Ubuntu Installation :: Upgraded To 10.4, Windows Xp Doesn't Load?
May 7, 2010
As many people have posted before regarding this issue, i think it was me who messed things up as i believe i incorrectly put grub on the sda1 ? when they asked about grub config during installation i was a bit lost, and even though i went off the help it said if you were not sure choose all of them..
So i am wondering if there is an easy way to fix this. As i am running sata drives on my laptop, so my windows xp recovery option is out... and all i have is a windows image, which i would like to try and repair from ubuntu as i can start ubuntu up.
Here is my boot setup:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
View 2 Replies
ADVERTISEMENT
May 4, 2010
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies
View Related
Apr 14, 2010
I recently upgraded to ubuntu 10.04 from 9.10. I now have grub 1.98 and my problem is that when i select windows xp from grub it just goes to a black screen with a white flashing line. If i boot ubuntu it does the same thing for about five seconds then ubuntu loads right up. I hit e on windows xp in grub and this is what came up.
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs--uuid --set 7a841c73841c33db
drivemap -s _hd0) ${root}
chainloader +1
I then hit c on windows xp and entered each line on its own and the only error was this. error unknown argument '--fs-uuid'
View 6 Replies
View Related
May 5, 2010
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
View 1 Replies
View Related
May 1, 2011
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
May 20, 2010
I upgraded to 10.04 but now i can't boot windows 7 from the grub. what can i do?
View 9 Replies
View Related
May 11, 2011
The Grub Windows XP selection only gets "Starting ..." and then, nothing. Ran boot info (ref. below)
Updated Grub:
$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.32-31-generic
Found kernel: /boot/vmlinuz-2.6.32-30-generic
Found kernel: /boot/vmlinuz-2.6.31-23-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done .....
View 1 Replies
View Related
Nov 3, 2010
I upgraded from Ubuntu Desktop 10.04 to Ubuntu Studio 10.04 and running a dual boot system with Windows. On the grub screen there are four listings now for Ubuntu. Two recover modes and two ubuntu modes. Is this normal? Going to reboot and see if I can get a picture of it.
View 3 Replies
View Related
Mar 21, 2011
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
View 9 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Jun 25, 2010
i have Vista 64Bits Ultimate installed on an 1TB hard disk whit 3 partitons I have a 2nd 160GB HD in my system which i installed Ubuntu 10.4 on. All went ok, except after the installation finished and the system rebooted it booted straight into windows, whitout ever displaying GRUB. Now i found a way to boot either system, by using the bios and setting the applicable HD to 1st device. (or something similar)
Any way on how to solve this? keeping to have to enter the BIOS to select the HD and Thus OS i want to boot aint very practical. (im currently using ubuntu BTW)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]...
View 9 Replies
View Related
Oct 14, 2010
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies
View Related
Apr 9, 2011
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock)
1 Gb OCZ PC-3200 ram (2x512)
PNY Verto FX5200
Western Digital 40 Gb IDE hard drive
based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
View 1 Replies
View Related
Oct 2, 2010
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
View 2 Replies
View Related
Nov 1, 2010
After an update firefox doesn't load anymore. Whenever I try to install anything apt-get fails and warns me about broken firefox packages. It is mentioning firefox branding and chrome something (the latter seems to have gone away after I removed firefox via synaptic) apt-get install -f fails also.
View 1 Replies
View Related
Aug 5, 2011
I'm attempting to triple boot Windows 7, Mac OS X, and Ubuntu 11.04 on non-Mac hardware. Chameleon is my primary bootloader, which is supposed to chainboot into grub2, but all I get when I choose the Linux boot option is a black screen with blinking cursor. If I try to boot Ubuntu while holding shift, I get the word GRUB, followed by a space and a blinking cursor. grub2 is installed to the Ubuntu partition, and attempts to reinstall it there or to the MBR from a LiveCD result in errors. The MBR and GPT partition tables are synchronized. How do I go about making Ubuntu bootable, without breaking my other two operating systems (or at least leaving them recoverable)?
I built a new desktop computer.The goal was to triple boot the system with Windows 7, Mac OS X Snow Leopard, and Ubuntu 11.04. This endeavor has been significantly more complicated than I originally expected, but with the of a forum-goer at InsanelyMac.com, I've managed to get pretty far with a complex installation process. I've attempted to get Ubuntu running using two methods, neither of them achieving what I'm hoping. Both methods follow.
In the first method, I install Mac OS X using a specially designed install CD that boots into the Snow Leopard installation DVD. The disk is partitioned to have a FAT partition, followed by a Mac OS X journaled partition, ending in a second FAT partition. Mac OS is then installed to the second partition. The Windows boot CD is then used to format the first FAT partition as NTFS, which Windows 7 is then installed to.
As I'm sure you know, this installs Windows Boot Manager. Then I boot into OS X using the boot CD mentioned earlier, and install Chameleon, a bootloader specifically designed for Hackintosh systems, and (supposedly) capable of booting into all three operating systems I'm trying to work with. Finally, I divide and reformat the remaining FAT partition into an ext4 partition and a swap partition, and install Ubuntu to that ext4 partition, with the bootloader installed to the same partition. This will break the Windows bootloader, as now the MBR and GPT tables are no longer syncronized. Ubuntu is also unbootable; attempting to chainload into grub2 leaves me at a black screen with a blinking cursor. The former problem is solved by booting into a LiveCD and installing and running gptsync. Windows is now bootable, but Ubuntu remains in 'limbo'.
The second method I attempted is very similar, but deviates in the last few steps. After installing Windows, I instead install Ubuntu 10.04 LTS, as I thought I might have fewer bootloader issues with that distribution (don't ask why; it was a lucky hunch).This breaks Windows Boot Manager, but this time grub2 throws me into the grub> prompt.I can boot into Ubuntu just fine using the set root/linux/initrd/boot commands, but my motherboard's Ethernet port is not detected by the OS, so I can't directly download and run gptsync. Once I do manage to run it, though, Windows is then also repaired.
Unfortunately, since I can't access the Internet, I can't do a distribution upgrade that way. Trying to upgrade from the recent release's LiveCD...well...doesn't upgrade, just overwrites. So I get the same black screen with blinking cursor problem. I've tried reinstalling grub2 through a LiveCD using grub-install both using the --root-directory flag and the chroot method.
System specifications:
Intel Core i7 (LGA1155)
Corsair VENGEANCE 4x4GB DDR3
[code]...
View 3 Replies
View Related
Feb 4, 2010
System>Prefrences right? It's not there? Everywhere I look It says it should be there,.. well it's not... How can I add it manually? or where is the folder? I would like to edit my themes.. I have a theme manager, but it doesn't load any themes I download..
View 4 Replies
View Related
May 16, 2010
I'm at my wit's end with Windows this morning. I upgraded to Lucid a few days ago. Everything went very smoothly. Then I spent the greater part of Friday and Saturday "upgrading" to Windows 7 from Vista. I chose the "update" option which was only supposed to update to 7 rather than overwrite the entire HD. Now, GRUB doesn't load and I don't see my Linux partition. HOWEVER, it appears as though the partitions are still there! When I look in Winbloze at the HDs, it shows the Windoze HD as the partition size I made it when installing Ubuntu.
Any ideas on how to recover the awesomeness that is Ubuntu from this situation? Or do I need to install it fresh?
View 2 Replies
View Related
Apr 27, 2011
When "sudo apt-get upgrade" said packages have been kept back, used "sudo aptitude dist-upgrade."Obtained grub prompt on restart; purged and reinstalled grub using the chroot method. This has become customarily necessary after certain system-wide changes (see my other threads) but I still don't know why. But it's not the main subject of this thread.On restart obtained message saying kernel and fallback failed to load. Restarted and used shift to select 2.6.35-25 (3rd on the list) to load.I inferred that 2.6.35-28 is at fault since the recent upgrade mentioned kernel generic.
View 2 Replies
View Related
Jan 3, 2011
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Jun 4, 2011
I've used this video conferencing web app on Windows 7 and it works perfectly. [URL] But I'm having flash problems. Flash doesn't load and the light at my webcam doesn't switch on at all. Things to note:Cheese works so I know my webcam in Ubuntu is functional. I've tried purging the flash plugin and reinstalling it. It doesn't work on Chrome and Firefox so it's definitely only a flash problem. I'm not using any medication so I know it isn't me just imagining it. EDIT: I checked out [URL] Here's a screenshot: [URL] I'll check back later, Charlie the Unicorn just rang my doorbell and invited me to tea on the magic hot air balloon. Definitely not hallucinating. Definitely. Definitely.
View 9 Replies
View Related
May 23, 2010
I have Windows 7 as my main OS on the C drive, Ubuntu 10.4 as the second OS on my D drive. I installed Ubuntu from outside Win7, not through the Wubi, so I had to format the D drive, change the file system into ext4 so I ended up not seeing the D drive anymore on Win7.
My first question is, how can I get the Windows booter load first?My second question is, if I want to remove Ubuntu, how do I get back my D drive?
View 7 Replies
View Related
Jun 26, 2010
I supposedly installed ubuntu 10.something into a dual boot with windows vista but now windows vista won't load. It says partition can not be found... and from reading other forums I think it is looking in the wrong place... but i got this document. Boot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[code]...
View 5 Replies
View Related
Jul 10, 2010
One hour ago I had a nice computer running Ubuntu 9.10 and I ran the update manager and clicked on update to 10.04 LTS distrubution. Now the computer wont boot! I get this message:
init: plymouth main process (3083) killed by SEGV signal
init: plymouth-splash main process (477) terminated with status 2
... and after that nothing happens unless I hit Ctrl-alt-delete. the rest of my family is lining up for a chance to punch me. Yes, I have googled around and I see that I'm not alone about this but how the heck can I get the computer working again? I have a rescue partition so I can boot up another installation on the same machine
View 6 Replies
View Related
May 19, 2010
I previously had Ubuntu 9.x and Windows 7 installed at my laptop after I decided to upgrade Ubuntu to 10.04.
After the upgrade finished, now at the boot selection menu I am able to select Windows 7, but after it starts it tries to fix some errors and says that it's unable to load. Ubuntu 10.04 loads just fine.
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x97646c29
[Code]...
View 2 Replies
View Related
Oct 16, 2010
I have Windows 7 on SSD and have installed Ubuntu on a separate HDD.
When the PC boots, I get the boot manager menu, if I choose Windows 7 it fails with error "no such device or partition".
I can mount the SSD and see all the Windows files still there, I think that the boot manager just needs to be pointed in the right direction but not sure how.
View 9 Replies
View Related
Mar 13, 2011
I have just installed Ubuntu, now when logging into my laptop i am able to sucsessfully load ubuntu but i am unable to load the original OS (windows 7).
The grub 1.9 bootloader gives me the option
When selecting this option it goes to a black screen with a - in the top left of the screen then the grub screen re-appears
I have ran the boot_info_script.
Code:
Boot Info Summary:
View 9 Replies
View Related
Jun 19, 2011
The only options I get for loading Ubuntu 11.04 on my HP 2000-219DX Laptop is: 1. completely remove windows 7 and download Ubuntu, or 2. Manually partition the HD. I'm no computer wiz and am fairly new to GNU/Linux so I really don't know what the problem might be. I need the windows os for work but would prefer to run the Ubuntu distro for personal computing. I have the same problem with Ubuntu 10.10, so no Ubuntu for this laptop until I can get this problem solved.
View 9 Replies
View Related
