Ubuntu Installation :: Dual Boot During Partitioning - Got Only Three Options In Cd
Jan 29, 2010
1. I have windows xp on my notebook compaq presario v2000.
2. Wanted to load linux as dual boot.
3. Tried with Suse linux, but there was some blank or black screen problem after installation.
4. Someone suggested Ubuntu linux.
5. Downloaded and burned ubuntu on a cd.
6. But this time during installation during partitioning there was a serious problem.
7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd.
8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space".
9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook.
10. So any comment why the dual boot partitioning option was absent in my ubuntu cd.
11. Or there is some thing to be activated in my notebook setting to enable dual boot.
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
I just installed a dual boot win7-Ubuntu 11.04. When I reboot, there is no list of OS options displayed, it just boots to windows. Below are the details of how I got to this point.I Used GParted to delete all partitions off a hardard drive. Then installed win7 from CD. Win7 works fine. Then I formated an ext4 partion and installed Ubuntu 11.04 from the iso CD. But on reboot I don't see a list of OS options. When I boot from the Ubuntu 11.04 CD, I can view the usual Unix directories in the hard drive Ubuntu root (bin, etc, lib, usr, var) and the /boot/grub directory. So Ubuntu looks like it got installed. What else can I trouble shoot to get the list of OS options displayed?
I recently installed Ubuntu and thus am now dual booting it with W7 (which was installed first). These are the options I get with Grub:
Ubuntu, Linux 2.6.31-16-generic Ubuntu, Linux 2.6.31-16-generic (recovery mode) Ubuntu, Linux 2.6.31-14-generic Ubuntu, Linux 2.6.31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200) Windows 7 (loader) (on /dev/sda1)
I'm not sure if there is something wrong with this; why is there an option for Linux 16 and then for 14? At the moment I'm booting into Ubuntu using Linux 16. I'm a sticker for looks and would prefer reducing it down just to: Windows 7 Ubuntu
clarify the outcomes of the four step 4 options. I have sda1 - 15GB; sda2 - 106.9MB; sda3 - 163.8 GB; free space 141.1GB on a brand new machine - no user files or programmes to worry about.
I want: dual boot up choosing between ubuntu and Windows 7 at start-up, "my files" (presumably equivalent to ~/home) to be available to both windows and ubuntu and to be "separate" for no "second guessing" back-up AND no problem ubuntu (and windows I suppose) upgrades.
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7) Delete Windows /dev/sda3 70 GB although 40 GB are free Create Extended /dev/sda2 140 GB Create swap /dev/sda5 2 GB even though I have 4 GB RAM Create Root /dev/sda6 20 GB ext4 Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
I can access the folders that I have created in XP. What I would like to know is whether or not it is possible to share or link folders between the two OS. For example, I try to keep my files organized as best I can and had been keeping pictures in my XP "My Pictures" folder, but have to do a bit of directory digging to get to that same folder from Ubuntu.
I referred to this video, to install ubuntu(NOT on windows partition) and also run windows XP, and im well enjoying ubuntu. i have some hard-disk issues, and i'm going to format the whole hard-disk. I will format and repartition using windows xp installer. I'm leaving 20 GB for ubuntu. So I can install ubuntu in 2 ways...
1) While re-partitioning, i can leave 20 GB unallocated and later put ubuntu there
OR
2) Install windows XP the normal way, and then allocate 20GB for ubuntu using GPART - by shrinking a windows partition. (as shown in video)
For the GParted partitioning options, when creating or changing a partition on a SATA hard drive, which option is best to use; (align to cylinder, or to MiB )? The newest version of GParted I used, and it did default to "align to MiB, which then created 1 MB gaps between some partitions. Is it better to have no gaps, and is this new version safe to use to move and or resize NTFS windows partitions ? Will it include the boot sector when it moves or resizes ntfs ?
I usually use Ubuntu as a way of accessing my hard drive when Windows 7 crashes. I now want to reinstall Ubuntu on my hard drive as a seperate OS on its own partition.
I installed Windows 7 already, and I allocated about 60gb for Ubuntu. The problem now is manually arranging the different options in the Ubuntu partitioning menu. I tried the automatic installation but I was unhappy with the fact that it merged my W7 and the Ubuntu installation on a partition.
Here's the situation: I have the newest release of Ubuntu running in dual mode with a constantly failing Windows XP. I installed with GRUB and had no issues, but wanted to have access to the Windows files from Ubuntu (it did a logical partition and I couldn't locate any of the Windows files), allocate more space to Ubuntu and make the dual mode more efficient. Last night, I read up on how to do these things, went to GParted to briefly look at how the partitioning process would work. I believed that I took no action, shut down, and now the computer won't boot. It brings up the HP load screen with the Boot Device Menu and ROM Based Setup but immediately goes to a black screen with a flashing white bar. I tried restoring my defaults in the BIOS and I tested the RAM and HDD, each failing to resolve my issue. I'm assuming that whatever I've done is keeping the computer from knowing where to boot from.
To structure the layout of my partitions. I'm installing Windows 7, Backtrack 4 R2 and Ubuntu 10.10 Desktop on my laptop. I've got a 500 GB HDD named sda.
I've already installed Windows 7. It's my opinion that it's easiest to begin with Windows.
The partitions look like this right now:
The Windows installation is unencrypted and I want it to stay that way. It's only there in case my laptop gets stolen, I've installed various nasty things there.
The Backtrack 4 installation will also be given 100 GB space, I want it to be encrypted. The Ubuntu installation should get the rest of all the remaining space and preferably be encrypted but it's not 100% necessary.
How I should partition this? There's a limit on 4 primary partitions? How do I circumvent this? There should be one dedicated GRUB partition which will point to each of the installations own boot loaders?
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
my two partitions (ubuntu and WinXP) worked fine, i always had a boot option at startup. however, my Win boot option simply disappeared. I did not do any update recently, so I do not really understand what could have happened. My /media/windows is also completely empty. when i try to open the windows partition, it says "could not mount".
I've recently been trying to attempt to install Ubuntu on a partition on my macbook pro OS X 10.6.6. I have attempted to create a bootable USB stick (as I currently do not have any CD's/DVD's to use). I have followed the guide on the Ubuntu installation page twice, word for word, command for command. Everything goes flawlessly, all the files are visible on the drive when I checked, and I have never received any errors in the terminal. The problem arises when I attempt to boot from the USB, it simply does not appear under the options when I attempt to boot. I have also checked the Start up Disk under system preferences.
I have attempted the installation on two different USB sticks, and the same problem on both, flawless to install to USB, but then it is somehow not booting. I have checked with the USB company and directly from the website it says that the PNY attache is capable of this. It is the 4GB model.
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
