General :: Partitioning For Dual Boot OpenSUSE And Windows 7?
Jan 25, 2010
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
1. I have windows xp on my notebook compaq presario v2000. 2. Wanted to load linux as dual boot. 3. Tried with Suse linux, but there was some blank or black screen problem after installation. 4. Someone suggested Ubuntu linux. 5. Downloaded and burned ubuntu on a cd. 6. But this time during installation during partitioning there was a serious problem. 7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd. 8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space". 9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook. 10. So any comment why the dual boot partitioning option was absent in my ubuntu cd. 11. Or there is some thing to be activated in my notebook setting to enable dual boot.
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
i have a toshiba laptop running Windows 7 64 bit and i would like to install openSUSE 11.3 64 bit on it. I downloaded the DVD version and would like to know how i should do it.
My main os, albeit only because of gaming, is windows 7, and I was looking to dual boot with 11.3. I couldn't find any documentation of this, so here it goes: Does the executable on the 11.3 disk install opensuse like wubi does ubuntu?
I am trying to dual boot windows 7 and openSuse. I have shrunk my main partition and it is now unallocated. When running the DVD at the disc section I got the message Delete partition /dev/sda1 (199.00MB) This is my windows system partition (NTFS)
Delete windows partion /dev/sda2 (261.49GB) This is my main partition C: (NTFS) (Don't want to delete this Resize impossible due to inconsistent fs. Try checking fs under windows. Delete windows partition /dev/sda3 (16.31GB)This is my recovery partition.(NTFS) I also don't want to delete this. Resize impossible due to inconsistent fs. Try checking fs under windows. Delete partition /dev/sda4 (103.34MB) HP tools (FAT32) (Not sure about this, but would rather keep it.
Create swap volume /dev/sda1 (2.01GB) Create root volume /dev/sda2 (20GB with ext4) create volume /dev/sda3 (276.08GB for /home)
I also pressed created partition and clicked on the unallocated space but I got an error telling me that I either didn't have enough space or hadn't selected enough partitions. (The unallocated space was 20GB)
I have installed openSuse 11.4 and works perfectly. The main problem is, I have another system on my HD, Windows XP, and unable to boot to my XP system. If I choose Windows on Grub menu, its just show me the same text as in the menu.lst at Windows' section. I am able to boot in Windows, by adding 'makeactive' but then, I unable to see the grub menu. And to boot to oS again, I must insert DVD installer and made an update. How tiring.
Yesterday (Sept. 28) I managed to install openSuSE 11.3 on my Toshiba Satellite Pro C650 laptop, side-by-side with Windows 7 which was pre-installed. In brief I'd like to report the problems I had encountered up to yesterday.
1. Upon inserting the DVD and after the start of the installation the system would take me to non-GUI (Text) Mode and would finally respond with the message: "No repository found."
2. After that I tried to install openSuSE 11.2 and 11.1. There, although the installation went through smoothly, I had to deal with a new problem; when I selected to boot Windows 7 from the grub menu the system responded with the message:
rootnoverify (hd0,1) chainload +1 BOOTMGR is missing
Upon booting the computer from the DVD with the Linux OS and before I hit ENTER I changed the Kernel by hitting F5 (or whatever key corresponds to Kernel at the bottom of screen) to "Failsafe mode". That did the job. The installation started and ended smoothly. Oh! one other thing I did is to edit the preselected disk partition and delete the swap partition since the disk has to have four and not five partitions.After that, I became root and edited "/boot/grub/menu.lst" file to correct the "(hd0,1)" for the Windows 1 to "(hd0,0)" since it is the first OS.
I am very much excited to try out openSUSE 11.3.. But i am very much afraid of losing my data in windows partitions without knowing the exact procedure to install it..here are my existing partition list... Please have a look at it and suggest me..
c : 40 GB d: 120 GB e: 140 GB f: 140 GB
and i have some free space of 28 GB.It is unallocated.I want to install openSUSE into this free space.Now please tell me whether i can proceed with the default disk configurations given at the install time or do i have to modify and adjust the partitions or do i have to create partitions for the available free space.
I'm doing some research for a friend who wants to dual boot Windows 7 with a Linux Distro that has Perl inbuilt & also supports .MP3 and other popular codecs "out of the box"
From my limited research, OpenSUSE seems to fit the bill (as does Mandriva Powerpack).
Also, how easy is it to create a dual-boot with Windows 7 with this distro?
i have openSUSE 11.3 as my primary OS. and i want to be able to dual boot windows vista. from what i read i would have to reinstall the 11.3 to set up to dual boot. i may have that wrong.
I tried a lot of distros and the one who i liked was openSUSE, I really liked it! And now I want to install openSUSE in my PC, but, there's two problems.
1- I need to keep Windows Vista, because i am the only onein my house who knows how to use a linux (at least, use a little bit, hehe). 2- I don't know how to make a dual boot with Vista and openSUSE.
I want a tutorial showing me how to make the Dual Boot (Windows Vista x openSUSE), and, if possible, with screenshots.
My Laptop runs on Windows vista.And I just downloaded Opensuse 11.4 KDE in want to Dual Boot So I first Created around 25GB of Unallocated Space Using Disk Management in Vista and Ran SUSE live from a CDROM But i cant seem to understand the disk partition and where suse will be installed.I want to install suse only in my unallocated space.How come other distros automatically detect unallocated space.Please help.Used to tun linux virtually but i thought i'll dual boot it
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
