Ubuntu Installation :: Trying To Dualboot Windows 7 - Doesn't Recognise That Windows Is There
Jan 3, 2011
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies
ADVERTISEMENT
May 31, 2010
I have a Vista/Kubuntu dualboot, with grub2 as my loader. Because i have read that Windows likes to ignore something else present on the system and overwrite everything with itself. So i installed Vista, then Kubuntu.Now i want to upgrade my Vista to Win7. My question is - what should i do in order to keep my current dualboot intact (Grub2 as a loader, and kubuntu fully functional). I fear Win7 might even never ask me about keeping my kubuntu dualboot, just overwrite everything. PS: My bootinfoscript output
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 5 Replies
View Related
Oct 21, 2010
I have a problem installing ubuntu 10.10 (64 bit) with dualboot together with windows 7.
The situation is a follows: on the pc is windows 7 (home premium) installed, the windows bootloader is in the MBR and THIS CANNOT BE CHANGED (it's not a private pc).
I wanted to do this the way I have done with the previous ubuntu realeaes I used (8.04 and 9.04): install everything normaly and only tell the installer to install GRUB into /dev/sda5 (root-partition of the ubuntu-System). Then I used
Code:
To copy the bootsector in a file and integrate this file into the Windows Bootloader. The problem is: this file has only zeros inside (00hex), so it seems, that there is no GRUB written into the bootsector of the linux-partition.
The whole procudure works without any problems using Windows 7 and ubuntu 9.04, but I want to have the new release of ubuntu!
View 5 Replies
View Related
Aug 9, 2011
I have 2 HDD's on my computer. On HDD 1 i have a Windows Vista installed, on HDD 2 my fedora is installed. I am so pleased woith the fedora system that i dont even use the windows system anymore.
Now i want to uninstall the windows. How can i do this the best way that the result is that the existing Fedora stays and boots on computerstart and that i can use the HDD where windows was on the fedora system to store stuff (now the fedora system cant see the windows hdd becouse its NTFS)
View 7 Replies
View Related
Jun 30, 2010
So I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
View 9 Replies
View Related
Dec 17, 2009
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies
View Related
Dec 13, 2010
I am planning to buy a new system. I am planning to use fedora and windows vista (I have a legal copy with me and I dont want to buy a new one. That's why no windows 7 here).
How shoudl I proceed? Which OS to install first? I believe (from reading the threads) that I should install windows vista first and Fedora second.
The main question I have is this. I heard that HDD makers will no longer ship the current HDD's in Jan. Heard that 512 byte hard drive format is to be replaced by 4KB. I read somewhere that this can cause issues when we go for dual boot. Is this true? In that case, what steps can I take to ensure no problems occur?
I really want to use Vista only for running certain applications which do not run on linux. I have heard WINE can simulate a WIN environment. But is this really true? I mean, can it simulate WIN environments perfectly?
My next question is regarding dual HDD. I am planning to go for 2*500GB HDD instead of 1*1TB HDD... So will it be better if I dedicate one HDD to Vista and 1 HDD to Fedora? (I know it will be a waste of space since I will be using Fedora mainly and hardly aropund 10-20 GB for Vista. But I can access the Vista partitions)
Does fedora play all media formats? I know out of the box it might not.. But does having VLC help?
I dont see any firewall protection in Linux. I have heard of using IPTables, but then how efefctive are those? I will be doing many online transactions and I want my system to be secure. I know Linux is pretty secure. So should I harden the security with a hardware firewall?
I will be watching a lot of DVD movies, AVI movies and some HD movies as well. Does linux have issues rendering HD movies properly? I have read somewhere that fedora has issues while Win is good and Debian/CentOS (Not sure which one was mentioned) is even better. I had a pretty powerful config in teh past and yet I have seen that my Vista machine had trouble rendering a HD movie properly.
I will be buying AMD configuration along with an ATI graphic card (sometimes). Does Fedora have any driver issues?
View 14 Replies
View Related
Jul 28, 2011
I've been trying to dual boot with Windows 7. I installed it on my backup harddrive. I've tried booting it from there but no luck. And I'm not seeing a boot from message.
View 9 Replies
View Related
Feb 8, 2010
Little help needed. just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.
I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that! Some nice simple paint by numbers instructions would help me alot if at all possible.
View 5 Replies
View Related
Oct 25, 2010
I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
View 8 Replies
View Related
Jan 4, 2010
I tried using Wubi to install Ubuntu 9.10. It worked fine in the Windows part of it. After the restart, I got the ubuntu option. Selected it. Something about pressing ESC for more booting option came. Then two lines of something, and then a BLANK screen for the next hour. I hard rebooted then. Selected Ubuntu again, and pressed ESC and booted into Verbose mode. Still the blank screen ALWAYS comes. No errors. Just the blank screen. What am I supposed to do? I tried reinstalling through Wubi, but the BLANK SCREEN ALWAYS COMES. I am trying an online tutorial for dual booting Windows 7 along with Ubuntu, but the guy in the tutorial says just boot live. What is that? Like just setup your BIOS and put the cd in? I am gonna try it in sometime, after my cd is burned, but still, better if I get a reply before that.
Okay, I tried with the cd, selected the option of trying Ubuntu without installing, but again the BLANK SCREEN loves me, so it won't leave. Do you think I've got a corrupt copy of Ubuntu. It is the torrent, that is linked on their official website. Should I like redownload it and try? I really want to try out Ubuntu.
With the cd I also tried checking the cd for errors option on the screen, and that too showed no errors. I want my windows installation to stay but I want to try Ubuntu along too. Still I tried installing Ubuntu, without trying to let Windows stay or something, but still, obviously the BLANK SCREEN.
View 4 Replies
View Related
Dec 20, 2010
I have a Dell XPS 420 with Ubuntu 10.10 (2.6.35-23-generic x86_64). My internet used to work (out of the box) without any problems, but after install of Windows Vista (Home Ed. 32bit), I am unable to use the internet in Ubuntu. The network card is a Linksys WMP600N Wireless-N PCI Adapter. In Windows it works without problems.
In ubuntu, the network manager indicates that I am connected to the network, and I have an IP address in the 192.168.* range. I am able to ping the router, but unable to ping outside addresses. I have not changed anything, but still my wireless connections has stopped working.
Code:
View 1 Replies
View Related
May 23, 2010
Im trying to dual boot windows xp on my computer already running fedora core 6. I have some experience with dual booting- i had a windows xp laptop, and now it runs both windows and ubuntu. Ive done some reasearch, but still not clear on how exactly I should go about dual booting xp on fedora.
I forgot to mention above I do not have internet access on that computer. I do, however, have a laptop (windows xp) that i can download things on and burn on a disc if needed. it has internet. If you know of any solution to run programms such as visual studio and dreamweaver on linux which dosnt require dual booting(i tried wine but didnt work for me)
View 1 Replies
View Related
Aug 31, 2011
I've recently upgraded my Lenovo Sl500 laptop from windows vista to windows 7, both 32bit.
Prior to this i had dual boot between CentOs 5.6 and windows vista.
After i have upgraded to windows 7, the dualboot is apparently gone, I am no longer able to boot in linux.
My question is now, how can i fix this, or create a new dual boot?
Im currently left with two partitions, one with Windows 7 installed, and one with CentOs 5.6 installed, but as said, I am unable to acces my linux.
View 6 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Oct 11, 2010
Last time I installed Ubuntu in a dualboot configuration with Win7 on one of my machines, my entire boot sector and Windows install got corrupted, resulting in a complete loss of all my data and requiring a fresh install of Windows.
I looked into this a bit after the fact, and it seemed to me it was due to conflicting hard disk geometry between Linux and Windows.
My question is, how likely is this to happen with Fedora? Is this because of Ubuntu? A bad install? Is there someway I can avoid this from happening when I install Fedora if it will happen?
View 1 Replies
View Related
Apr 23, 2011
I have a hp pc that has a hard drive of 750 gb and a recovery hard drive of 31gb. I installed linux side by side with windows 7 for dual booting. Now I can't boot windows 7 anymore. During the installation of linux, I chose the advanced option so as to manually partition the drives for linux. On the available list of drives, I chose the 750gb and clicked on modify. I chose 150gb for the root "/" (on ext4) and 700mb for swap out of the 750gb and clicked install. After finishing the installation I restarted the pc and sought to test linux. The linux works fine but when i tried to start windows, I have a boot error. My pc doesn't seem to recognize windows anymore. It takes me straight to the HP recovery tool. I don't understand why. So I logged into ubuntu and check the disk utility and I discovered that I have a whooping 600gb unallocated space. It's like my whole windows is gone. This is what Disk Utilty shows
150gb ext4 | Free 600gb | RECOVERY 31GB NTFS | HP_TOOLS 108MB FAT
What can I do to recover my windows back?
View 3 Replies
View Related
Oct 26, 2010
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
View 7 Replies
View Related
Jul 6, 2011
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
View 2 Replies
View Related
Apr 6, 2010
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
View 2 Replies
View Related
May 7, 2010
As many people have posted before regarding this issue, i think it was me who messed things up as i believe i incorrectly put grub on the sda1 ? when they asked about grub config during installation i was a bit lost, and even though i went off the help it said if you were not sure choose all of them..
So i am wondering if there is an easy way to fix this. As i am running sata drives on my laptop, so my windows xp recovery option is out... and all i have is a windows image, which i would like to try and repair from ubuntu as i can start ubuntu up.
Here is my boot setup:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
View 2 Replies
View Related
Oct 11, 2010
i have a 250gb hdd and a 160 hdd. i installed wind0ws 7 on the 250 and then ubuntu 10.10 on the 160. In the past (8.04-10.04) after install ubuntu on boot grub would give me the option to go into ubuntu or windows, now ti doesnt give me that option and boots directly into ubuntu. I dont even think it has recognized that windows is there.
View 9 Replies
View Related
Jan 6, 2011
I downloaded Ubuntu 10.10. Initially, I had the problem on the "Who are You" screen and was told that lower case letters were needed. Long story short, I was given a work-around since there was a partition on my hard drive. Ubuntu installed correctly - works just fine. However, upon booting up, if I choose Windows 7, it takes me to Recovery and wants to reinstall factory specs. What's the best way to resolve this? Is going back to factory specs and then reinstalling Ubuntu a viable option? This is brand new computer and I've downloaded nothing - wanted to make sure everything was working fine before I did that - so I would have no problem with doing that.
View 9 Replies
View Related
Jan 8, 2010
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
View 4 Replies
View Related
May 2, 2010
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
View 9 Replies
View Related
Dec 8, 2010
I've been using kubuntu from time to time, and one thing that i love was the option to install/uninstall as if it was another common windows application. A few days ago, i downloaded the 10.10 release, and after i executed wubi, i just get 2 option: Full demo and install and learn more So, am I doing something wrong? BTW, i also run wubi with an ISO next to it, but it shows the same window. So, is there a way to install kubuntu as a windows appa again? I've tried google, but everything seems to point that that feature still exists, but i cant find it.
View 3 Replies
View Related
Dec 9, 2010
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
View 2 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
May 5, 2010
I installed 10.04 on Lenovo T61 and USB port recognises a USB stick with no problems.I installed 10.04 on Lenovo 3 x T40's and USB port does not recognise a USB stick.
View 1 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
