Ubuntu Installation :: Partitioning For Dual Boot-- Windows Is On An Extended Partition - Other Weirdness??
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
I bought a PC with Window Vista on it as my partner needs it. Using gparted I set up Primary partitions for Vista OS (sda1) and Ubuntu OS (sda2), plus an extended partition for Vista files, Ubuntu /home and swap:
fdisk -l Device Boot Start End Blocks Id System /dev/sda1 * 1 3969 31880961 7 HPFS/NTFS /dev/sda2 3970 5294 10643062+ 83 Linux
[code]...
My problem is Vista (as always). The 30GB I allocated is not enough, even just for the OS and it won't now boot from GRUB, though I can see it from GRUB. I don't want to do anything that risks a problem for Ubuntu. Will grub still see both OS if I wipe sda1 (Vista OS) and reinstall Vista OS on the extended partition sda6? Ideally I would like to merge sda1 with sda6 and install Vista on that, but that looks way too risky / impossible.
Edit - There is another drive on the PC which is much larger and I use for backup. Is there any scope for installing Vista on that one so that GRUB still identifies both. Not ideal as I like having one as the backup for the other.
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
I have Windows 7 starter on an ASUS 1005 HAB, 10 inch, with 149.5 GB HDD. Drive C is 139.03 GB. There is a partition and it has 10 GB (Primary Partition) unlike C it is 100% free and another has 15 MB also free and it is called the EFI System Partition.So to dual boot, how should I prepare the partitions? Do I need make a new partition in what is now drive C?
Keeping at least 45 GB for Windows 7.I have ready to install, Ubuntu Netbook 10.10. Considering trying others as well, like Fedora, Mint or Ubuntu Netbook 10.04.2.
I have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7) Delete Windows /dev/sda3 70 GB although 40 GB are free Create Extended /dev/sda2 140 GB Create swap /dev/sda5 2 GB even though I have 4 GB RAM Create Root /dev/sda6 20 GB ext4 Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
i know there are lots of posts to talk about this but i'm still not sure about what to do . I have a new 250GB hard disk and want to use it to dual boot windows xp and ubuntu. i know i will have install xp first, but what would be they best way to partition the drive ? i want to be able to have some space in xp to to download and use 3d simulation programs and for gaming. and i also want to be able to see all my data from both OS.I guess i'll have to choose the manually partition the drive option on the ubuntu installation, but then what should i do exactly? and what would the partition types be? NTFS, FAT32, etc.I have a 2GB RAM, i think it matters for the swap partition size.
At the end of this week I'm going to get a new PC. It will have a 80GB SSD ( 2.5" SSD INTEL X25-M 80GB) and a 1TB HD. I want to dual boot Windows 7 and Ubuntu on it.The SSD will be for fast bootup and should also contain the core OS stuff. I will partition it for both Windows 7 and Linux but I'm not certain how big I should make both partitions. I was considering going with 60GB for Windows and 20GB for Linux but is that big enough for keeping the core Ubuntu on?
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
My old-ish Dell laptop is currently running Windows 2000 and Ubuntu 9.10. I originally installed 2000 to try and squeeze a bit more performance out of the laptop for general use, but in practise Ubuntu is running great and sees far more use than the Win2K installation so I've decided to create a stripped-down (i.e. non-networked) XP installation purely to run a few favourite audio applications.
I plan to do a fresh Windows install and wipe the current C: partition. Is there anything I should be aware of in terms of the GRUB bootloader. Will it simply recognise the new XP installation? Obviously I will back up my data before I continue, but are there any other precautions to take with respect to dual-booting? I could do without having to reinstall Ubuntu too!
1. I have windows xp on my notebook compaq presario v2000. 2. Wanted to load linux as dual boot. 3. Tried with Suse linux, but there was some blank or black screen problem after installation. 4. Someone suggested Ubuntu linux. 5. Downloaded and burned ubuntu on a cd. 6. But this time during installation during partitioning there was a serious problem. 7. On ubuntu webpage they say for partiioning i will get 4 option, but i got only three options in my cd. 8. The missing option was the most important , which was required for dual boot. " Guided resize and use free space". 9. So i had to abort my Ubuntu installation as using any other option could have effected my current xp installation or might have formated my whole notebook. 10. So any comment why the dual boot partitioning option was absent in my ubuntu cd. 11. Or there is some thing to be activated in my notebook setting to enable dual boot.
To install Ubuntu alongside Windows 7, I have to shrink Windows 7 partition C:. But due to some unmovable files, I cannot shrink as much as I plan by using Windows own shrinking tool. I guess many of you who have both OSes on the same hard drive must have similar experience.
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system: -- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup -- 1x 320GB WDD HDD (non RAID setup) (The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources: - [url] - [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
I'm running a dual boot of Ubuntu 9.10 and Windows 7. For months now everything has been just wonderful. Recently, however, I tried to add another partition (in windows) and saw that my Ubuntu partition is recognized as RAW. I formatted it as NTFS originally. In Ubuntu, it is recognized correctly (ext4). I don't know what's going on. I'd like to be able to install drivers to recognize this partition in Windows. Will I have to reformat? I'm not sure if it's at all connected, but probably worth mentioning: while booting into Ubuntu, I received an error about "usplash mode failed." It also said something about "mount of filesystem failed." (I really, really wished I had written down the error message.) Everything seems to work now.
I had dual boot on my Asus laptop, Windows and Hardy. Then my Windows XP crashed and the person who repaired installed Windows 7 but didn't preserve the dual boot prompt on startup. I've explored BIOS but there seems no way of accessing my Ubuntu partition that way.
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
When I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
Regarding the installation of ubuntu 10.0.4 on my HP pavilion DV5000 laptop.
I previously installed windows 7 in my laptop and i would like to have ubuntu and windows 7 in dual boot. in order to do that i need to free up some space to be able to install to create partitions for ubuntu and the swap even if I have 30GB of unused space.
When i launch the live cD and i reach the step 4 ubuntu is actually recognising three operating systems installed:
- windows 7 (loader) under dev/sda1 (92,86GB) NTFS - windows NT/2000/XP (which is corresponding to my "HP recovery" partition) under dev/sda2 en FAT32 (6,2GB) - windows XP embedded (I don't unerstand what it is) under dev/sda3 NTFS (1,1GB)
when I go to the step 6 to modify the size of sda1 to free up some space, i don't have the possibility to change it, i can read "unknown" under the used space collumn.
I also tried to resize this partition using gparted but unfortunately i had the same problem, when i select it all the options to modify it are greyed out and i can notice a key near the hard drive logo (is it locked ?).
I am not really sure if the title makes any sense or if it even possible. Basically I am currently triple booting with Mac osx on the first partition windows 7 on the second and ubuntu linux on the 3rd with a swap partition. So basically on my 2TB harddrive
Mac (200gb) Windows (200gb) Linux (200gb) Swap (8gb) NTFS(1592gb)
The last partition is formatted as ntfs using Gparted, windows cannot detect it. The windows disk partitioner shows the swap and ntfs partitions as unformatted. I can unformat the space and use the windows partition to add format it as ntfs but it would format the linux swap partition as well. I am worried that it could potentially screw up everything on my harddrive. My question is. What do I need to do to get the ntfs parition recognized by windows (should I use the windows partitioner)?
i have windows xp with ntfs partitions on my laptop i want to install centos on it will i be able to dual boot centos with windows xp on the ntfs partition
I know it is possible to move the ubuntu home directory but what is the best way to move it safely to an NTFS partition that already has valuable data in?
