Ubuntu Installation :: Unused Space When Partitioning HD For Dual Boot?
Mar 1, 2011
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
View 9 Replies
ADVERTISEMENT
May 16, 2011
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
View 2 Replies
View Related
Jan 10, 2010
I have a new win7 system with a 500GB HD. What is considered the safest way to partition the disk before installing Ubuntu?
View 9 Replies
View Related
Jan 29, 2010
1. I have windows xp on my notebook compaq presario v2000.
2. Wanted to load linux as dual boot.
3. Tried with Suse linux, but there was some blank or black screen problem after installation.
4. Someone suggested Ubuntu linux.
5. Downloaded and burned ubuntu on a cd.
6. But this time during installation during partitioning there was a serious problem.
7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd.
8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space".
9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook.
10. So any comment why the dual boot partitioning option was absent in my ubuntu cd.
11. Or there is some thing to be activated in my notebook setting to enable dual boot.
View 1 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
Mar 6, 2010
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies
View Related
Feb 24, 2011
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
View 5 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
Jan 31, 2010
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
View 4 Replies
View Related
Jun 17, 2009
I've got Fedora 11 working fine on an HP Mini 2140 netbook. (Wireless works after enabling the rpmfusion repo and installing the broadcom-wl driver.) Now I want to try to put Moblin 2.0 on the netbook as a dual boot.
Unfortunately the Moblin installer (Anaconda? Looks like it.) reports that there's no free space on the / volume. It looks like what's going on is that Fedora 11 created two partitions: /boot and /; and the / partition is LVM and uses all the rest of the available space on the hard drive.
I want to continue using Fedora 11's bootloader for any dual boot. So, basic question #1: Is the solution to create another partition for the Moblin install, or to resize the existing / LV in the existing LV group, and then create another LV for the Moblin install? In other words, can I install another OS on a second LV in the same LVG?
View 1 Replies
View Related
May 1, 2010
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
View 3 Replies
View Related
Jan 15, 2009
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
View 5 Replies
View Related
Sep 20, 2010
I am trying to dual boot Fedora 13 onto my Windows 7 machine. I have shrunk my Windows drive to create 100GB of unpartitioned space, but when trying to install Fedora onto this free space (it is recognized as "Free" space), the installer tells me that there is no space for the partition.
View 5 Replies
View Related
Jan 25, 2010
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
View 11 Replies
View Related
Oct 13, 2009
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
View 3 Replies
View Related
Sep 23, 2010
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
View 7 Replies
View Related
Nov 7, 2010
Fedora 14, 64-bit. In installer i came to partitioning, chose option: User Free Space, on hdd i have a partiotion (unformatted) of 40 GB. Still, installer says:
Quote:
Could not find enough free space for automatic partitioning, please use another partitioning method. What should i do? PS. I don't want to create partitions manually, because I don't know how to do it and installer is going to do it way better itself. I can't use whole hdd either as i have windows and data on it which i cannot lose. PPS. I tried unformatted partition, unallocated space (of 40 GB), options: User Free Space, Create Custom Layout, but i always get an error msg about 'not enough space'. Is it possible, that installer is bugged?
View 8 Replies
View Related
May 16, 2010
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
View 5 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Apr 20, 2010
I have Fedora 6 & 10.3. Both DVD's will install the default partitioning (LVM) with either the normal programs or the custom selection. I wish to custom create my own partitions (about6 or7) with EXT3 format. The drive is112Gb. and I am only using about 30Gb. in total, giving approx. 80 Gb free. However after checking for dependencies the error message comes back 'Insuffient free space' every time. This happens on another M/board and/or Drive combination.
View 11 Replies
View Related
Oct 8, 2010
I seem to have a strange problem with disk usage on my linux partition. I just upgraded my 10.04 to 10.10 and I'm not sure if this was there before.My nautilus tells me that I have 1.4 GB free on my linux partition. My partition editor (GParted) tells me that 79.31 GB of my 81.38 GB is used, and I've 2.08 GB free. There's no way I've got that much stuff on my linux partition, and to confirm it, I ran the Disk Usage AnalyzerApplications/Accessories), and the total size of everything on that partition amounts to much less than 10 GB.
I've tried deleting all my trash (both root and user trash) and I looked at all the folders trying to find any suspiciously large ones to no avail. I thought it might be some weird bug, but removing some files, added the correct amount of space to the free space detected by nautilus. I have no idea what eating up my disk space.
View 9 Replies
View Related
Oct 20, 2010
I am the sole user of my laptop and i have the following hard disk space
Code:
Device Directory Type Total Free Available Used
/dev/sda7 / ext4 18.8GiB 15.4GiB 14.5GiB 3.4GiB
/dev/sda8 /home ext4 33.5GiB 7.2GiB 5.5GiB 26.3GiB
Now i want to use the free space in /(root) by moving files there.But i cannot create a folder or file in /.How do i go about this?
View 6 Replies
View Related
Jun 14, 2011
I'm trying to Dual-boot Windows and Ubuntu. I have Ubuntu now. I'm trying to remove space from the Ubuntu partition(Active) but, it won't allow me to remove space from active partitions. I have 11GB Free according to GParted, yet during the installation it displays only 8MB Free. Oh, and I'm trying to install Windows XP through VirtualBox. Is that possible through the install CD? I've been searching and haven't seen anything about it.
View 5 Replies
View Related
Dec 3, 2009
I have a CentOS 5.3 x86_64 system setup as a file server, backup server, and iSCSI target. The physical machine has six hard drives, two of which (bay0 and bay1) are 1TB disks in a RAID1 mirror. Therefore, CentOS is installed on /dev/sda. My question is this: how can I format and mount the large portion of sda that's not in use right now? Here's some more info:
Disk /dev/sda: 999.6 GB, 999653638144 bytes
255 heads, 63 sectors/track, 121534 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]...
As you can see I've got about 1TB of space on sda. However, when I look at my df -h command and my LVM management what I find is that I've got:
root / filesystem = 8GB and is under Vol00
swap = 2GB and is under Vol01
/var = 2GB and is under Vol02
Sounds like I have a ton of space on sda that I'm not using. It also looks like I'm using LVM, but I'm not familiar with LVM nor am I really comfortable with how I can use the rest of the 900+GB I have available on sda. how I can format and mount the rest of the free space on sda?
View 5 Replies
View Related
Jun 28, 2010
I referred to this video, to install ubuntu(NOT on windows partition) and also run windows XP, and im well enjoying ubuntu. i have some hard-disk issues, and i'm going to format the whole hard-disk. I will format and repartition using windows xp installer. I'm leaving 20 GB for ubuntu. So I can install ubuntu in 2 ways...
1) While re-partitioning, i can leave 20 GB unallocated and later put ubuntu there
OR
2) Install windows XP the normal way, and then allocate 20GB for ubuntu using GPART - by shrinking a windows partition. (as shown in video)
View 9 Replies
View Related
Jan 10, 2010
I just installed Fedora 12 in a laptop with a big hard drive and used LVM for it. The thing is that I used just a fraction of the LVM total size to create the "/" partition and decided to leave the task of creating the other partition (the data partition) with the rest of the LVM space after F12 got installed. Unfortunately I found that Gparted is apparently unable to perform that task of creating a new partition in unallocated LVM space. Is there any way I can create a new partititon in that unused LVM space?
View 4 Replies
View Related
Nov 23, 2009
This is my situation: on a LVM2 partition, i have shrink a logical volume to free new space for a new partition.
My system-config-lvm screen: http://forums.fedoraforum.org/attach...1&d=1258988216 code...
View 9 Replies
View Related
Oct 28, 2009
My current pc running on LINUX raid 1 with both 80bg hdd, the /dev/md0 is growing. Either
a) I need to create another mount point to utilise the space.How i do this ? OR b) Clone the existing 80gb with 250gb, so /dev/mdo got more space?
# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md0 20161084 15577508 3559440 82% /
[code]...
View 3 Replies
View Related
Sep 28, 2010
I am running 10.04 Lucid on a Toshiba Satellite A105. The onboard video is an Intel Graphics Media Accelerator 950. The issue is that when I connect it to my Panasonic widescreen TV (laptop is widescreen as well) the display is shrunk and has a lot of unused space on the sides/top/bottom. So like, if I wanna watch something from Hulu, I plug in the S-Video, and I can watch on the TV, but it's not using all the screen available... I have not found a way to resize the output so it fills the screen.
View 6 Replies
View Related
