General :: Partitioning - Dual Boot Windows 7 And Slackware 13.0
Oct 13, 2009
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
View 3 Replies
ADVERTISEMENT
Jan 25, 2010
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
View 11 Replies
View Related
Feb 24, 2011
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
View 5 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
May 1, 2010
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
View 3 Replies
View Related
Oct 27, 2010
I installed Slackware 13.1 and Windows server 2008, I also installed LILO in MBR, I Found I can boot into slackware, but can't boot into Server 2008. then I　use command bootsect/fixmbr. now I can boot into server 2008, but the problem is I can't boot into slackware. I try to install lilo to supper sector. it's not works. I only can boot my slackware by a USB stick.who can help me to solve this problem? I really need these two systems.
View 5 Replies
View Related
Sep 19, 2010
My new job requires I use Windows and as such I put a second HDD in my laptop for the purposes of Window/Work The issue is that Windows will not install on this second disc (Windows cannot create partition or install to disc). I got around this by installing Windows to the first disc, then the second then putting Slackware back on the first but then I suffer the "Bootmgr cannot be found, press ctrl + alt + delete to restart".
I am using Lilo and I have never really had an issue dual booting them on the same disc (Admittedly over a year ago) but it is of the utmost important I have them on separate Discs. Has anyone encountered this and/or know a way around?
View 4 Replies
View Related
Dec 16, 2010
I never tried Slackware and is curious about it.Have some questions to ask:
1)can it dual boot with windows 7? It uses Grub bootloader?
2)does it have MP3 and flashplayer plugins? It has Amarok?
3)does it have Qt compiler?
4) does it play DVD movies? Blue ray?
5) does it support USB 3.0 ?
View 14 Replies
View Related
Jun 20, 2010
I haven't used Slackware before but I used Ubuntu which I dual-booted with Windows XP.
Now I want to dual-boot Windows XP with Slackware. How do I install Slackware on top of my Windows?
My laptop is a ThinkPad my Windows is XP Pro SP3.
View 9 Replies
View Related
Jan 21, 2010
So I got slackware 13 from the website and created 4 partitions (primary) and left some (100GB) space as I planned to install windows 7 in that. After installing slack, when I booted from windows DVD (rtm) in partition section it said I already have 4 primary partition so windows cannot used the rest of space despite the fact that it was free (windows even grayed all options like new partition and format etc. for that space). So I thought I'd create 2-3 primary partition for linux (slackware) so that windows can use the free space and make it a primary partition.
So, Next I formatted with slack (3 partition, 2 Primary, 1 extended, total space for slack 50GB) and after its installation I worked my way with windows, but it just created one partition of 100Gb, won't let me create any saying all primary partitions are created. Anyway, I created that partition and installed windows 7. But it messed up my lilo (slack won't show in boot menu) neither can I create any new partition.
After all I reformatted again created 2 partitions for windows (that actually became 3 as windows 7 create 100Mb separate partition for system). Installed windows correctly. Then I booted with slack , which allowed only creating 1 partition as 3 were already there. So I created 1 extended partition, in which I created 4 partition 1 to mount for /boot (100M), 1 for /swap (3G), 1 for home (10G), 1 for / (35G) everything worked fine till I reached last point to install lilo. At that point it said cannot install Lilo (I tried all options simple, expert, install to MBR etc.) but it just won't install. Anyway, after that it said you can install it manually so I clicked OK. Then it said setup complete, remove disk and press alt+ctrl+del to reboot, which I did. But there is just windows 7, no slack ?
View 9 Replies
View Related
Jul 24, 2011
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies
View Related
May 16, 2011
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
View 2 Replies
View Related
Jan 10, 2010
I have a new win7 system with a 500GB HD. What is considered the safest way to partition the disk before installing Ubuntu?
View 9 Replies
View Related
Jan 29, 2010
1. I have windows xp on my notebook compaq presario v2000.
2. Wanted to load linux as dual boot.
3. Tried with Suse linux, but there was some blank or black screen problem after installation.
4. Someone suggested Ubuntu linux.
5. Downloaded and burned ubuntu on a cd.
6. But this time during installation during partitioning there was a serious problem.
7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd.
8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space".
9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook.
10. So any comment why the dual boot partitioning option was absent in my ubuntu cd.
11. Or there is some thing to be activated in my notebook setting to enable dual boot.
View 1 Replies
View Related
Jan 31, 2010
I'm running OS X 10.5.8 and Ubuntu 9.04 on a Macbook 4,1, and I want to remove the Ubuntu partition so I can free up hard drive space. However, the linux swap partition is located in between the OS X and Ubuntu partitions, and GParted won't let me remove it when I boot from an Ubuntu Live disk, and OS X Disk Utility can't affect it either. I followed the dual booting instructions here, and I pretty much just want to undo all of it and get back to an OS X only machine.
View 4 Replies
View Related
Sep 23, 2010
I have a problem trying to install CentOS 5 as a dual-boot with my Windows 7. Using Windows tools, I shrunk my main partition and created about a 100GB of unallocated free space. Then, I restarted my computer, booting from the CentOS dvd, but when choosing "Use free space on selected drives and create default layout" option during installation, I get an error saying that partitions couldn't be allocated as primary partitions and that there is not enough space left to create partition for /boot.
View 7 Replies
View Related
Mar 1, 2011
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
View 9 Replies
View Related
May 16, 2010
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
View 5 Replies
View Related
Nov 22, 2010
I managed to do something that takes real talent to do: I broke my Slackware. I was chowning something for a user and, as I was really sleepy, accidentally entered "chown -R user /". It really didn't break, but it started to get glitchy because I couldn't fix it well enough. Then I rage-quit the game and wiped my whole drive except for my personal files. So now I'm here to learn how to properly install Slackware64 current out of the box and hear suggestions regarding partitioning schemes. First of all, I'm aware Alien Bob has a script to help automate the upgrading of the system. Is it the mirror-slackware-current.sh? Then what should I do? Install Slack and run the script or can I download things from another distro (I have Arch installed - love LXDE!) and use the Slack DVD to boot and choose it as the source?
If the suggested method is to install Slack first and go from there, I should upgrade slackpkg first, right? My other question is regarding partitioning schemes. I have an 160GB hdd and I used to follow this format: a small (200MB) primary /boot, a primary 20-30GB /, a primary 100GB (give or take) /home and the rest as an extended distro-hopping partition (at the moment I'm building LFS) plus swap. The thing is that I've been noticing a big inconvenience in this method. I have around 40GB left and sometimes I get curious about distro x or y and want to install it so I have to change the logical partitions and my swap gets renamed, which makes me have to edit my fstab. I already changed this setting sda1 to be swap. I'll be installing in a desktop personal computer. Some college work, but nothing too hardcore.
View 7 Replies
View Related
Sep 11, 2010
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies
View Related
Jul 4, 2011
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
View 14 Replies
View Related
Sep 27, 2010
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
View 3 Replies
View Related
Nov 13, 2010
I am having some trouble setting up a dual boot with Win XP and Slackware 13.1. Lilo lists both Linux and Windows, but when I select Windows, all I get is a black screen. I have two hard drives, sda1 and sdb1. I first installed Windows on sdb1 (it is a smaller, older drive). I then installed Slackware on sda1 and selected to install Lilo on the MBR. I'm guessing that by doing this, I wrote over the Windows information that was already there. Could this be my problem? I feel like this should be an easy fix, but I just don't know where to start in order to fix it. If it helps, here is the end of my lilo.conf file.
# Windows bootable partition config begins
other = /dev/sdb1
label = Windows
table = /dev/sdb
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
[Code]...
View 14 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Jan 7, 2010
Im trying to setup a dual boot on my laptop. it had vista installed on it and am having some trouble getting slack ware installed. I have gparted live to partition my drive but am not sure if im using the program properly. I tried resizing my HD before and once I booted the slackware cd, it says i have no linux or linux swap partitions installed:S
View 14 Replies
View Related
May 29, 2010
I'm a pretty experienced Windows user, and have coded in x86 and win32 API for a while, so I know the system reasonably well. I've used windows since the days of Win95, and prior to that I had an Amiga - so I'm pretty rusty in unix-like operating systems. I have little C coding knowledge beyond reading it, though I can understand what the programmer is doing from reading the source. My only experience with installing linux was on a 486 laptop that failed spectacularly when the CDROM couldn't be detected and used, so I'm necessarily a little wary of doing this, but I've become quite exasperated with Windows lately.
I have decided to make my life interesting (if not easier at first) by dual-booting Linux with Win7. My current machine is a dual-core intel laptop with 2GB of RAM and an ATI X1250 mobile GPU, with a 120GB HDD. I have two partitions currently on this machine - both 60GB-ish. The main C: drive is Win7. I'm aware of the hidden partition that Windows installs. I have an external 1TB USB drive for my applications and data, so space shouldn't be a problem. There is no floppy drive (unsurprisingly) and I can boot from the internal DVD drive.
I have chosen the Slackware 13 distro because it seems to be well respected as a learning tool for unix-like operating systems. My main aim here is not to abandon Windows at first, but to learn a new OS. I'm aware that Slack may not be the most user-friendly distro, but will give me knowledge that I might not gain under other distros. If I'm making a mistake here, then let me know! I have plenty of free time to devote to this little project, and I'm not afraid to learn. I am however afraid to destroy my Win7 fall-back. If all else fails, I need to be able to go back to a working OS to jump on the net to find the answer to what went wrong.
So my question, as per the subject title, is: What do I need to know before I do this? I have no idea what I'm doing with regard disk partitioning beyond Partition Magic - which I don't actually possess anymore. I can use the Windows disk management app. I have no idea how to manage a boot sector. So are there any gotchas that I need to bear in mind? I've already read this thread: [URL]. Which I must admit looks very complicated! I have a fair bit of time before my Slackware 13 DVD-ISO image downloads (20KB/Sec) so have some time to gather information.
View 14 Replies
View Related
Jan 5, 2011
I just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
View 7 Replies
View Related
Dec 18, 2010
I've been reading many threads on the ability to dual boot. I am not a "newbe" but have installed linux and Fedora many times, included starting from Windows 7 using EasyBCD. I wish to install Ubuntu Studio 64AMD on my PC:
CPU: AMD Phenom II x4 965
RAM: 8GB
HD: Hitachi HDT721064SLA360 SATA ~600GB C: 200GB & D: 200GB, Fedora: 100GB the remainder for Ubuntu.
My problem is that the installation instructions don't seem to talk about NOT installing grub on MBR as it was on the Fedora install. I don't want to accidentally overwrite my MBR. Is this option available? Will EasyBCD work with Ubuntu? No, I want Windows 7 left intact and do not want to dual boot from Grub!
View 5 Replies
View Related
