a good plan ? ...
- Use gparted from the Live CD to shrink my Windows partition (then make sure XP still boots OK )
- Create a new partition after XP on drive 1
- Install Lucid in this new partition, using Advanced option, and tell it use my existing swap and home partitions on drive 2 (with no format, of course)
- Write Grub to this new partition
- Boot Hardy, and edit grub manually ( or use StartUp Manager, will it detect Lucid and add it as an option ? )
- Reboot and get options for Hardy, XP, and Lucid.
Does that sound correct, especially the Grub bits? When I'm happy that Lucid is OK I'll probably install Grub from it to the MBR.
View 5 Replies
View Related
