got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 RepliesI have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies View RelatedI have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies View RelatedJust installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies View RelatedSince upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies View RelatedA failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I have one install (Slack 12.2) on /dev/sda11, and GRUB (GNU GRUB 0.97) boots it without a problem. I just installed a new Slack 13.1 on /dev/sda1, and GRUB fails to boot it as follows:Quote:
grub> root(hd0,0)
> Filesystem id type ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz root=/dev/sda1
[code]....
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies View Relatedi have a 250gb hdd and a 160 hdd. i installed wind0ws 7 on the 250 and then ubuntu 10.10 on the 160. In the past (8.04-10.04) after install ubuntu on boot grub would give me the option to go into ubuntu or windows, now ti doesnt give me that option and boots directly into ubuntu. I dont even think it has recognized that windows is there.
View 9 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I have a dual boot set up on my Dell Inspiron 1525 laptop I have Windows Vista originally installed and i installed RHEL 5 a while ago they used to sit happily together.However After upgrading RHEL 5 from 5.3 to 5.5 yesterday and configuring grub to boot into Vista by default it refuses to do that and boots into RHEL 5 by default.
The laptop used to boot straight into vista but i thought i,d learn how grub works by configuring it, after the rhel5 upgrade. But after changing the DEFAULT value from 0 to 1 and then back from 1 to 0 still grub only boots into RLinux RHEL 5 by default regardless. Can someone help me please i need to make my laptop boot straight into Windows Vista by default and not RHEL 5 This is what my grub.conf looks like
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies View RelatedI recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View Relatedgot four partitions, one for media storage, one with ubuntu 9.10 32bit, one with crunchbang lite 9.04 64bit and one swap partition. The partition with ubuntu has been formated from ext4 to fat32 (with nothing on it, obviously). Whenever I boot up the pc now, I get an "unknown filesystem" error and a grub rescue> prompt. When I try to boot up a live usb image from my usb stick I either get a "linux kernel not found" message (crunchbang lite 32bit) or "initial menu has no LABEL entries!" error (gparted live usb) which changes to "Could not find kernel image: vesamenu.c32" after a couple of seconds. save my media partition or, more importantly, my crunchbang lite partition (which has one single important file on it, I'd love to recover). If this is somehow not possible, then I'd at least like to get my system usable again by succesfully booting from usb. I'm fairly new to using linux. I tried some grub-rescue commands, but not even the "help" command worked,
View 2 Replies View RelatedI'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
The problem i have is that after sucessfully installing Ubuntu 10.04 (64bits) when i start my PC and i get to grub2 and select Ubuntu it will get stuck at a blank screen with only an "_" flickering on the top of the screen. At first i thought "Hey, maybe it just takes a while to boot" but after letting it sit there for about 20 minutes and nothing happening i decided to restart my PC. And then the same thing happened like 5 times. BUT on the 6th try it booted sucessfully! And everything was working perfectly but as soon as i restarted my PC i would encounter the same problem.
Details I should probably mention that i had the exact same problen on the install process. I tried with a CD i had burned the image on and it would show me install options (Try and install, install, etc.) But when i selected either one of those i would get the "_" flickering and nothing ever happening. Then i tried it with a DVD thinking that the CD was the issue. Same thing. After that i tried with a USB drive and i would get the same exact problem, but on the retry on the USB drive the planets aligned in such a way that i actually got the Virtual Ubuntu loaded from my USB drive.
So it installed sucessfully and when i restarted it i got to GRUB and selected Linux and the "_" would start showing and nothing ever happens. On the <random number> of restarts it actually launched and it picked up my audio, video cards, other NTFS drives, etc. But when i restarted i would get the problem again. I even went trough the whole install process AGAIN (getting it to read from the USB flash drive, starting on Ubuntu) and still no consistent results. Though on the second install it didn't pick up my audio hardware nor my other NTFS drives until the second restart where i was able to use Ubuntu normally. I even upgraded what it told me to upgrade. (now i have two "different" versions of ubuntu on grub, each with it's own safe mode only different by a .24 and a .25 on their names) and right after upgrading and restarting it booted immediately. But after that i'm getting the same issue over and over again.
[Code]...
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 Replies View RelatedI had Windows XP installed on my PC then bought a new HDD, installed Windows 7 & Ubuntu 10.10 in dual boot, later I added the Windows XP HDD as an external USB then typed "update-grub".
At boot up the drive appears at the bottom of the GRUB menu but when I select Windows XP it gets as far as the XP splash screen, after a few seconds there is a flash of blue screen with some writing on it then the PC re-boots. Here is grub.cfg:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code].....
I downloaded Ubuntu 10.10. Initially, I had the problem on the "Who are You" screen and was told that lower case letters were needed. Long story short, I was given a work-around since there was a partition on my hard drive. Ubuntu installed correctly - works just fine. However, upon booting up, if I choose Windows 7, it takes me to Recovery and wants to reinstall factory specs. What's the best way to resolve this? Is going back to factory specs and then reinstalling Ubuntu a viable option? This is brand new computer and I've downloaded nothing - wanted to make sure everything was working fine before I did that - so I would have no problem with doing that.
View 9 Replies View RelatedI have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies View RelatedI installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies View RelatedHow do I configure boot so that the computer boots straight into windows xp, unless I press a key during boot?
View 5 Replies View Related