Ubuntu / Apple :: Undo Partitioning / Dual Boot?
Jan 31, 2010
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
View 4 Replies
ADVERTISEMENT
May 16, 2011
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
View 2 Replies
View Related
Feb 24, 2011
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
View 5 Replies
View Related
Jan 10, 2010
I have a new win7 system with a 500GB HD. What is considered the safest way to partition the disk before installing Ubuntu?
View 9 Replies
View Related
Jan 29, 2010
1. I have windows xp on my notebook compaq presario v2000.
2. Wanted to load linux as dual boot.
3. Tried with Suse linux, but there was some blank or black screen problem after installation.
4. Someone suggested Ubuntu linux.
5. Downloaded and burned ubuntu on a cd.
6. But this time during installation during partitioning there was a serious problem.
7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd.
8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space".
9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook.
10. So any comment why the dual boot partitioning option was absent in my ubuntu cd.
11. Or there is some thing to be activated in my notebook setting to enable dual boot.
View 1 Replies
View Related
May 1, 2010
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
View 3 Replies
View Related
Mar 1, 2011
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
View 9 Replies
View Related
Jan 25, 2010
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
View 11 Replies
View Related
Oct 13, 2009
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
View 3 Replies
View Related
Sep 23, 2010
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
View 7 Replies
View Related
May 16, 2010
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
View 5 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
Jan 2, 2010
I don't want to dual as I don't want to screw up my computer. I have a PowerPc mac.
View 3 Replies
View Related
Aug 12, 2011
where I can find details on how to dual booth OSX 10.6.8, and Ubuntu 10.10 on Mac Mini 2010?
I have the partition already setup for Ubuntu - and have already installed refit - but when I try and boot from the Live CD, the screen goes into power save mode and I can't see anything.
View 1 Replies
View Related
Jun 11, 2010
i am attempting to setup a macbook run by os x 10.5 for dual boot with ubuntu 9.10.
however, when get the part where usually a gui interface which allows one to specify the size of the new ubuntu partition appears i only get the options for using the entire disk, the largest free space or manual partition.
how can i set this machine up for dual boot?
View 2 Replies
View Related
Jul 6, 2010
I've been using Ubuntu on my PCs and laptops for quite a while. Recently, I've been allocated a Mac for use in my lab. It is a PowerPC G5 running on Mac OS X 10.4.11. I've installed Ubuntu on one of the two hard disks available, the other one being the disk which Mac is installed in. There was no problems with the installation, but I cannot get Ubuntu to boot. Basically, when I restart the system, it boots into Mac straight away.
There is no boot loader or GRUB. I've tried holding down the options key when the system starts, but for some unknown reasons, the monitor cannot find a signal, so I cannot see what is going on. The monitor can only pick up a signal after Mac starts to boot (or, when I was installing Ubuntu, after the virtual Ubuntu has loaded). Am I suppose to expect GRUB or some other boot loader?
View 9 Replies
View Related
Jan 26, 2011
I have one machine in my house which doesn't run Linux, and that is a new iMac (a few months old). It has 4GB DDR3 Ram, an intel core i3 chip @ 3.06GHz, and a ATI Radeon HD 4670 graphics card.I want to dual boot Ubuntu (I have a disk with Maverick on it).But I have read the wiki and I dont really understand alot of it. Right at the beginning, it says:"This information will not work for iMac (11,1) users and recent versions of Ubuntu (e.g., Maverick). The presence of the bios-grub partition that the Ubuntu installer creates by default (e.g., sda3) causes a conflict that prevents syncing the GPT and MBR partition tables."Does this mean that I can't dual boot Maverick? What does it mean by 'iMac(11,1)'?
View 9 Replies
View Related
Apr 29, 2011
I have a Macbook Pro, with ubuntu as the ONLY OS, there is no dual boot. I bought the mac long ago and recently got fed up with OS X, so i removed it for unbutu. i've been having random troubles with it but have for the most part been able to figure it out by reading forums however, my computer will not boot now.
From power off:
Push power button
Screen becomes grey for about twenty seconds
screen becomes black
sometimes flashes the underscore in the top right corner once
screen goes black
no change thereafter
I was playing Warcraft 3 (running on WINE) when I left it, the CD is still in the disk drive. I cannot eject it, I can not get to a log in screen, I can't do anything. Nothing I have attempted has affect the computer what so ever, except the power button as far as I can tell.
View 2 Replies
View Related
Jun 23, 2010
Having successfully installed kubuntu 10.04 on my Powermac G5 I was wondering if I can install os x and dual boot, there are plenty of tutorials around but all of them involve installing kubuntu on a system with os x already installed. If there is any danger of damaging Kubuntu then I will leave it as I really don't want to go through the hell of getting it working properly again! Also I have plenty of hard drives kicking about - would it be safer/easier to install os x on it's own hard drive? And if so how would things work with yaboot?
View 2 Replies
View Related
Jun 28, 2010
I want to dual boot mac and ubuntu. Now, if I want to remove the ubuntu partion, how do I do so? (I have not yet installed Ubuntu)
View 2 Replies
View Related
Nov 16, 2010
Last night I installed ubuntu 10.10 unto a macbook pro 5,5 following the instruction from the MactelSupportTeamAppleIntelInstallation however I made a mistake during the installation process. I forgot to go into advance settings and choose to install the bootloader on /dev/sda3. I'm not exactly sure why this step was needed since everything was working fine anyways, but I was wondering how can I remove the bootloader from /dev/sda and install it on /dev/sda3 without breaking anything. [URL]...
View 2 Replies
View Related
Jan 7, 2011
I tried burning straight to the CD after download Ubuntu. It wouldn't boot from the CD. Can anyone explain the steps I need to reproduce to make this happen?
[Code]....
View 1 Replies
View Related
Jul 5, 2010
I installed Ubuntu 10.04 lucid lynx 64bit on my mac pro in a dual boot setup with os x. When installing I had some trouble figuring out the partitions, especially because the thing happened with the extra partition from nowhere. I deleted the small partition created by the installer, synced the GPT and MBR, installed GRUB on /dev/sda4 and all was fine.
After my first software update my system is now broken, after rEFIt it got stuck on a black screen. I started up from the livecd, chrooted into my system, reinstalled GRUB on /dev/sda4, installed it on /dev/sda too, but that did not really help. I now get to the GRUB rescue shell, but I'm pretty clueless what to do. Also it does not seem a widespread problem, since I didn;t find many reports of dual-boot macintels breaking with this update. What can I do to restore my linux system ?
View 3 Replies
View Related
Mar 10, 2011
I have a Macbook 7.1 (the white one)
2.4GHz Intel Core 2 Duo
2GB DDR3 memory
250GB hard drive
I'd like to install Ubuntu on it because I really love the way Ubuntu is developing and becoming much more user friendly. My use will mainly be for browsing, working with wordprocessors and maybe downloading series from torrents. My question is, should I dual boot or single boot? My personal preference is to single-boot, I just like the idea of having one OS running on the machine. What are the cons of doing that? Also, If I want to dual boot just to keep the firmware updates. How much space should I designate for Ubuntu and how much for Mac OS?
View 2 Replies
View Related
Jan 9, 2010
I currently have an old powermac 7220/200 with all ehe origanl stuff except for the hard drive which is now a slightly larger one. I was wondering if it was possible to set up a ubuntu installation on it using a 20g hard drive (I have got one of these going on a 486 running win98, just) and be able to run mac os as a dual boot system, possibly with 9.1 and the origanal mac os that come with it? Unfortunantly I cannot connect this computer to any internet even if I had a card that was compatible with mac os.
View 9 Replies
View Related
Feb 28, 2010
I'm going to put Ubuntu on my thumb drive. It's a rather large drive, so I might as well make use of the extra space.
Do I format it to FAT? Never done this before. Also, how do I enable it when I boot up? Do I have to make my computer to boot from the USB drive first in the BIOS settings or is there an easier way to do it (like clicking on an icon inside the USB virtual drive on the desktop).
View 3 Replies
View Related
Jul 24, 2011
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies
View Related
Jul 4, 2011
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
View 14 Replies
View Related
