Ubuntu Installation :: Windows 7 Doesn't Boot And Wants To Recover?
Jan 6, 2011
I downloaded Ubuntu 10.10. Initially, I had the problem on the "Who are You" screen and was told that lower case letters were needed. Long story short, I was given a work-around since there was a partition on my hard drive. Ubuntu installed correctly - works just fine. However, upon booting up, if I choose Windows 7, it takes me to Recovery and wants to reinstall factory specs. What's the best way to resolve this? Is going back to factory specs and then reinstalling Ubuntu a viable option? This is brand new computer and I've downloaded nothing - wanted to make sure everything was working fine before I did that - so I would have no problem with doing that.
View 9 Replies
ADVERTISEMENT
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
May 2, 2010
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
View 9 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
Feb 16, 2011
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
View 9 Replies
View Related
Mar 1, 2011
I have two partitions Windows XP (which was already installed before Ubuntu) and Ubuntu 9.1 (which I installed later).Now the XP doesn't boot anymore (sorry but I need it sometimes), the Windows screen with the progress bar appears and then it reboots after a couple of secs.
I can access to the XP partition from Ububtu.Of course I don't want to damage Ubuntu during the XP recovery action.
View 9 Replies
View Related
Jun 7, 2010
I wanted to know the solution that if my linux crashes then can I recover my windows in adual boot env.
View 6 Replies
View Related
Nov 24, 2010
I installed Ubuntu 10.10 alongside my Windows 7 installation. The installation was successful, but, now when I try to boot Windows nothing happens (apart from an indefinitely blinking '_'). I tried to do startup repair from my Windows 7 DVD but it is not detecting the hard disk. When I tried to run chkdisk /f from the command prompt it said that the disk is write protected. Later, on using diskpart and list volume the only volume detected is the CD/DVD ROM.
The initial GRUB window points to /dev/sda2 for Windows 7. The Volumes snapshot from Disk Utility is attached!Any idea as to how I can recover Windows 7?
View 9 Replies
View Related
Oct 25, 2010
I let a 'friend' use my laptop over the weekend. Now when I turn it on, it loads the BIOS details, then says no active partition, then no OS cannot be found.
It looks like they have deleted the partition with SuSE with the Grub Loader.
I cannot load up SuSE or Windows 7!
Any ideas on how to recover the boot to load Windows 7?
I have tried using the Windows 7 install disc to repair - but it does not recognise that Windows is installed and wants to do a clean install only.
Is it worth trying to reinstall SuSE and hope it detects Windows on the other partition? (I assume it is still there!)
I cannot get to a command prompt.
View 5 Replies
View Related
Apr 2, 2010
I recently upgraded to 10.04, all went well. Except now Windows 7 does not load. It shows up on the grub menu, but when selected just hangs with blinking cursor?
[code]...
View 5 Replies
View Related
Dec 8, 2009
I have installed Fedora 12 then updated all the packages, after that my windows got crashed so i reinstalled Windows 7 then i lost my grub loader
recover my Fedora 12 with out reinstalling it again
View 2 Replies
View Related
Jan 13, 2010
In my dual booting system consisting windows & fedora 12, for some unfortunate reason I have to reinstall windows .Earlier it was XP. Now it will be Vista. Now how shall I recover my fedora after windows installation. Can I follow the following steps or I have to do something else:
Code:
#grub
#root(hd0,8) [since my / partition is in /dev/sda9]
#setup(hd0)
View 7 Replies
View Related
Oct 24, 2010
i specifically told ubuntu to install alongside my operation system (windows) and instead it installed over windows and deleted all the other partitions... i had 200gb of data that i completely lost is there anyway to recover this data?
View 4 Replies
View Related
Mar 12, 2010
I have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
View 1 Replies
View Related
Jun 21, 2010
Previously I'd installed Ubuntu Netbook Remix (Lucid) on my Acer Aspire One 751h netbook. the machine came with XP installed, so I installed Ubuntu as a dual-boot setup. I had various problems with the configuration of Ubuntu (nothing to do with the boot process, and now solved) so I reinstalled it.
What I'd actually done with the second installation was to install it again alongside both XP and the original Ubuntu installation (maybe that was also a stupid thing, but I didn't know it would work like that). When I realised what I'd done, I did the stupid thing, which was to delete the partitions with the older installation and swap file (using the Disk Utility).
After that, the next time I rebooted I went straight into grub-rescue. I don't know much about this, but I found a forum entry explaining the basics, so I can now issue grub-rescue commands that let me boot into Ubuntu. I've run update-grub and my /boot/grub/grub.cfg file looks fine.
However, I think this only kicks in once I've got past the initial boot menu and have chosen Ubuntu (now on sda5 - hd0,5). My problem is that the files/processes that load the boot menu on startup still have the old configuration, so when I reboot I still go into grub-rescue and I get 'partition not found' (or, since I recreated the partitions, 'file not found') and root is at (hd0,7).
Is there a way, once I've got into Ubuntu, of changing the information in the startup boot menu Alternatively, if I copy my entire file system from sda5 into sda7, would that do the trick?
View 4 Replies
View Related
Oct 16, 2015
My laptop setup is:
sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)
now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:
Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda
Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.
Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda
The latter fails with
Code: Select all/dev/sda/proc not a directory
View 6 Replies
View Related
Nov 19, 2010
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
View 9 Replies
View Related
Jan 3, 2011
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies
View Related
May 4, 2010
I have a dual boot setup with two hard drives. Windows 7 is running on my primary drive with Ubuntu 10.04 on the secondary drive. I installed GRUB 2 to the secondary hard drive, and I'm booting from that. Everything seems to be working well with one problem. Every time I shut down from Ubuntu and tell it to load Windows (it doesn't matter if it's a reboot or power off/on), Windows locks up during its boot. If I power the laptop off and back on, I can select and load into Windows just fine. It just takes two attempts EVERY time.
View 2 Replies
View Related
May 18, 2010
I have dual boot Windows XP pro SP3 / Ubuntu 9.04 and I only use the Windows to download torrents because the download speed on Ubuntu is terrible...
But by accident I pressed the power button when I was downloading in Windows and since then Windows won't boot anymore. Is this a Windows problem or is it maybe that it srewed up my grub? Because I can still select Windows in the grub menu but it stops at "Starting up".
View 9 Replies
View Related
Dec 3, 2010
Yes, I've been trying to get Windows xp and Linux Ubuntu installed on my computer in the boot screen to pick from one but Linux ubuntu works but Windows xp won't even boot.I just sets there With a little line like that just blink for hours and nothing happens I end up just pulling the power plug to restart the system back into Linux because the side by side Install didn't work.There was software, that should allow me to do this but I forgot what it was, software that would allow me to set Linux ubuntu in the boot screen .
View 4 Replies
View Related
Mar 28, 2011
i've had windows all my life. heard about ubuntu 10.0. thought i tried it out. i tried using some dual installation with windows or something (im running, well WAS running vista, btw) i dont know WHAT i did. i got ubuntu working, but Windows does NOT show up in the boot menu?
View 9 Replies
View Related
Jan 10, 2010
I had Windows 7 installed on my PC. After that I installed ubuntu to dual boot the system.Now my windows doesn't start up (As soon as the windows logo appears,it restarts!!!)
I want to do a clean install of windows 7 now removing ubuntu but the windows disk does not recognise any hard disk.
What is the problem? How do I install windows again?
View 6 Replies
View Related
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Jan 4, 2010
I installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?
View 2 Replies
View Related
Jul 17, 2010
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies
View Related
Feb 14, 2010
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
View 9 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jun 2, 2011
I have connected (sata cable I mean) the drive where I have got my Ubuntu installation to another pc with windows 7 64 bits (but I think that 32 and 64 doesn't make difference). Windows 7 doesn't boot. So I thought it may be some kind of issue with the hard drive itself (but the drive is healthy), anyway I have plugged one drive from one NAS (you know, NAS drives are linux partitioned and formatted).Same result: windows 7 doesn't boot.
Windows 7 boot sequence hangs and at the next boot prompts
"Repair windows installation"
"Boot windows normally"
(and obviously none of the options works)
Looks really like that Windows 7 doesn't boot if any linux partitioned and formatted drive is present.
View 12 Replies
View Related
